Benches / Vintage and obsolete
G5 problems starting up
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi yesterday out of the blue I switched on my G5 which made the normal click sound it does when you press the on button and the white and red light came on for just a second but the computer failed to start.I thought it could be a printer or firewire causing some problems so I switched off my soundcard and as I pressed the button the computer switched on perfectly.
Today the same has happened only that I have unplugged all of my external devices and the computer does the same click on and switch off procedure all the time.
Any suggestions ??
Thanks
Danny
15 replies
Sign in or join Beachball Help to reply.
- 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
well,I have unplugged the G5 for a while and I have removed the fans and cleaned them,placed everything back after 10mins or so and now everything seems to work fine !!
Any ideas on what could be causing this ?
I´m a bit afraid it will happen again although I have switched off and back on now 3times and it works fine ! - 0
japamac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi-
The first thing to do is to replace the PRAM battery on the logic board.
A dead or weak battery can cause symptoms like you describe.
You don't say which G5 it is that you have, but it is one of the first two on this page:
http://eshop.macsales.com/search/PRAM+battery - 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,thanks a lot for your message.I will replace the battery,hopefully that will solve my problem.
Today I have switched on my G5 and again it´s done the same thing.I have unplugged the power cord for about 10mins or so and after replugging the computer has switched on perfectly.Hopefully it will be a problem of weak battery as you say.
My G5 is a POWER MAC G5,machine model: POWER MAC 11,2 cpu:Power PC G5(1.1)Could you tell me which battery is the one for this PowerPc and if possible where can I find it to replace it ? I´ll try and find pics through internet anyway which might help me locate the battery and how to change it.
Thanks again for your helpDanny
- 0
japamac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi-
PowerMac 11,2 is a Late 2005 dual core processor, PCIe graphics machine.
The battery is this one:
http://eshop.macsales.com/item/Newer%20Technology/CR2032/The battery is located as depicted in the second diagram here:
http://support.apple.com/kb/HT1305Page 68 of this manual has instructions:
http://manuals.info.apple.com/enUS/Power_Mac_G5_Late2005.pdfMessage was edited by: japamac
- 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks Japamac.My G5 continues with it´s weird behaviour,I´ve had it 3days switching on with no problem but today it´s done it again...Switch on and it does the click but refuses to swtich on,I have removed teh power cord for a couple of minutes,back on and now its running perfectly.I have already located the PRAM battery as suggested and have ordered it,hopefully this will solve my problem.
Thanks to everyone for the suggestions/help
much appreciated !!! - 0
Max Miles ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Japamac,
Do you think a weak battery might be causing my issues as well? I have the same G5 (which I just bought) and each time I turn it on a red LED light comes on for a second just inside the front, near the RAM slots. Otherwise it starts up fine and the red LED goes off. Except for twice now the computer has frozen up and the fans start running at high. I have to restart the computer when it does this.
thanks for any help,
m - 0
japamac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi-
The momentary flash of LED #7 is normal.
For your reference, here is an explanation of the LED diagnostics:
http://support.apple.com/kb/HT2652As for the freezes, the culprits could be many.
The PRAM battery is typically associated with startup problems, but replacing it is an inexpensive way to remove doubt.I would:
-Boot to the OS X install disc and run "Repair Disk" on the boot drive with Disk Utility.
If you have DiskWarrior, use that, as it is better.-Boot to the Apple Hardware Test disc, and run the extended test on the machine.
-Download and run Rember to test the RAM.
After doing these things, please let us know if any errors are reported, or, if after disk repair, the condition improves.
- 0
Paul Dadian ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have been having goofy issues with boot-ups not always succeeding; such as hitting the blue screen followed by high fan speed requiring holding the power button in for a forced shut-down and restart. Sometimes it seems that hitting the spacebar or return key can "jump-start" if over this hang but now, from what I've read here I should try reseating my RAM and getting a PRAM battery before I get too worried. I never knew that the PRAM battery could cause some jumpiness, but I guess if there's inconsistant input upon boot-up, the CPU may get confused.
The last two days I've had the system shut-down unexpectedly and have it restart and pick up right where it left off. Not sure if it's related but we'll see if things settle down once booting up is consistantly smooth.
I've did the repair disk and permissions two days ago as well as a firmware reset, and PRAM reset.
Thanks all. We'll see what happens...
- 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi I finally recieved and changed the PRAM battery but no luck !! mu G5 still continues with its strange behaviour,any other suggestions on what I can try to get it back to normal ??
Thanks again
- 0
Anthony massey ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hi
i was having the same start up problems done everything suggested,
swapping ram slots worked for a couple of days
in the end i took every thing out ram/drive/airport/dvd/pram battery.
then took out my divers bottle fitted a thin piece of pipe and blasted it spotless
paying attention to ram slots & out of sight places.
give it a blast it worked 4 me
u can buy small tins of air in most computer shops
good luck. - 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ok,thanks a million will try that !!
- 0
dreidesq ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had the exact same problem. I ended changing the internal battery but it still didn't work until I zapped the pram now everything dandy.
- 0
- 0
kkita75 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi by PRAM you mean the PRAM battery ?
Thanks
- 0
japamac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The meaning is to reset the PRAM after installing a new battery:
http://support.apple.com/kb/HT1379