Benches Vintage and obsolete

7

Classic and 10.3.9

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Here is my problem, I made a foolish mistake, thinking I was smarter than I was and ended up crashing 2 computers Big Time.
One an older iMac Blueberry that had OS-9.2 The other a PowerBook G-4 -133. Mhz with 10.3.9 that had Classic as well with a gig and a half of Ram.
Long story and I hate to bore with the details , but I have restored the iMac with 9.2 and all is well there.
The Powerbook is a different Story, I have 10.3.9 back and everything there is fine as far as OSX is concerned my problem is I HAVE NO CLASSIC. I get the icon up top in the right hand menu bar next to the Airport signal strength meter but when I click it to open Classic,I get a Box opens and says,You may need to install Mac, OS9.1 or later on your computer. To select a System Folder on another Volume, click open classic Preferences. When I click it another box opens that is marked Classic on the top. Two boxes are checked Warn before Starting Classic. and Show Classic status in Menu Bar. There is a note that says Loading System Folder information. but (START)-- (RESTART)-- and (FORCE QUIT are Greyed out.
NOTE: My Powerbook only came with the DVD for Powerbook-G4 15" and 17" Software Install and Restore.
Please Step by Step I need Classic back Bad thank you very much.
Don

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Two methods I can see:

    1) Approved method. Use the software restore disc that came with the powerbook originally to install Classic. You can probably do that as a custom installation.

    2) Less approved method. Copy the folder called "System Folder" from the iMac to the top level of your hard drive in the PB. It should end up next to a folder called just "System" (no "Folder") which is OSX. As long at the iMac has OS9.1 or greater that should work as a Classic folder. Note this will be a slightly dirty version of Classic because it may have all kinds of junk that's fine when used as a boot system but isn't necessary for Classic.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Please excuse my ignorance, but when I put the Original Install disk in the Powerbook, I don't see anything at all about Classic or OS-9.
    Here is an Update though, I got the Original OS-9 Install disc from the iMac and I downloaded it to the Powerbook and have the Applications OS-9 and System Folder are in the Mac-HD which is on the OSX Desktop. What do I need to do and what goes where.Both of these folders are in the Mac HD but Classic or OS9 still doesn't work.

    Message was edited by: Donald Morgan

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Update: mwhaen I try to use the Powerbook Software to install OS9 , I get an error of type 48 occured.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Using the proper installation method of putting OS9 on the computer requires you actually boot to the installer disc and then perform the installation. The other method just has you copy the one folder (not applications) and copy it to the directory I mentioned in the other post.

    I don't own a Powerbook so I don't know the details of the discs.

    Once you have the OS9.1 or greater system folder on the computer you can also open the Classic preferences pane in OSX and do configuration from there.

    It sounds to me like you might have dragged the system folder from a bootable installer disc. If you want to just drag a folder it can't be the one on the installer disc, you'll have to get that off the other computer. If you want to go the installation method then you have to boot to the installer CD.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Classic 09 is not installed by default. Its either on your osx install dvd or on the additional software dvd. Just select install bundled software and make sure the only thing you have checked to install is Classic 09. I'm pretty sure Classic 09 is on the Additional Software disk but either way, its just a matter of installing it.

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The original software set of discs should have had
    an install-restore OS X disc for the PowerBook, &
    it should have had a second disc with additional
    software including the installer for Classic OS9.

    The computer, if it did not support OS9 booting,
    would still have a secondary installer for Classic.
    And if the install-restore disc you have, does not
    include the Applications as-shipped with the PB,
    they would have been on that second OEM disc.
    Same as the last models iBook G4 or a PPC Mac.

    So, perhaps by using the part number from the
    first disc you have, you may be able to find out
    more detail on the second disc you probably
    should also have. A replacement disc from Apple
    of the correct vintage may also have original apps.

    You could try installing a Classic version from the
    second disc of another Mac's install-restore disc
    set, by use of Pacifist. If the version of OS9 Classic
    is one of the last ones, (version 9.5.0 of OS9.2.2)
    that probably would work; and I have been able to
    install an unused Classic from one Mac's install set
    into another, through use of Pacifist. {A side note, I
    I have been able to boot OS9 an older G4 from a
    Pacifist-installed "Classic" version in a dual-boot Mac.}

    While your mileage may vary, there is more than one
    way to get a Classic version into a supported Mac.

    Good luck & happy computing!

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Back to the beginning, it could just be that no System Folder is selected in the "Classic" System Preference.

    Is there any "System Folder" on any of the installed hard disks ? Use Search if you have to.

    With my PBG4 17", the OS9 is offered only as a Partial Restore, ie you run a restore and select to only restore OS9. I don't think it comes in a separate OS9 istaller by then.