Benches Vintage and obsolete

4

PowerMac G5 Error Codes?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Thanks In advance to everyone. I have a Late 2005 G5 Dual 1.8Ghz 6gigs of Ram, Lacie firewire 400 Pci card, internal 4 port sata Card, ATI XT800 MAc video card running tiger(10.4.11). I noticed the Machine acting very sluggish the other day, My first thought was the Memory maybe there are some bad DIMMS, After a restarted things where ok again. Right Away ran memtest, came up with no issues(I know it did'nt test all the memory) But I thought this was a good start. But so far been ok. I then ran hardware test twice at 5Min and 30 sec error Code on Logic Board (Error code 2PFW/3.10: FW) This Looks Like a FireWire Error I think but Im thinking this a memory problem, Some bad Dimms. Does anyone know what this error code is? Thanks for Looking

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That is inded a Logic Board Error to do with Firewire, do all your ports work?

    Have you tried it without FW devices hooked up?

    Tried Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3...

    http://support.apple.com/kb/HT1939

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the response. Strange When I did the test there nothing plugged into the firewire ports. Right Now I have both firewire ports occupied with no issues at all. Not Sure what to make of the error code then.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm just Guessing here, but I think it points to you PCI/FW card.

    Might try AHT with your FW stuff that's on it now, they might be having a soothing effect on the signal.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I will Have to try that. I will let you Know what happens. Thanks for your help