TiBook can boot from external USB devices…
Imported from the Apple Support Forums via the Wayback Machine 🔗
For all these years it has been my state of knowledge that PowerBooks (and PPC Macs in general) cannot boot from external USB devices. After all I had read numerous claims to this effects in these forums and elsewhere. Well, I have just been disabused of this notion and want to share my experience with you.
Recently I made the observation that when restarting my PowerBook, the attached USB card reader's LED would flash up as if the card was scanned for bootable partitions. This made me curious, so I hooked up my external hard disk (which features both Firewire and USB connectivity) to USB and restarted the PowerBook with the alt key held down.
To my pleasant surprise, both the Mac OS X partition and the separate classic Mac OS partition on that drive showed up in the boot menu. Indeed I was subsequently able to successfully boot and run both Mac OS 9.2.1 and Mac OS X 10.4 from my external hard disk via USB!
Next I installed Mac OS 9.2.1 on a USB memory stick (which was not big enough to hold Mac OS X) and booted from that as well. Finally I tried the same on a CompactFlash card using my USB card reader and also had success with it.
Of course the TiBook's USB 1.1 ports are slow as molasses compared to FireWire, but nevertheless I imagine that being able to use them to boot the PowerBook can be quite useful on some occasions and for certain purposes. What do you think?
PS: I also tried a Cardbus USB 2.0 adapter, but it was ignored during startup. I don't know whether the TiBook's old firmware supports booting via any PCMCIA/Cardbus expansion at all, but it certainly would not support USB 2.0 anyhow.
15 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0