Benches / Vintage and obsolete
PowerBook 5300cs OS install
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Please, help me. I'm new to Mac and I don't know how to install an OS (7.5.3 and an update 7.5.5) on my Mac. I don't have a CD reader so it has to be that OS until I buy or borrow a CD reader. When I turn it on, I hear a music out of a built-in speaker(I think it's like an introduction) and than on screen it shows an icon of a diskette and a question mark. I inserted a Network Access diskette, but it says that it needs a different version (or something like that) and a restart button. Maybe it'll help if I tell you that it has a QWERTZ keyboard? Please help me as soon as you can because I don't have money to buy a newer system than this (I payed it 15 euros).
Thank you in forward and I hope you can help.
Stevan
14 replies
Sign in or join Beachball Help to reply.
- 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Stevan,
The music from the built-in speaker is the startup sound. The question-mark indicates that the computer cannot locate a valid system folder.
First of all, you need a startup floppy (the Network Access disk is plain System 7.5 and will not,as you have discovered already, work in the PowerBook 5300cs). You can use the Disk Tools PPC
here instead. However, there is one difficulty involved. The downloaded .bin file must be kept intact until on a Mac, where it is to be decoded by StuffIt Expander. The contained disk image (.img) is used to create a sector-copied bootable floppy. Disk Copy 6.3.3
here will be needed. Use the Make a Floppy command in the Utilities menu of Disk Copy 6.3.3. All this has to be done on another Mac with a floppy drive.Once you have a working startup floppy, boot the PB 5300cs from it. Then launch Drive Setup. Check Zero all data under Initialization Options in the Functions menu, and choose to initialise the hard disk (this will erase anything/everything on the hard disk). When ready, it is possible to drag-copy the system folder of the tools floppy to the hard disk; that will provide you with a temporary system and free the floppy drive for subsequent file transfers.
You have obviously found the System 7.5.3 download at the Apple site. This is seventeen to twenty .bin files, depending upon language version. Each .bin file is small enough to fit onto a 1.44 MB floppy. Since the temporary system on the 5300cs is not able to recognise PC floppies, use Macintosh-(re)formatted diskettes for this purpose. Move all .bin files to the 5300cs hard disk. Use StuffIt Expander on the 5300cs to decode the .bin (drag each .bin file onto the StuffIt Expander program icon). Place the decoded System 7.5.3 files (one .smi and the other .part) in a common folder. Double-click on the first (.smi) file to mount the self-mounting image (the installer will be found inside).
If you do not have a suitable StuffIt Expander for the PB 5300cs, try this: Use a PC(!) to download the MACDISK.EXE file
here. Prepare an empty PC-formatted 1.44 MB diskette via FORMAT A: in DOS or the full formmatting option under Windows. Launch the MACDISK.EXE program on the PC. Follow the on-screen directions. The result will automatically be a Mac-formatted disk with a ready-to-use StuffIt Expander installer.Jan
- 0
Steva ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you, Jan. You've been very helpfull. Butt..I made a booting diskette but when I launch Drive Setup it shows no partition of the hard disk! The "List Of Drive" is empty! It's just blank. Please help, Jan!
Message was edited by: Steva
- 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Stevan,
Do you hear the sound of a hard drive? Has the hard drive possibly been removed? Normally, a functional drive should at least appear in the list.
If no hard drive is installed, you should be able to find a suitable 2.5" IDE unit rather easily.
Alternatively, a (Mac-reformatted) CompactFlash card in a PC Card adapter (something like
this) can be used.Jan
- 0
Steva ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Jan,
I opened it up and a hard drive is there, and it's spining. Maybe it's dead? - 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Drive Setup should at least detect the presence of a hard drive on the bus. Albeit it probably will not do anything good, you could begin by resetting thePower Manager and the PRAM.
- 0
Steva ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Nothing, the same thing is happening. Doesn't see a hard drive at all.
- 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Since it has not been possible to edit messages, I will post this as an addendum:
Then you may want to try replacing the existing Drive Setup version by Drive Setup 1.7.3
here.Generally speaking, any floppy modification must be carried out on a Mac with a floppy drive. If there is not space enough for a new utility, try deleting (move to the Wastebasket/Trash and choose to empty from the Special menu) not used items.
Jan
- 0
Steva ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's OK, Jan. Thank you kindly for all your help. But I decided to give the Mac back. It isn't working. I want a Mac so badly, but I don't have the money to buy a new one, or a good used one.
Thank you again for all your help,
Stevan - 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Stevan,
Sorry to hear that the computer did not wish to co-operate. The reason may well have been a faulty hard drive. As I mentioned earlier, it should not be difficult to locate another drive, but it might be better to buy a new (used) Mac instead. Hopefully, you will find something suitable. Good luck!
Jan
- 0
Steva ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks, Jan. If I find another Mac, I'll be back. 😉
The standard in my country is very low, you know. It's horrible. Still, hope to come back again with a better lap-top soon.Mac fan,
Stevan - 0
Gabriel Diego Teixeira ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
I have the same problem of Steven and tried to install the OS using the MACDISK.EXE in Windows as stated, but the floppy is ejected just after the PB is turned on. Is there any secret to install the MacOS using Windows?
Regards
Gabriel - 0
Grant Bennet-Alder ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The MACDISK.EXE diskette you created does not contain a System File and will not boot your Mac. It has the important "missing link" Stuffit Expander, which is needed to de-compress any other Mac files you download from the Internet.
A diskette inserted at startup has top priority, so if it does not contain a bootable system, it will be ejected. Wait until the Desktop and MenuBar appear, and it should be read and mounted normally.
- 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Gabriel,
The MACDISK.EXE here (BTW, the link apparently is out of order) is, as Grant indicated, intended for someone who needs the decoding and decompression utility StuffIt Expander for Macintosh. This MACDISK.EXE should not be confused with
this MacDisk program (a utility for the handling of Mac disks on a PC).Anyway, if your PowerBook shows a flashing question-mark, you will need a bootable floppy to begin with. The Disk Tools PPC MacBinary (.bin) download mentioned earlier will first have to be decoded (using StuffIt Expander on a Mac). The contained disk image is in the New Disk Image Format (NDIF), which will require Disk Copy 6.3.3 (the Make a Floppy command from the Utilities menu) in order to make a properly sector-copied floppy disk. Disk Copy 6.3.3 is a Mac program.
At least one PC program (WinImage) was capable of creating floppies from certain Mac disk images (of the older Disk Copy 4.2 type), but not from the NDIF. I am not aware of a PC utility that can handle NDIF.
So, the advice in this case would be to ask a friend with a working semi-old Mac (with a built-in floppy drive) for help. I do not know whether it would be possible to use a Mac emulator on a Windows machine to run Disk Copy 6.3.3.
Jan
- 0
Jan Hedlund ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Addendum
Gabriel,
As mentioned above, disk images in the older Disk Copy 4.2 format can be transformed into sector-copied Mac floppy disks on a PC. For your information, a general description:
A utility capable of decoding MacBinary and decompressing StuffIt files on a PC, such as Aladdin Expander 2.0 ( try a Google search or at
ftp://ftp.allume.com/pub/archive/pc/StuffIt_Expander ), will be needed.A disk image utility for PC will also have to be used. For instance, the shareware program WinImage 6.10 (
here).Install the programs on the PC.
Prepare an empty PC-formatted 1.44 MB (HD) diskette through the FORMAT A: command in DOS or the full formatting option under Windows.
Download the .bin file containing the Disk Copy 4.2 format disk image. The Windows operating system may truncate the file name. Drag the downloaded file (as it is) onto the Aladdin Expander 2.0 icon (on the Desktop). Aladdin Expander will decode the .bin file and unpack any compressed StuffIt archive (.sit or .sea) inside.
Look for a resulting disk image file (may be inside a folder).
Insert the empty PC-formatted diskette into the PC's floppy drive.
If WinImage is used, drag the disk image file onto the program icon. In the WinImage application window, select Write disk (from the Disk menu) or click on the Write disk icon. When the operation is completed, immediately eject the diskette.
Normally, .bin files are neither decoded nor decompressed on a PC. The aforementioned procedure is an exception, and it can only be used with DC 4.2 disk images (not NDIF).
Disk Tools PPC is provided as an NDIF image. Just as an example, the At Ease-IDE Utility Disk download
here appears to contain a DC 4.2 image instead (see the text file for details).Jan