Benches Vintage and obsolete

6

Odd Mac SE problem

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have an old Mac SE I mainly use to play Dark Castle and some other old games. Recently it's been giving me some random Sad Macs at startup. I'm running System 6.0.7, boots off a floppy (disk already checked and is perfectly fine), and I have 1MB of RAM. I either get 00000F or 01D47E as the error code. Sometimes it will boot and run perfectly fine. 00000F is a general error, but I have no idea what that second code could mean. Anyone have any clues?

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    Craigwd_2000

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    According to Apple Knowledge base codes ending in E on the second line indicates a Failed Data Bus test. In short your computer may have two bad memory modules. I know that much because in older Macs such as the SE memory modules are installed in pairs of two. Here's the URL of the Apple Knowledge Base article:http://docs.info.apple.com/article.html?artnum=7748. Basically that means you'd have to swap out each module to determine which one is bad. If you're lucky it might just mean that you should get some contact cleaner and spray it on the RAM modules' contacts and all four RAM slots. This will help to clean any debry from the RAM modules or the slots that might be causing a problem. If that doesn't work then I'd recommend you test for bad RAM by taking out one module and replacing it with a known good module (in short one you know works). This would also be a excellent excuse to upgrade to a full 4 MB of RAM (taking apart the Mac will be hard enough anyways). You should let the Mac SE sit for a day or more before attempting to open it; dangerous amounts of electricity will be present inside if it was just on. The tools you'll need will be a T-15 Torx driver and contact cleaner; one of which you can buy at Sears. You can get the contact cleaner from a Radio Shack store; if not; you can probably order it from http://www.radioshack.com.

  2. 0

    Craigwd_2000

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    According to Apple Knowledge base codes ending in E on the second line indicates a Failed Data Bus test. In short your computer may have two bad memory modules. I know that much because in older Macs such as the SE memory modules are installed in pairs of two. Here's the URL of the Apple Knowledge Base article:http://docs.info.apple.com/article.html?artnum=7748. Basically that means you'd have to swap out each module to determine which one is bad. If you're lucky it might just mean that you should get some contact cleaner and spray it on the RAM modules' contacts and all four RAM slots. This will help to clean any debry from the RAM modules or the slots that might be causing a problem. If that doesn't work then I'd recommend you test for bad RAM by taking out one module and replacing it with a known good module (in short one you know works). This would also be a excellent excuse to upgrade to a full 4 MB of RAM (taking apart the Mac will be hard enough anyways). You should let the Mac SE sit for a day or more before attempting to open it; dangerous amounts of electricity will be present inside if it was just on. The tools you'll need will be a T-15 Torx driver and contact cleaner; one of which you can buy at Sears. You can get the contact cleaner from a Radio Shack store; if not; you can probably order it from http://www.radioshack.com.

  3. 0

    Denis Eddy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    upbeatpenguin

    When Sad Mac appears is usually more revelatory than the minor code. Possibly there are few still alive who can explain the minor code with certainty. The major code (0F) certainly signals a software error: a '68K exception'. Because Sad Mac is occurring at startup, it probably signifies that your floppy disk (a 1.44MB, since you are using System 6.0.7?) is, despite appearances, letting you down. The cause could be a mechanical fault in the diskette, loss of alignment in the FDD, or software corruption on the diskette, any or all of which can affect the System software as it loads. A floppy-driven Mac is increasingly at the mercy of diskette/FDD problems as time passes.

    Try downloading System 6.0.8 from
    here with the QS, but don't decompress the files before you get them to another (preferably older, eg 68k) Mac. Make two copies of both the startup disk and the tools disk against a future recurrence of floppy disk ageing.

    PS (later). Craigwd_2000's suggestion to max. out the RAM is well worth your while to follow. 1MB 30-pin SIMMs are still readily available.

  4. 0

    upbeatpenguin

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I was thinking it might be the disk drive. The Sad Mac occurs after the startup beep, and sometimes about half a second after "Welcome to Macintosh" appears. It's also doing odd things when I put in a disk - when it's waiting, I'll put in any disk, and it spits it back out and the question mark stops flashing and just stays there. If I try to put the disk back in, then I also get the Sad Mac. Other times, it will start up completely normally.

    I am a little bit afraid of opening the case now...thanks. 😝 I'll clean the contacts when I get a chance and report back. Also, I heard that 6.0.8 just included some printing enhancements - do I really need it? =/ I have more than one copy of the 6.0.7 disks.

  5. 0

    Denis Eddy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    upbeatpenguin

    Sad Mac's appearance after the splash screen is a very different kettle of fish from appearing immediately after the startup chime, and almost certainly is System software-related. Suspect your floppy diskette, or, conceivably, your FDD. If you have another copy of 6.0.7, well and good, and you can soon check your floppy drive with it if you have not already done so. Apart from the printing enhancements, 6.0.8 is incrementally more stable, but that doesn't mean that 6.0.7 is not a good version.

  6. 0

    AppleIIFreak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can get the tools to open SE at ebay/sunrem at the moment.

    You may also look at whoopis.com for a service-manual including security rules with high voltage.

    IF you open SE, you should check the battery also

    IIe /IIgs/SE/Classic/LCII Mac OS 8.6 or Earlier