Imported from the Apple Support Forums via the Wayback Machine 🔗
Brianne Bishop writes:
I'd go to the Genius Bar with these questions, but I'm skeptical that the "Genius" wouldn't have the legacy knowledge-base needed for my questions.
1) I have a LaserWriter 4/600 PS. I'm starting to get a vertical, light-solid band of ink-schmere down each page I print... does that mean my drum is going? I have this vague recollection from a distant past life with Macs that this is what happens when the drum goes.
2) If so, do you think I could even find a replacement drum - anywhere? Do you know where?
3) I have this printer hooked up to my iBook via a Faralon box, since the printer is local talk and the iBook only has the Ethernet & USB ports. Is there a better way?
4) I have piles of CAT5 cables from a past life working for networking companies in (sadly) Windows environments. None of them work between my iBook to the Faralon box, or the cable modem, except the one cable that came with the Faralon box. It is also a CAT 5 cable. What gives?
5) If it's time to purchase a new b&w laster printer, any favorites? Oh, and I'm poor. Please go easy on the $$ for suggestions. My preference is for an HP or another Apple, based on the ease of use and support built into the products, but I can probably only afford an HP.
6) I'm still running system 9 because when I bought my iBook from a re-seller, it came with both 9 & 10 but they said 10X was too unstable, and wouldn't run with my legacy software. Can I still run my legacy software on system 10X? Specifically, MSWord v6.xx and Excel 5.xx. I prefer using these older versions since the file size is smaller, the keyboard shortcuts have not been taken out completely, and navigating the features is easier to me. What are your thoughts.
Imported from the Apple Support Forums via the Wayback Machine 🔗
1) I have a LaserWriter 4/600 PS. I'm starting to get a vertical, light-solid band of ink-schmere down each page I print... does that mean my drum is going?
That is possible, but the first step is to open the lid and remove the cartridge. To remove the cartridge in this printer, you have to rotate it around its long axis. That is exactly the action needed to re-distribute the toner inside the cartridge. Rock it a few more times in a similar fashion, and then re-install and test.
I have this vague recollection from a distant past life with Macs that this is what happens when the drum goes. 2) If so, do you think I could even find a replacement drum - anywhere? Do you know where?
This printer has the drum and toner in one cartridge. Apple stopped selling these under the Apple brand years ago. If you see one available under the Apple brand, you may want to pass on it -- it may be a bit stale by now.
But this same "marking engine" was incorporated, with custom "imaging and I/O" boards, into a number of different printers, including several from HP. This site has a list of the other printers that use the same marking engine (and therefore the same cartridge):
Imported from the Apple Support Forums via the Wayback Machine 🔗
3) I have this printer hooked up to my iBook via a Faralon box, since the printer is local talk and the iBook only has the Ethernet & USB ports. Is there a better way?
4) I have piles of CAT5 cables from a past life working for networking companies in (sadly) Windows environments. None of them work between my iBook to the Faralon box, or the cable modem, except the one cable that came with the Faralon box. It is also a CAT 5 cable. What gives?
If you have Broadband Internet, via Cable or DSL, the better way is to use these same components and hook the Farallon box up to your Router or Switch. The Farallon box is converting AppleTalk-over-Ethernet to AppleTalk/LocalTalk. It allows the printer to be seen and used by all AppleTalk-over-Ethernet capable computers on your home network. (That's all the Macs and any PCs that have AppleTalk printer drivers or AppleTalk file Sharing installed.)
There are two kinds of Ethernet cables. "Patch" cables are wired straight through. If you look through the clear connector at the end of the cable, non-clip side, you can see the individual colored wires. In a straight-through cable, the color pattern is the same at each end. The cables from you old job are probably like that. The are used to go from a Router or Switch to a Computer (or other Terminal device). Terminal device in this context means "at the end".
"Cross-over" cables are wired differently at each end. When you connect computer-to-computer (or Terminal device to Terminal device) you use a cross-over cable. That Farallon cable is undoubtedly a cross-over cable.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
6) I'm still running system 9 because when I bought my iBook from a re-seller, it came with both 9 & 10 but they said 10X was too unstable, and wouldn't run with my legacy software. Can I still run my legacy software on system 10X? Specifically, MSWord v6.xx and Excel 5.xx. I prefer using these older versions since the file size is smaller, the keyboard shortcuts have not been taken out completely, and navigating the features is easier to me. What are your thoughts.
Do not invite abuse and spend money unnecessarily by converting to a different operating System unless you find something about it compelling. What you have works for you and is familiar. Use it until it no longer meets your needs.
With at least 256 MB RAM and 6 GB or more free disk space, Mac OS X 10.2 Jaguar is pretty stable, but very cranky about installation. 10.3 Panther is more stable, faster, and more compatible but is not directly supported on clamshell iBooks without a FireWire port. 10.4 starts to demand even more memory and disk space, has way more bells and whistles, and is not quite as fast on older Macs. It also starts to make compromises to support Intel Macs that you may not like.
PowerPC Macs (But NOT MacBooks or any other Intel Macs) can run "Classic", an emulation of OS 9 that runs many (but not all) OS 9 Applications.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
7) If/When I do decide to upgrade to Mac OS X, will my printer still work?
Yes. I print with a LaserWriter 4/600 PS using Mac OS X 10.3. The Farallon converter is the same solution for Mac OS X, "Classic", and my older computers that still run 7, 8, or 9 directly. The printer appears and is useable by all the computers in the house.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'd go to the Genius Bar with these questions, but I'm skeptical that the "Genius" wouldn't have the legacy knowledge-base needed for my questions.
If the folks at the genius bar have a free moment, they will be training on the new iMacs announced in the last few days and other stuff currently for sale at the store.
If they happened to already know about older Macs, great! If not, Apple is not spending the time/money to train them on legacy Macs and third-party solutions not currently for sale in the store.
One of the great things about the forums is that there are many more readers than posters. If anybody writes something that a reader disagrees with, they seem to feel free to jump right in and offer a different point of view.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
WOW! This is so great! What a relieg to get reliable info on legacy stuff! You are the bomb!
The I-net provider's cable modem only has 1 port, which is hooked to the Netgear VPN Firewall box, which has 8 ports. We have my husband's PC hooked up to that for work, which determined the choice in Firewall VPN-wear. I don't know if it's a switch, hub or router. (?) It doesn't say. So you are saying hook up my Faralon Box w/Printer to the Netgear box, then my iBook to the Netgear box and I should be able to see/print to my LW4/600 & internet all at the same time... provided I use cross-over cables rather than patch cables? Is that right? That would be soooo cool!
Also, do you think I can get the right cross-over cables at a Radio Shack? That's the best I've got available here in the middle of CA, untill the next time I travel up to the Bay Area.
Many thanks!!! Brianne
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, thanks for the tips on OSX. My iBook has 1 ethernet port, 2 USB ports, and I think the other is a Firewire port. (sorry for mis-spellings on any of that) So, if that is true, based on your info, I could conceivably run OSX.3 Panther and still print.
Do you know if it would still run MSWord 6.xx or earlier, Excel 5.xx, and Eudora v 6.0? If I upgrade OS SW then I can use a more compatible browser like Firefox (I'm hoping) or at least the latest versions of Netscape. This is a gating item I have in using my computer vs. my husband's when web surfing. Also, my "built-in memory" is 384MB. Is that enough? Can I cram more into this laptop if I need it? Also, looking at my System Profiler, it says that my Ethernet speed is 10Mbps. Is that why my laptop runs on the internet so slow? Oh, and is "Classic" an OS?
Brianne
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, that was my general thought about the Genius Bar (great marketing name!). Although I will be going in to purchase a mouse, and maybe a keyboard to use with my laptop. The track pad REALLY slows me down and makes me nuts.
Originally, I wasn't sure that I would have permission to use this forum... since I haven't purchased anything lately. I would agree, I value forums much more over general/available tech support - especially when you get into legacy-ware. Again, many thanks.
Brianne
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hook up my Faralon Box w/Printer to the Netgear box, then my iBook to the Netgear box and I should be able to see/print to my LW4/600 & internet all at the same time... provided I use cross-over cables rather than patch cables? Is that right?
Not quite. The Netgear will be non-Terminal equipment (formerly referred to as Data Communications Equipment DCE). It is not Terminal, so its ports are wired the other way. From its ports to the Farallon or Computer should use straight cables (of which you said you have plenty).
Just for information: Ethernet cables are becoming so common you can get short ones at Lowes, Home Depot, Circuit City, Fry's, Best buy, and other electronics/TV/Stereo stores.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The "Classic" environment is Mac OS 9, with some pieces modified and a few replaced so that it can run as an Application under Mac OS X. Many well-behaved Application programs will run in this environment, but you do not have direct access to Hardware. Instead, there is an emulation of many functions using Mac OS X as the authority.
One surprise when using Classic is that you do NOT get access to the OS 9 Finder, Instead, you use the Mac OS X Finder. There is an emulated Apple Menu available, so many Apple Menu items (except those that directly control Hardware) can still be used. You do have access to the Chooser, and can still use OS 9 printing.
Like taking a lover, changing to something you will interact with so much needs to be compelling. You should have a good reason for moving to this situation, not just that it seems like the thing to do.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry for the delay in getting back to you... of course I started all of this right before I had to go out of town. Right before I left, I tried shaking the cartridge to redistribute the ink. Then I tried printing again and got the same result. What are the chances that buying the $40 replacement cartridge won't fix my streak problem?