Benches Vintage and obsolete

3

Replace/Add HDD (128 GB limit ?)

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a PowerMac G4 (AGP) with the following specs:

Machine Name: Power Mac G4 (AGP Graphics)

Machine Model: PowerMac 3,1

CPU Type: PowerPC G4 (2.9)

Number of CPU's: 1

CPU Speed: 450 MHz

L2 Cache (per CPU): 1 MB

Memory: 1.12 GB

Bus Speed: 100 MHz

Boot ROM Version: 4.2.8f1

Serial Number: removed

ST3160023A

(Seagate Barracuda 160 GB HDD)

Capacity: 128 GB

(should be 160 GB, but I understand G4 will only

‘see’ 128 GB max, maybe I formatted it wrong, initially. I

don’t know)

Model: ST3160023A

BSD Name: disk0

Protocol: ATA

Unit number: 0

Socket Type: Internal

OS9 Drivers: Yes

S.M.A.R.T. status: Verified

Currently formatted as follows:

OS X System: 40 GB

OS 9.2.2 System: 16 GB

File Storage: 70 GB

File Storage: 2 GB (some of my old OS 9.2.2 apps won’t see storage

bigger than 2 GB)

File Storage: 130 MB (left over during partitioning, not sure how this

happened)

The HDD seems to be getting noisier and I am worried I might lose it.

My plan is to install a second hard-drive, format it and partition as HFS+ for OS X and OS 9.2.2. I am not sure of its size. It is an ATA/IDE drive, (second drive in a PC that I don’t use much). I believe that it is 80 GB, however, it could be a 160 GB or 200 GB. The PC is not here, but I will be getting it to check.

My questions here are as follows:

Is true that my G4 will only ‘see’ 128 GB? I am under the impression that there are ways to get around this with proper portioning. Is that true? If so, how do I accomplish that? I generally am in the habit of using master/slave configuration. Should I stick with that or use Cable Select (CS)?

I have Carbon Copy Cloner v2.3. Can that be used to directly clone the existing OS X 10.4.11 system to the partitioned new HDD and have it work properly?

I have no concerns transferring 9.2.2. I have done that many times, by simply copying it.

Then, can I reformat and partition the original HDD such that I will have access to all 160 GB, for example, (2) 80 GB partitions or 120 GB/40 GB, etc?

Thanks in advance for any suggestions and advice.

Dave

Message was edited by: Moderator

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    gse1.woody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There is a program called "*ATA Hi-Cap Support Driver" +(Intech Software Corporation)+ that overcomes the 128GB limit. I used it on my Sawtooth with a 160GB drive, up to OS X 10.5 and never had any problems.

    http://www.speedtools.com/ATA6.html

    Message was edited by: gse1.woody

  2. 0

    Texas Mac Man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Your are limited to 128GB, except for the alternatives below. Partitioning won't help you avoid the 128GB limit. Use the Master/Slave jumpers on the two hard drives. You can use Disk Utility on your current OS X system to format & partition the new drive. On the new drive, be sure to check Install OS 9 drivers when you format it to HFS+(Journaled). While booted in OS X, you can use Carbon Copy Cloner to transfer your current OS 9.x /files to the new drive's OS 9 partition & your current OS X/files to the OS X partition.

    Look at these links.

    What Macs natively support large IDE drives? (over 128GB formatted)

    http://forums.xlr8yourmac.com/action.lasso?-database=faq.fp3& layout=FaqList&-response=answer.faq.lasso&-recordID=34188&-search

    How Big a Hard Drive Can I Put in My iMac, eMac, or Power Mac?

    http://lowendmac.com/macdan/05/1024.html

    Using 128 GB or Larger ATA Hard Drives

    http://support.apple.com/kb/HT2544

    The Power Mac Storage FAQ

    http://forums.macnn.com/65/power-mac-and-mac-pro/246391/the-power-mac-storage-fa q/

    Possible Alternative - SpeedTools ATA Hi-Cap Support Driver: Allows the use of extended capacity ATA drives (drives greater than 128 Gigabytes in size) on older (Pre Mirrored Door) G4 and G3 Macintoshes running MacOS X versions 10.2 and later. Cost $24.95

    http://www.speedtools2.com/ATA6.html

    Possible Alternative 2 - Larger than 128GB drives can be used by adding a PCI ATA/100 or ATA/133 controller card, one which is 48-bit LBA compliant; or by adding a PCI SATA controller card and using SATA drives.

     Cheers, Tom 😉

    User uploaded file

    PS: Don't put you serial number in posts. A forum moderator will delete.

  3. 0

    Limnos

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have Carbon Copy Cloner v2.3...

    You should check for a newer version if you're using Tiger. I think it's at 3.1.1 now.