Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
I am about to help my grandson replace a hard drive (and upgrade the RAM) on an iBook G4 800mHz laptop. The current HD is certified dead by our Apple Genius Bar genius, and with any luck, that's all. (I am able to boot the machine from an external drive OK)
He has purchased a Fujitsu 120GB HD from OWC (likewise a 1GB RAM chip) after careful research into compatibility with this particular iBook model. We have been studying the IFixit and powerbookmedic manuals and are thoroughly intimidated by fears of ripping connectors from logic boards (well, I'M intimidated at least!). Bought the right and proper tools, torx and philips drivers and spudgers and all. Right.
My question is this: the HD arrived with a tiny blue part taped to the package....looked like it may be a jumper (I remember this from when friend helped me replace my G4 power pc HD). Does this drive require the placement of a jumper? Also, is it always necessary to format the HD before installation of the OS? Is it really as simple as taking the old drive out and putting the new one in exactly the same way? The instructions look very straightforward, tedious, but straight forward?
Any wisdom before we start to pry open those fragile bits? thanks a bunch!
Imported from the Apple Support Forums via the Wayback Machine 🔗
don't do it.
get a certified tech on craigslist to do it for $50.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Good advice, truly.
But we do want to learn more, to advance our latent geekiness, to understand the machines a bit more. So, if we're fool enough to go forward?....
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
it's not a big deal really, sometimes though people report damaging their laptops when trying to do repairs themselves - broken connectors, stripped screws, ripped cables, dead machines as a result etc.
on iBook G4 taking apart plastic case is not that easy, also you'd have to deal with about 30 screws of maybe 4-5 different types and sizes.
the drive probably will work without any jumper changes, you'd need to format (erase) it before the OS install.
good luck!
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey David, Well as Arnie says there are certain pitfalls. I'm currently not advising people not to detach the power connector from the main power button. It sits down in a well and is very hard to take out without ripping the socket of the logic board: http://discussions.apple.com/thread.jspa?messageID=7143904� Email me for complete instructions. Richard
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
David, you can't do better than follow spudnuty's (Richard's) advice. He's apparently done so many of these that he's regarded as an expert on this subject on these forums.
Before coming across his most recent recommendation re the power lead I changed the HD in my iBook without drama or damage but that was probably because I had someone helping me who was much more patient and calm than I & who took over when it came to the fine power, speaker and trackpad leads.
If you decide to go for it, take it slowly, follow Richard's and iFixit's advice and download iFixit's screw guide. I used an ice cube tray to keep track of the multitudinous sizes... If you have another computer online, refer to iFixit's instructions as you go, otherwise print them off before you start.
Good luck,
Adrian
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Duplicate deleted.
Message was edited by: Adrian Clarke.
Duplicate post deleted. Glitch in discussions... 2nd time in 2 days this has happened to me. Off to 'Feedback about Discussions. to moan.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thank you all so much, I did not mean to mark these "solved" but rather "helpful", as I am enjoying getting these tips, which somehow never occur in the guides, but come only from experience!
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Richard,
I would love your complete instructions, but how do I email you?
David
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
...but how do I email you?
Click on his profile (name) to the left of his post.
Have fun,
Adrian
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey thanks! You can tell I don't use the discussions (as much as I should!)
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Looking at instructions, I was wondering if I am going to need to buy any tape to replace anything I remove during the deconstruction?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
David52 wrote: Looking at instructions, I was wondering if I am going to need to buy any tape to replace anything I remove during the deconstruction?
I didn't. From memory the only things stuck down were the DC-in board cable and the HD cable, both of which were sticky enough to go back in place without problem.
Adrian
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
David, As Adrian says use the same tape. Actually the service manual say the same thing, i.e. to remove it carefully so it can be reused. It's called Kapton tape ( from 3M of course but apparently developed by DuPont ) and I've been interested in it for a long time since it works so well. So I Googled it ( Google is your friend ) and came up with tons of sources. This one was very informative: http://www.technicaldevices.com/Details.cfm?ProdID=361516
"PRESSURE SENSITIVE SILICONE ADHESIVE SYSTEM ; TRANSPARENT AMBER COLOR ; USED FOR FLAME RESISTANT ELECTRICAL INSULATION, WIRE AND CABLE WRAP, WIRE BUNDLING TERMINATION, SPLICING OF HI-TEMP REFLECTIVE THERMAL INSULATING FILM ; EXCELLENT SOLDER MASK FOR CIRCUIT BOARDS ; RELEASE SURFACE FOR HEATED PLATENS IN HEAT SEALING / LAMINATION ; RESISTS HIGH HEAT OF MOLTEN SOLDER TEMPERATURES OF 100ºF - 500ºF"
Oooh now that IS some nice tape. Might have to get some of that and there are a lot of places where it's real cheap. I had assumed it was real expensive and according to Electronic Goldmine it was: "Most distributors sell this roll for $50 to $60." They're selling theirs for $24 but that other place $1.00 for what looks like the same stuff. Wait check that, if I'm reading that right it's 6" for $1 and the other place has 36' but it's only 1/8" wide. Crap.
Richard
Message was edited by: spudnuty
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"PRESSURE SENSITIVE SILICONE ADHESIVE SYSTEM"
Now doesn't that sound like anything but tape! We need it!! I do recall seeing some site selling cards of tape strips for a lot of money. I'm glad I can re-use whatever happens to come off, if anything needs to be removed. Looks like Monday may be the day we give it a go.
On another note, where would I post a question about using an external hard drive? I want to use a 250GB LaCie rugged small drive for trouble shooting and temporary backup and I need something to use on PPC and Intel, Tiger and Leopard. So I need to know if, and in what fashion, I need to partition and install OS's and utilities and all that. Which is the best forum to put that out to?