Benches Vintage and obsolete

9

AHT Error codes

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi-

Does anyone know where to get Article number 113867 which explains the Apple Hardware Test (AHT) Error Codes for AHT v1.2.6 for Power Mac G4 computers? Trying to troubleshoot a problem child, and it would be most helpful to have that info!

The link to the error codes on the AHT v1.2.6 Article number 113868 results in "Document not found".
A search of the Apple Kbase for Article number 113867 results in only the article number 113868.

Kind of an "Escher-esk" loop of failure.....

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello! What error codes are you seeing? Tom

    Message was edited by: Thomas Bryant

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Tom-

    "Type? error -65536" is the one error I have gotten before the AHT freezes, and that was prior to initiating the test.

    Beyond that, the test will run through the logic board, issue a "passed" message, and freeze at mass storage- this is with or without hard drives connected. ATA controller problem???
    I guess I am looking for more than the basic explanation of AHT that Apple provides in the kbase. I would really like to know the sequencing of the tests, so that maybe I can narrow the hardware problem down at the point the test freezes.

    As it is, the G4 GE 2x450mhz is responding randomly to Disk Repair, PRAM reset, Archive and Install, Erase and Install, substitute CPU, and PMU reset. All have returned the system to bootable service, at least once, but always end with the system freeze, and subsequent failure of the system to load.
    Stripped to the shipped configuration, with or without known/tested good CPU, HDD, RAM, Gcard, Keyboard & Mouse substitutes, the system either freezes at gray Apple screen, or, freezes shortly after loading the OS. Occasionally, the desktop is reached, but invariably freezes within moments.

    Currently, after an open firmware "reset-all", the system refuses to move beyond the gray Apple screen.
    The only thing that does work (most of the time), is booting (with much effort) to the OS X install disc (10.4.3), and running whatever utility or installer I choose. The origional system/software restore CD's (OS 9) result in a blank gray screen.......

    So, even with the AHT error codes, I think the problem won't be ID'd with them. Would be nice to have the article Apple references, though!

    Chris

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Chris,

    It seems I am having the same G4 trouble as you: freezes with random results from various fixes/reinstalls/resets; hardware test aborts, etc:

    http://discussions.apple.com/thread.jspa?messageID=5437196#5437196

    I suspect a faulty processor or logic board with mine, but just wondering if you had made any progress?

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi nksk-

    The machine in question has been retired. I'm 99% sure it is a faulty motherboard. My belief is either the ATA controller of the MOBO is bad, or, the PMU is bad.

    All components of the sick machine have been placed into another (all except the MOBO and power supply). The "new" setup works great, varifying the HDD's graphics card, DIMM's, PCI cards, and optical drive from the sick mac. Now, all components make up a very healthy dual 500mhz Gigabit Ethernet G4.

    I'll be setting up yet another machine with a known good MOBO, and get the final word on the CPU in a couple of days. The CPU, though, was not the problem as far as my testing was concerned.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Japanmac!

    Could you ask your friend whom you were speaking to what the error code for my problem is? post/16/2112.

    Just a quick note. I downloaded applejack and allowed it to test my memory and according to rember and both memtestox in applejack, my memory is working great, but yet AHT cd says otherwise. I am starting to lose faith apple, now that we know we will be unable to run the next os. I wouldn't be surprised to see many longtime powerpc users jumping to PC's because of the decision to not allow G4's from digital audio and up not to run the latest os.

    But, this is immaterial right now. I want to know what the post/16/2121 error code means?

    Thanks,

    Nadav

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Nadav-

    I'm sorry, but I don't have any more information on that error, beyond that which I already posted in your other post:
    http://discussions.apple.com/message.jspa?messageID=5415415#5415415

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Japanmac,

    Just wanted to let you know that I re-ran the apple hardware test cd and it turned out to be a fluke. The error really was never there. Besides, I am now passing on the DA to my son who is 8 years old. I firmly believe at 733mhz and almost over 1 gig of ram, it will see him all the way until he gets out of middle school. While, I stepped up to the G4 MDD 1.25DP and boy must I say that this machine is WICKED FAST!!! At 2GB of memory this shows it! Now, the only thing left to do is to get sata hard drives and possibly upgrade the video card.

    Also, in your opinion, would I really really see any MAJOR increase in performance between what I have now and a 1.42 DP processor card from the MDD 1.42? I know I sound greedy here, and you already know what I use my system for. I was just wanting to see if it was even worth it to jump to 1.42 by popping out the 1.25 DP for 1.42 DP.

    Either way, I am very happy.

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi-

    As long as the DA is running well, this is all that's important.

    Unless you have the 1.42 DP card sitting around, I think your money would be better spent on a graphics card upgrade. Tiger, and forthcoming Leopard, unload a lot of processing onto the GPU of the graphics card, to free up the CPU. The speed difference in the processors won't be as noticeable as a speed increase in the graphics processing.
    An ATI 9600 ( can support the 30" ACD), or the faster ATI 9800 would show real gains over the stock 9000, or the optional Geforce4 Ti.

    http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=171&type=Video&TI=1527&shoupg rds=Show+Upgrades

    Using SATA technology, as well, is a way to get tangible performance boosts. In selecting a SATA controller card, make sure the maker specifies the card as bootable. Beyond this, the new, large drives from WD, Hitachi and Seagate will give real performance gains over the ATA.

    http://www.storagereview.com/articles.sr

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, my son's or what will be my son's computer, the DA is running fine. I thought so! So, really the difference in speed between the 1.25 and 1.42 is really nothing to worry about it seems? And although I did see a 1.6 and 1.8 dual upgrade for my machine, and based on what I use my machine for + the fact its already at 2GB, I don't see the reason for a few ghz jump in speed.

    Yeah, I have the radeon 9000 pro in my system. A good card, similar to the DA card I got which is a radeon ati 7000 agp 64mb card.

    I am really getting attracted to this sata and sata ii thing. I might give that a whirl. I don't know if I will goto Leopard or not since it may not work on a G4 - EVEN WITH DUAL PROCESSORS!

    Oh, and no I don't have a 1.42 DP card sitting somewhere. It too is at 167 bus which given the mathematics is not really a huge if any speed jump, at least to my naked eye.

    I think this will be the LAST machine I will have in terms of G4. I intend to keep this for a while longer. I am already seeing the impressive power of dual processors, something of which I have never ever owned in a mac before.

    Oh, I got my original CD's and AHT cd coming to me tommorrow. Now, I will be able to dual boot into OS 9.2.2

    Nadav