Benches Vintage and obsolete

10

Pismo Keyboard Issues

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

on my Pismo powerbook, the keyboard seems to not work, except for a select few keys (the brightness, and volume keys) nothing else works anymore. The caps lock light does not light but the light next to the num lock is always lit. I have reset the PMU, but cannot reset the PRAM. I have hooked up an extra USB Keyboard to it, and it works fine. Does this sound like a dead keyboard in need of replacement to anyone or any suggestions about this? OS X 10.4.2

10 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you can find another Pismo somewhere, I would try connecting the keyboard to another Pismo to see if it would work on it.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I tried another keyboard...no luck

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Clark,

    I would reset the PRAM in a final attempt in this manner: Remove the main battery, disconnect the power adapter, and remove the optical drive. Lift off the keyboard; you will see the brown, circular backup batteries in a black case next to the palm rest. There is a red/white/black pigtail running to the logic board; carefully pull up on the white connector to disconnect it (needlenose pliers work well)...this allows the power manager and PRAM to clear. Wait about 5 minutes, then reconnect everything.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    did that last night. No luck. I am currently trying another "clean" install of OSX reformatting the drive to see if that may help...ran disk utilities and there were a lot of permission issues. Another problem that confuses me is the only cd I can start from is OSX 10.4 no other cd (drive 10, OS 9 install, Techtool pro, diskwarrior) will start the computer. To start with 10.4 I had to unplug the hard drive, allow the computer to boot the cd, select startup disk, and plug hard drive in in the short time when the power is down for the restart. There was no other way I could even get the cd to run. I've tried removing the top ram chip thinking there may be a conflict with that but to no avail. Reset the PMU, unplugged the BIOS battery, removed the modem (thinking conflict there) the firmware listed in profiler is the current version, so no problems there. when starting up, the internal keyboard is resonsive because I can start in verbose or single user mode. I also tried a "safe" startup by holding down the shift key. Is there anything else you can think of?

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Clark,

    If the 10.4 disk is DVD and all the other disks are CDs, and you have the DVD-ROM drive made by the company LG (the System Profiler should report this), chances are the drive is failing, a common problem with these drives. Usually the CD-side of the drive fails first.

    There is also another way to select the startup disk...hold down the 'option' key when booting. This should bring up the Startup Manager and any bootable volumes will be presented. If the CD-side of the drive is failing, it may or may not list the CD, or if it does, it may not start to the CD.

    If you have access to a FireWire CD-RW, you can boot CDs with it.

    If you have access to another Lombard or Pismo, swap optical drives and test.

    If you can boot to a pre-OSX CD and the keyboard still does not work properly, I would guess the logic board is kaput.

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There is no problem with the cd/dvd drive. all boots fine for the 10.4 dvd
    "option" key doesn't work, as the keyboard doesnt work. "option" key on external key is bypassed since it is not the internal one at startup.

    The keyboard not typing anything is the issue, not the hard drive nor the optical drive.

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Clark,

    There used to be a thread in the powerbook forums containing hundreds of posts regarding the Pismo's optical drive. It has two lasers, one for the CD and one for DVD. As I said in the previous reply, your symptoms of success booting a DVD but not CDs is a classic failure scenario. This is why I suggested checking to see if you have the LG drive and also finding another drive to swap for testing.

    I also never suggested you had a problem with the HD. I did suggest booting to a pre-OSX CD (if possible) to check keyboard performance. This would also take the HD out of the loop in the event the software on the HD is corrupted.

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I was able to boot OS 9 from the optical drive, as well as an external firewire drive. same issue, no keyboard, except the mute, brightness and volume keys all work fine.

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    by the way, JPL, thanks for your input so far, it is much appreciated, this powerbook is just really getting on my nerves, so I may not sound appreciative some times, but I really am.

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Clark,

    No problem...

    I think you have covered all the bases, so if you are sure your replacement keyboard is good, I think you are looking at a logic board.

    Sorry this troubleshooting did not solve the problem.