Benches Vintage and obsolete

15

Updating OS on Mac SE

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have recently acquired 2 working Macintosh SEs. One has Macinstosh SE/30 printed on the front, and the other has just Macintosh SE.

They both are in good working condition, however, they are both running System 6.1. Apple's web site states that both systems can be upgraded to System 7, but I need direction on how to do this.

System 7 is downloadable in floppy disk sized chunks, and I have working floppy drives on both SEs and a couple of Windows XP systems. I tried using Transmac, running on an XP system, to read double sided, high density diskettes that I formatted on one of the SEs, but it failed to read the diskette. Perhaps it has something to do with the way the old SEs format the diskette? I checked the diskette to make sure it was good, and it was.

I don't have an ethernet connection in the SEs, nor do I have a dial up account I can use with their modems. So, I am restricted to sneakernet to update these computers. If anyone has some step by step instructions on how to proceed, I would appreciate it.

Thanks,

hbchrist

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh,

    To begin with, concentrate on the SE/30, since this machine is able to handle both the special 800K Mac format and 1.4 MB. An original SE (not FDHD) can only use 800K (DSDD/2DD diskettes).

    So, (re)initialise the HD floppies in the SE/30 (to 1.4 MB Mac format). A PC floppy drive can (with extra software) read from and write to 1.4 MB Mac floppies (but not 800K).

    You can use a PC utility (for example, HFVExplorer) to copy downloaded MacBinary (.bin) files to Mac-formatted 1.4 MB floppies. If the files are transferred as they are (.bin), you will need a decoding utility on the SE/30. However, provided that TransMac works as HFVExplorer does, you should be able to decode the .bin at the same time as the files are copied. You will need
    Disk Copy 4.2 on the SE/30 in order to create sector-copied floppies from disk images.

    It cannot be ruled out that the installed 6.0.x system will prevent you from carrying out various tasks on the SE/30. If so, it is even possible (using a special procedure) to write certain Mac 1.4 MB disk images directly to floppies on a PC.

    If you click on my name, you will find a number of posts dealing with PC-to-Mac transfers. Do not hesitate to post back with additional questions.

    Jan

  2. 0

    Denis Eddy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh

    The superficial similarity between the Macs, the 'SE', is indeed superficial.

    The
    original SE (800kB floppies) has a 68000 processor at 8MHz, and 4MB max. of RAM.

    The
    SE/30 (1.44MB floppies) has a 68030 processor at 16MHz, a 68882 FPU, and the potential for 128MB max. of RAM in 32-bit mode. The SE/30 is the most powerful of the Classic AIO machines. The SE, by contrast, is a tarted-up version of the Plus, with an internal hard drive. A good, honest, yeoman machine, but not in the same paddock as the SE/30.

  3. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    UPDATE

    I was able to get Transmac working on a separate XP workstation. I initialized a double 2DHD floppy in the SE/30 and read it through Transmac. I wrote a test file to the floppy, stuck it back into the SE/30, and was able to open the floppy and read it. So far, so good.

    The "plain old" SE, however, still refuses to read the floppy. I took a closer look at the two systems OSs, and I realized that the SE/30 is running System 7.1, not 6.1 as I believed earlier. The SE, however, is running 6.0XX. From what you all have posted in response, I suspect that it can only read the 800K floppies, which puts a real wrench in my update plans. Not insurmountable, but exponentially more aggravating.

  4. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This is not too difficult. Use TransMac (and a 1.4 MB Mac-formatted floppy) to transfer the eight System 7.0 800K files
    here from the PC to the SE/30's hard disk. Then, transfer the System 7 Tune-Up file
    here. Finally, transfer Disk Copy 4.2
    here.

    If you have been able to decode the .bin internally in TransMac in connection with the transfer, StuffIt Expander will not be needed on the SE/30. Otherwise, drag each .bin file onto the StuffIt Expander program icon.

    You can obtain a StuffIt Expander 4.0.1 installer for Mac through a PC. To do this, download MACDISK.EXE
    here onto a PC. At this point you may have to (temporarily) unload any anti-virus software. Prepare an empty PC-formatted 1.44 MB (HD) diskette via the FORMAT A: command in DOS or the Full formatting option in Windows (this is important, do not just use a ready-formatted floppy). Launch the MACDISK.EXE program on the PC. Follow the instructions on the screen. When ready, immediately eject the floppy (which automatically has been converted to Mac format and contains a StuffIt Expander installer). Move the disk to the SE/30, drag-copy the installer to the hard disk, and install StuffIt Expander.

    In Disk Copy 4.2 (the Make A Copy button) on the SE/30, create sector-copied 800K floppies from the (totally, nine) disk images. You are supposed to use DSDD/2DD diskettes for this (not HD). As a very temporary solution you can cover the extra square hole (the one without a slider) in an HD diskette with a piece of tape, thus "emulating" DSDD/2DD. However, the magnetic properties are not identical, so expect errors.

    It may be a good idea to reformat the hard disk on the (plain) SE via the System 7.0 Disk Tools floppy. Install the full System 7.0 (start from Install 1).

    Jan

  5. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    GAHHH!

    I was following your instructions, Jan, when, right in the middle of initializing another floppy, the SE/30 siezes up with a "finder" error, prompting a reboot. I did. Same problem again. So, I reboot and hold down the shift key to turn of extensions. I am given a "dead Mac" icon with the 0000000F code (plus another which I didn't write down). OK, that's it for the day, but I refuse to be whipped.

    Can the SE/30 boot off of a floppy? If so, I can begin with a reinstallation of the OS I downloaded from your earlier link.

    TIA,

    hbchrist

  6. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh,

    Yes, you can start the SE/30 from a floppy. The error might indicate a problem with the SCSI hard disk drive driver software. Try booting with the four keys Command (Apple) + Option (Alt) + Shift + Delete (Backspace) pressed.

    The SE/30 will accept the System 7.0.1
    here. Please note the difference between System 7.0 on 800K floppies and System 7.0.1. System 7.0.1 is 1.4 MB only (except the System 7 Tune-Up file, which is 800K and can be used for both 7.0 and 7.0.1). Thus, the System 7.0.1 disks cannot be used in a plain SE.

    If absolutely necessary, it is possible to create 1.4 MB sector-copied System 7.0.1 floppy disks (but never 800K 7.0) directly on a PC, using the same special technique (with a PC disk-image utility) as for a Network Access disk.

    A Performa 6290CD is mentioned in your profile (black screen? - check whether the internal battery is OK). This machine could be used (with Disk Copy 4.2) to produce floppies from both 800K and 1.4 MB disk images.

    The Disk Copy 4.2 application (the Make A Copy button) is essential in order to get proper 7.0 or 7.0.1 system disks. Do not expect a floppy with a file drag-copied onto it to be bootable.

    Jan

  7. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I generated the profile from one of my first questions on the support site (and I just updated it). That particular issue on that Mac is not resolved, but I did need an internal battery. I came into two 6200CD series systems at the same time, and one did boot but it kept displaying the date as 1956. I replaced that battery and the problem went away.

    The 6290 with the "black screen" actually starts, but the screen always gives an "out of frequency" error. I've replaced the internal battery and the video card (both of which I know are working) but to no avail.

    I've set aside the unusable 6290CD for now because the 6200CD works just fine. I also have a Quadra I can use for this operation, plus a G3. I'm just in virgin territory with a Mac this old, but the system and its issues intrigue me, so, thus, the endless questions.

    Thanks for all your help.

  8. 0

    AppleIIFreak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh

    As you have got a working 6200CD, you don't need to use Transmac. Transfer the downloaded files unchanged to the MAC,use Stuffit/Disk Copy there to make your floppies for the

    Se/30. you can also make 800k -disks on that MAC-using one-hole-Disks(The MAC 800k format).If you can burn CD on the PC(slow,ISO 9660),you can transport all the files you need to the 6200CD-and work on there!

    Good luck

  9. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You threw me off a bit. The 6290CD works, but you're saying that it can read Mac files on a DOS formatted diskette (or from a writeable CD)? The 6290 does not have ethernet (yet), so I can't download directly to it (I only have broadband, no dial up, so I can't use its modem, either).

    The 6290CD is running System 9.

  10. 0

    AppleIIFreak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I did this,both with disks and CD on a 7600/132 with OS 9.1 From system 7 up there is PC Exchange to automatically read PC-formatted disks. Same with a Cd made on a PC(Data disk)-you can copy all files from there to the MAC.

    Give it a try-good luck

  11. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This just gets better all the time. Using AppleIIFreak's suggestion, I copied the System 7 and 7.1 files to CD then unloaded them to the 6290CD that I have.

    I was moving files from the 6290CD to the SE/30 via floppy, but I decided to try to boot from a floppy. Using the Disk Tools diskette for 7.1, I booted with the diskette in the drive. It kicked the diskette out and booted regularly. Minutes later, I got a F error and was forced to hard restart.

    Now, all I get is the Mac icon with the flashing question mark. I've powered the system off with the Disk Tools floppy in, but it keeps spitting out the diskette. I can't seem to get it to boot on a floppy, no matter what combo of keys I hold down. I've tried flashing the PRAM and using Jan's combo above, but to no avail.

    If I can't boot to the hard drive, why won't the SE/30 boot off of the floppy? Is it because I used double sided, high density disks? Do I have to get some 800K disks? Do I now have to revert to a System 6 boot diskette?

    Ugh, it seems the more I work on this machine, the more it deteriorates. A flashing question mark in a diskette icon is not regarded as a terminal issue, so I'm willing to soldier on.

    Thanks,

    Hugh

  12. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh,

    Using the Disk Tools diskette for 7.1, I booted with the diskette in the drive. It kicked the diskette out and booted regularly.

    I assume that you mean the British System 7.0.1 Disk Tools (
    here). Did you use Disk Copy 4.2 (the Make A Copy button) on the Performa 6290CD to create a sector-copied (bootable) floppy?

    If I can't boot to the hard drive, why won't the SE/30 boot off of the floppy?

    First of all, as I have mentioned earlier, it is absolutely essential that the boot floppy has been created from the disk image via Disk Copy (4.2). Secondly, bad SCSI drivers may obstruct the startup operation even when trying to boot from the floppy. This is the reason for the Command (Apple) + Option (Alt) + Shift + Delete (Backspace) combination. Try it again; check that the correct keys have been pressed.

    Is it because I used double sided, high density disks? Do I have to get some 800K disks?

    You can use both 1.4 MB (HD) and 800K (DD) diskettes in the SE/30. 800K disks are required for the plain SE.

    Do I now have to revert to a System 6 boot diskette?

    No, System 7.0.1 should be fine for the SE/30.

    Jan

  13. 0

    Denis Eddy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh

    The significance of Quizzical Floppy is that the system cannot find a blest System Folder on a mounted volume. In the case of a removable drive, it will spit the volume out. If the floppy were of an unsupported kind (eg, 1.44MB in an 800kB drive), it is more likely that you would get the 'I don't wish to know about this volume' floppy-icon-with-an-X in place of the question-mark.

    Spitting out a floppy containing a supposedly supported System is the behaviour to be expected if there is an Enabler needed (as became the case when 7.1 was released), but not present.

    'Can't find' a blest System Folder includes the possibilities that there isn't one on any bootable drive, or that the system has temporarily lost sight of that drive to which PRAM points. This is all the more probable if you were obliged to recover brutally from a Sad Mac. It is usually fixed with a PRAM reset to reconcentrate the Mac's attention in the necessary direction.

    If you wish to boot from a floppy instead of an internal hard drive, it is usually easier to achieve if you insert the floppy immediately after the startup chime. As you have found, an already-present floppy in the drive is usually spat out, whether it is bootable or not. If, after insertion after the chime, the floppy is spat out again, you can conclude that the Mac is convinced that the floppy Will Not Do.

  14. 0

    Hugh Christian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First all, thanks Jan for all your help. It has been an enormous boon in getting through this issue. I picked up this morning where I left off from yesterday's post.

    This morning, the Mac
    did take the bootable floppy I had created (using Diskcopy 4.2). Upon boot, it informed me that the hard disk had issues and that I should initialize it. I accepted the recommendation and initialization commenced. A few minutes into it, the screen went completely fuzzy, and the Mac became unresponsive.

    I hard booted and the system came up using the floppy boot. The hard disk icon showed, but I opened it to discover no system folder. So I copied the folder from the boot floppy to the hard disk. As the copy process was finishing, I got an F "-finder" error code, and the system froze. I had to hard boot again, and now the system does any one of the following upon reboot:

    - boots off the floppy, then gives me a finder error

    - boots off the floppy, then the screen goes black

    - does not boot off the floppy or the hard disk, but gives the sad Mac and the "000000F" and "00000001" error codes, which indicates a potential hardware error (using the info I got from http://www.appleerrorcodes.com).

    Booting with the Command (Apple) + Option (Alt) + Shift + Delete (Backspace) combination doesn't change anything, nor just holding the shift key when I boot. This looks, to me, like a hardware issue. If so, maybe it was just this Mac's time to fail.

  15. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hugh,

    To begin with we can assume that the startup floppy (Disk Tools) is OK, and that the formatting utility (Apple HD SC Setup) is able to detect and (under normal circumstances) initialise the hard disk.

    It is still possible that bad SCSI driver software affects matters (and there could of course be an issue with the hard drive itself). However, at this point one would be interested to take a closer look at some other things as well. The internal battery (on the logic board) may be weak. It may not be a bad idea to remove and reseat the memory modules (RAM and ROM). Also, it may be worth checking the hard drive and floppy drive connectors. If there is a network (or another) card installed, one may want to test the computer without it. Finally, according to Larry Pina's book Mac Classic & SE Repair and Upgrade Secrets (ISBN 1-56609-022-9), an error code 0000000F/0000000D can be related to a filter failure.

    Please note that it can be very dangerous to work inside a compact Mac. High-voltage charges will have to be expected in various circuits, even when the Mac has been turned off and disconnected from the mains. Anyone who is not absolutely certain about what to do must refrain from opening the case. This is work for experts.

    Jan