Benches Uncategorized

2

my airport and base station are in need o…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I need to replace my 2 routers. Does anyone have suggestions. 2 level home high speed ISP. Do I want to look at Mesh systems or specific brands. I have been pleased with my airport systems.

2 replies

Sign in or join Beachball Help to reply.

  1. 0

    LaPastenague

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    High end mesh can work very well.. especially if you have ethernet between the floors and the Satellites support it. eg Netgear Orbi.. Plain mesh is good to fill house with wifi.. you just keep adding satellites until you have the coverage you need.. but the more hops the wireless goes through the slower it will be.

    The standout system for Apple users is Synology. RT2600AC and they sell a cheaper mesh unit now to go with it. So this supports both wireless mesh and wired AP system. Unlike the Netgear you don't need to have a cloud account to configure your system.. which is unacceptable to me.

    Total cost is not cheap.. but it offers Time Machine to a USB drive which works well.. unlike most routers that either don't support anything but PC systems or have Time Machine extensions that are unreliable.

    I used Asus high end for a long while but recently ran into trouble with them. It has excellent firmware and a great layout with lots of functionality. Sadly my new ISP fibre connection did not work as well as it should.. and this is a problem with any system you buy.. there is never a one size fits all that is perfect for everyone.

    The rather more complicated and expensive way to go is ubiquiti. They sell several different sorts of routers and wireless access points (UAP series) to go with them.. the cheap end are excellent value for money but fairly complicated to do more than simple setups. The more expensive USG system.. offers a single point controller much like the airport utility.. with a rather lot more info.. but you really need to be comfortable with learning networks..

    Here is a fairly good description blogging the changeover.

    https://www.douglasisaksson.com/lessons-learned-from-deploying-a-unifi-network-at-home/

    I have a few more of these as I think it is very helpful to see the issues involved.

  2. 0

    Dunc_F

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks so much. Now I need to re-look at my layout and decide. :-)

    Dunc