Benches / Uncategorized
▲ 7 ▼
MGXU Interface problems apple Verified · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am attempted to bring two microphone inputs into Logic Pro X using a Yamaha MGXU interface. However, no matter how I set up the tracks, both tracks receive input from both mics.
Any help would be appreciated. Thanks.
7 replies Sign in or join Beachball Help to reply.
▲ 0 ▼
Radarhus · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
How exactly are you setting up the tracks? Could you provide a screenshot of Logic's Mixer with these tracks' input slots visible?
I suspect you created a stereo track and the inputs where you plugged in the microphones are the two sides of the same stereo-pair.
▲ 0 ▼
tiresias240 · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
Not sure, this is my first time using the program.
▲ 0 ▼
Radarhus · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you switched off the stereo mode on the Yamaha console?
▲ 0 ▼
tiresias240 · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
Don't have that button, I'm on the MG10XU. After playing with it a few minutes it has both mics coming in on both input 1 and input 2.
▲ 0 ▼
tiresias240 · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
So here's the response from Yamaha customer service. There's $200 down the drain.
▲ 0 ▼
Pancenter · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
All you need to do is create two MONO audio tracks and set the Input on one channel strip to L and on the second Audio track set the Input to R.
▲ 0 ▼
Radarhus · 3 years ago
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, thanks for casually mentioning that crucial detail about your Yamaha device. Do as Pancenter says above. Cheers!