Benches Uncategorized

8

Overexposed Video - Can This Be Corrected in FCP

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have some video of a wedding. The camera operator exposed the video for a VERY dark skinned priest, however, the light skinned couple is washed out, and the bride's dress and the walls of the church are beyond broadcast safe.

What I would like to do is reduce the white levels but not change the mid and dark tones.

I have gone through the Color Correction and Image Control filters, and the best I get when I try to reduce brilliance, is a gray/muted image.

The second camera on the couple is better exposed and cutting between the two is "Jolting" to say the least.

Is there a filter or technique that I can use to better match the exposure of the two video tracks? Can this even be handled in FCP, is this problem better suited for Color (which I have NO experience in)?

Any help or suggestions would be greatly appreciated.

Thanks.

8 replies

Sign in or join Beachball Help to reply.

  1. 0

    Michael Grenadier

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Have you tried the 3way color corrector? You can limit a correction by luma, saturation, hue, etc. But don't get your hopes up too high. DV tends to loose all detail when its overexposed.

  2. 0

    David Harbsmeier

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The "Captain's Blowout Fiixer" filter might help, but as Michael already warned, don't expect miracles. It may help to layer the clip above itself, then mask out the area surrounding the couple, then apply the filter to the upper clip.

    Scroll down to the "Captain's Blowout Fixer" filter on this page:
    http://pistolerapost.com/pluginz/

    -DH

  3. 0

    Gary Sumlak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Already tried the 3-way cc, and just using the graphical interface (which, to this point is all I every worked with), it just made the image look gray and dull. HOWEVER, when I switched to the Filters tab, I
    discovered the "Limit on Luma" section, an making some adjustment there made a
    dramatic difference on how the Highlight Controls Level worked. Not perfect, but a definite improvement.

    I did Export to Color, and when color opens up, the interface is almost impossible to read... on my 19" 4x3 monitor @ 1280x1024, the text is broken and blurred - zooming in on the text makes it intelligible, but having to zoom in order to read a label is ridicules. Is there a way to adjust the resolution in Color so the interface is readable?

    I managed to find the "Primary Out" room, and adjusting the curve to the Luma channel gave me exactly what I want - not perfect, but significantly better than the results from 3-way cc. Now I have to figure out how to copy those setting to subsequent clips and save it back to FCP.

    I realize this is not the Color forum, but would you know how to copy the Luma to subsequent clips and save it back to FCP?

    Thanks.

  4. 0

    Zebulun

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I would submit that if you've not become even remotely familiar with HSL qualifying in the 3Way, that Color really isn't for you yet.

    No, Color's interface is not flexible and it demands a minimum resolution.

    Over exposed video of any sort is almost impossible to fix. The green channel carries most of the luma info in the video signal so it's possible that there might be some detail left in green and you can copy that information to the red and blue channels. This is what the Blowout Fixer is doing.

  5. 0

    Gary Sumlak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks.

    I installed the plugin and reviewed the tutorial clip and it look it has potential.

  6. 0

    Gary Sumlak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the help. I eventually went with the 3way CC and limiting on luma, bumping "up" the blacks and color sat, and the end result was closer to the other camera, enough so that it was acceptable (a little grainy), but not jarring.

  7. 0

    David M Brewer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    In Color's secondary room you might be able to isolate the problem are in the video. Doing so you only correct those areas and not the rest of the frame.

    Here's two tutriols on youTube on how isolate an area in the secondary room:

    http://www.youtube.com/watch?v=1wBzKeS3NS4

    PART 1

    http://www.youtube.com/watch?v=LwMUkuTf33g&feature=related

    PART 2

    http://www.youtube.com/watch?v=YyHFUKTAoeE&feature=related

    I've used the secondary for under exposed parts of a videos. Especial for green screen work. Where the green screen isn't bight enough or there's green spill on the subject.

  8. 0

    Gary Sumlak

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, David for the links. The videos will do a lot to help me get a basic understanding of color.

    Greatly appreciated!!