Imported from the Apple Support Forums via the Wayback Machine 🔗
hey. sort of new to this forum.
i just won a B&W G3 400mhz on ebay [wahoo!] and was wondering if there was a decent economical [OMG!]processor upgrade recommendation. as a background reference, i am not new to macs. the last mac machine i ran was my 7500 powermac.....about 8 years ago or so, that i had upgraded to a sonnet G3 400. as i recall, the upgrade was pretty spendy.
i don't expect the speed of multi-GHZ modern machines.....or i would have bought one of them. i just want competent performance and a usable OS to work with. the B&W already is supposed to have OS 10.4, the PCI ATA hard drive upgrade, video, USB 2 and 3/4 of a gig of RAM. thanks....
Imported from the Apple Support Forums via the Wayback Machine 🔗
The least expensive option is a 400 MHz G4 ZIF processor, taken from a PCI Graphics G4. After running a firmware update to enable the use of a G4 processor in your B&W G3, the rest is plug-and-play. Subsequent G4 models used a different processor form factor, so anything faster than the 400 MHz mentioned would be a third-party product. Depending on your budget, you could probably find something at eBay that's reasonably priced.
0
rtabish·
Imported from the Apple Support Forums via the Wayback Machine 🔗
so, with the G4 upgrade, would i also upgrade the OS, or would that pretty much be unnecessary? i found OS 9.1 to be pretty useful at the time i was using my powermac. OS X was just coming out when i stopped using macs, and i never got the chance to use any of the X versions.
this is probably a matter of personal choice, but is there a particular online seller i should check out. i did some business with Otherworld computing, and still get their catalog.
0
Dave Hamilton·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"would i also upgrade the OS, or would that pretty much be unnecessary?"
You won't need to upgrade the OS, but you will need to patch the firmware before installing a G4 chip, as Jeff mentioned.
G4 upgrades up to 650MHz can use the B&W's full system bus speed.
700MHz and higher G4 upgrades use a later version of G4 chip, which requires slowing the B&W's bus speed down to 66MHz (from the original 100Mhz) because of a hardware issue with the B&W's memory controller.
G3 upgrades of all speeds can use the B&W's full bus speed.
0
rtabish·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thanks guys. very helpful info saving me a lot of time! i paid $50 for this G3, and i still have a bunch of stuff i can use on it, including some pc100 ram. if i can find a bit faster processor, i may have a bit of fun relearning all this mac stuff over again.
will i be able to upgrade the optical drive to DVD, or would that be worth the trouble? my main interest is in photography, but digital video might be fun too.
0
Dave Hamilton·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"will i be able to upgrade the optical drive to DVD, or would that be worth the trouble?"
You can install a DVD burner, but the burn speed for DVDs will be limited to under 12x, because of the low speed of the optical bus.
Also, B&Ws are picky about booting from optical drives.
Pioneer drives usually work well, and can be had for around $30 online.
This page has Mac user reviews of different drives.