Benches Uncategorized

1

Unplugging the peripheral device...

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I constantly going back and forth from a PC to a Mac, the hardest thing for me to get used to is when I'm done with a peripheral device. With the PC you simply unplug but with a Mac you have to eject the device. I can't tell you how many times I got that stern warning after I unplugged the device from my Mac.

I got two questions: Mac is known for its simplicity and efficiency, how come they put in this extra and annoying maneuver? And, have I done any harm to my Mac with so many unplugs?

1 reply

Sign in or join Beachball Help to reply.

  1. 0

    JoeyR

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This is typically related only drives (flash, external hard drives, etc.) not all peripherals. The reason for this is that OS X using different caching techniques to improve the performance of these devices. In order to make sure that everything has been properly saved to the drive, it is recommended that you properly eject the drive. Interestingly enough, Windows employs the same techniques but does not usually enable them for external drives by default. The result is slightly slower performance on external drives under Windows. Although, with Windows, even if they are enabled, Windows will not give you the warning if you just pull the device.

    You will not harm your Mac if you do not properly eject the device. You "may" corrupt data on the external drive if everything has not been saved. In the years I have been using Macs, I've never had this happen however. It's more of a safety precaution just to be sure. If you wait a few seconds after you have written to the drive, you'll almost always be fine. It is better though to properly eject the drives. You may sometimes encounter problems remounting a drive that has been improperly removed as well.