80 gb Ipod, SMART DATA error
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My Ipod is absolutely dead. I was wondering if there is any way I could get it working, here is the problem.
1. It does not work with Itunes, yes I have restored it, yes I have tried another computer, yes I charged it all the way, yes I drained it all the way, yes I have done almost everything in the world to it.
2. I cannot format it in Windows because " the disk is not able to be formatted ". I was going to format FAT32, then restore.
3. I was running diagnostics, and under Hard Drive -> HDSMARTData it said I have an error.
My ipod makes skipping noises once in a while, and I was wondering if this is physical damage or not.
System Config Results :
8K739NJ2Y5N
2568A4F
82021685
130000
SB
1.0
BX7923P26002
MB029
00020001
00020001
----
It is formatted for windows..at some point.
Also, when I tried restoring it, sometimes I can get A song to work, other times not. When I restore it, sometimes the menu is invisible, and sometimes it works fine. It is also sometimes not erasing my library, then other times it comes back, but i never resync.
Please Help Me.
Oh, and my warranty is expired, so I dont mind using this as a guinea pig.
15 replies
Sign in or join Beachball Help to reply.
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What figures do you have for the HDDSmartData? Here is a recent thread -
http://discussions.apple.com/thread.jspa?messageID=8197320� - in similar vein. When you say you can't format have you tried removing all other USB components, then power cycling. This should remove potential driver clashes & give you a better chance of a reformat.tt2
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have tried on numerous computers, without any additional usb than necessary.
Although, I do not know what "power cycling" is. I am going to look that up, thank your for helping.
I will look that up, and try in a few, I will edit this post if I try it again.
---I looked up power cycling, yes I have rebooted my computer + ipod in various situations and stages, ADDED NOTE: I got an error when I tried to restore, I had to reinstate my drivers, I am trying to restore again ---
* Smart Data
*[Device Opening...]
( wait 3 secs )
[Device Opened]
Error
MENU to Close
*HDD SPEC
*SNO : 87M5WK6PW
FW Revision: VQ110A
LBAs : 0x950f8b0-Added Data-
Message was edited by: Skoaleosis
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, I see what you mean - so it just displays the message "Error" instead of giving you the HDDSmsrtData information like this:
Retracts: 448
Reallocs: 5
Pending sectors: 0
PowerOn Hours: 1415
Start/Stops: 614
Temp: Current 2C
Temp: Min 10C
Temp: Max 50CNot a promising situation. By "power cycling" I meant actualy turning the computer off, pausing, then turning on again. Sometimes a simple reboot preserves existing hardware configuration data when you want it reconfigured. When you try to format the drive exactly what error message do you recieve? Can you put the iPod in Disk Mode? If so connect it the PC, browse *My Computer* and right-click on the drive for the iPod, click
Properties, then click
Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors*. Once the scan/repair has completed you
should be able to reformat & restore.tt2
BTW use [ and ] for square brackets otherwise the forum thinks it's a URL.
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have done every form of reboot, reboot, rebooting then waiting a second, manual shutdown, of both Ipod and Computer.
I have tried to use the disk recovery software on windows, and it did not work ( yes it was in disk mode ). All it did was blink for a second, like it ran the program at light speed. It does this for all configurations of checks and no checks.
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Connect the iPod to the PC, click *Start... Run*. Type in
CMD & press enter. In the command window type in *CHKDSK X: /R* where X is the drive letter for your iPod. What results do you get?tt2
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK - so Windows is seeing an unformatted drive. What happens if you open a command Window and type in *Format X: /FS:FAT32* where X is the drive letter of the iPod? If that can't cope because there is no partition info try *Start.. Run... DISKMGMT.MSC* and see if the disk managment system will let you partition & format the drive.
tt2
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, first it said to put a new disc in, then hit enter. I hit enter, then it said
"type of system is RAW
New file system is FAT32
Verifying 72162M ( the size? )
The volume is too big for FAT32"I am going to try the other thing now.
** On Disk Management it said I had a healthy disk with 100% free space, which I think is impossible do to the fact it has Apple Stuff on it. But may be it's set up weird? I can only format it to NTFS**
Message was edited by: Skoaleosis
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well - we're getting somewhere... slowly. Apparently, in a bid to drive users to NTFS, Microsoft have limited the ability of their own tools to create FAT32 paritions larger than 32Gb even though FAT32 can support up to 2Tb.
See:
http://support.microsoft.com/default.aspx?scid=kb;en-us;184006I've tracked down a 3rd party tool that could probably do the job here:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htmRecalling the advice on
Erase your iPod - The Super Fix for most iPod Problems however, it may be enough to simply wipe what is there & then get iTunes to the rest. If you format to NTFS I suspect iTunes can erase the partiton & create the large FAT32 partiton it needs under Windows if you restore. Alternatively find a friendly Mac owner and you can format the iPod in FAT32 on that as it doesn't have the Microsoft limits.tt2
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
NOTE: My Computer also says I have an Iphone hooked up when I don't
1, Format NFTS then Run Itunes Restore - Failed ( disk is not able to be formatted )
2. fat32format.zip - failed ( fat32format only supports ipods with 512 bytes per sector )I do not have access to a mac, easily, so do you think there is something I can run on a Linux Live Cd that could fix this?
Message was edited by: Skoaleosis
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What happens if you use disk manangment to delete the partition & then try using iTunes to restore? It's a long time since I played (briefly) with Linux, but it can probably format in FAT32 > 32gb. The iPod should be using a cluster size of 16kb.
tt2
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Does disk management still report the drive as empty/raw? Will it create an emtpy unformatted basic partiton? Back in the day I would probably have tried FDISK /FIXMBR to tidy up the partition table which is probably corrupt, but FDISK is not supplied with XP.
tt2
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Windows Explorer says I have 0mb of used and 0mb of free space.
Location : 0 ( Ipod )
The device is working properly.Driver Date : 8/22/08
Disk management says I have a 74.34 Healthy ( Active ) Drive that has one big RAW partition that I can't delete.
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
INTERESTING DEVELOPMENT!!
Somehow, my Ipod started working on its own, I think it's because of fiddling with it yesterday. It is no longer in "recovery" mode, it is now just "corrupted". However, when I attempt to restore I get ( 1439 )-The one that needs to have the drivers resigned -. The Ipod allowed me to select a language, and the menu works fine. When I ejected, the Ipod had a black screen, with a loading bar and the apple logo, then reset itself. This is a very good development.
Any idea to carry from here?
I couldn't restore, or format even in this stage. Every attempt at restoring seems to work, I get the default Ipod games, which crash when used, causing the Ipod to restart and have me choose a language again ( the language between french and italian is missing ). The ipod says it has 0kb free, but the bar is not full. Would formatting with a Mac help, or is this thing toast?
- 0
turingtest2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Can you now run chkdsk? Does HDD SmartData still just give an error? When you restore are you letting it try to copy all your data back? If so I would suggest making a small test playlist of say 20 songs and choosing to sync with those only until you can find out if it is behaving properly.
tt2
- 0
Skoaleosis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Smart Data
Retracts: 1296
Reallocs: 4752
Pending Sectors: 56
PowerOn Hours: 154
Start/Stops: 6071
Temp: Current 26c
Temp: Min 3c
Temp: Max 52c---
I cannot restore, and it says I have to restore for it to sync. I think I should downgrade my firmware, because it is messed up on my Ipod.
I dont know though.
Chkdsk says its RAW, and it doesn't support RAW.
The games crash, and it doesn't work with Itunes.