How to increase the Bass and Treble of a …
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi there,
1. Anyone knows how to increase the bass and treble of a track ?
2. Within the same track, if I do a split into 3 sections, can I adjust & have say 3 different level of reverb, ie one in each section ?
Thanks
9 replies
Sign in or join Beachball Help to reply.
- 0
Christoph Drösser ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
1. Go to the track info, every track has an equalizer slot that lets you selectively boost or lower frequencies (much finer than just "bass" and "treble").
2. Use an effects curve on the track to selectively set the reverb levels. You don't even have to split a region to do that.
- 0
RyanManUtd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Christoph Drösser wrote:
1. Go to the track info, every track has an equalizer slot that lets you selectively boost or lower frequencies (much finer than just "bass" and "treble").Thanks Chris,
I went to the track info by clicking on the "i", then I went to VOCALS (since I am recording vocals) but I cannot find the Treble & Bass settings. Do you think you can show me the steps ?
Thanks
2. Use an effects curve on the track to selectively set the reverb levels. You don't even have to split a region to do that.
I went to the curve but there are only curves for Track Volume & Track Pan. So, I click "Add Automation ...." and a series of box came out for me to tick, I list them here:
1. VISUAL EQ
i) Bass frequency
ii) Bass Gain
iii) Low Mid Frequency
iv) Low Mid Gain
v) High Mid Frequency
vi) High Mid Gain
vii) Treble Frequency
viii) Treble Gain2. Echo & Reverb
i) Echo
ii) ReverbHow do I know which of the setting above is for adjusting treble and which one is for adjusting bass ?
Thanks
- 0
Christoph Drösser ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I went to the track info by clicking on the "i", then I went to VOCALS (since I am recording vocals) but I cannot find the Treble & Bass settings. Do you think you can show me the steps ?
After picking a preset (like "Male Basic"), click the "Edit" tab, and you will see a couple of effects slots. One of them is "Visual EQ", and you can set several parameters for filtering (as I said, it's not just "treble" and "bass"). If that seems too complicated, click one of the empty slots and add the Graphic EQ - that looks more like usual controls on a stereo, just with more bands than just two.
How do I know which of the setting above is for adjusting treble and which one is for adjusting bass ?
That was my answer for question 2 - you wanted to change the reverb over the course of your track, so select "Reverb". (You can also automate the filters by choosing "VisusalEQ" and for example the "Bass gain" and "Treble gain" - but I thought you wanted to set the sound parameters for the whole track, not automate them.)
- 0
RyanManUtd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
{quote:title=Christoph Drösser wrote:}
After picking a preset (like "Male Basic"), click the "Edit" tab, and you will see a couple of effects slots. One of them is "Visual EQ", and you can set several parameters for filtering (as I said, it's not just "treble" and "bass").Ok, I can follow up to here, I change to manual & there is a list of options, is there a sample video/audio to show us what these effect does to the audio ?
If that seems too complicated, click one of the empty slots and add the Graphic EQ - that looks more like usual controls on a stereo, just with more bands than just two.
I cannot follow this. When you say "empty slots", are you referring to a new empty track ? How to add Graphic EQ ? I cannot even find the word "Graphic EQ" !. Pls help.
Thks
That was my answer for question 2 - you wanted to change the reverb over the course of your track, so select "Reverb". (You can also automate the filters by choosing "VisusalEQ" and for example the "Bass gain" and "Treble gain" - but I thought you wanted to set the sound parameters for the whole track, not automate them.)
I need help on this "curve" thing.
I place the CTI somewhere in the middle and click PLAY. As it plays, the CTI moves to the right ... then as it plays, I click on the REVERB & push the horizontal line upwards (ie increase the reverb of the whole track upwards) but I cannot hear any difference in the sound whatsover !!
Then i place the CTI back to the beginning then I can hear the difference. How come the reverb effect is not instant ?
Thanks
- 0
Christoph Drösser ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I cannot follow this. When you say "empty slots", are you referring to a new empty track ? How to add Graphic EQ ? I cannot even find the word "Graphic EQ" !. Pls help.
Did you click on the "Edit" tab? Then you should have several effects that you can edit: Compressor, VisualEQ, Echo and Reverb are standard. If you click on one of the empty fields, a menu for additional effects comes up, among them "AUGraphicEQ".
I need help on this "curve" thing.
It's not something you apply while you play back or record, but you have to draw the curve. Search the Help menu for "curve", it will give you a good introduction.
- 0
RyanManUtd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
{quote:title=Christoph Drösser wrote:}
Did you click on the "Edit" tab? Then you should have several effects that you can edit: Compressor, VisualEQ, Echo and Reverb are standard. If you click on one of the empty fields, a menu for additional effects comes up, among them "AUGraphicEQ".
Okay, the keyword is to "click on the empty field". And yes I found the AUGraphicEQ. When I click on the icon, a 31 vertical sliders appear. How to use this ? Isn't there a simple knob like my mini-compo where I have two knobs, one to rotate to adjust the bass, and the other knob to rotate to adjust the treble ?
It's not something you apply while you play back or record, but you have to draw the curve. Search the Help menu for "curve", it will give you a good introduction.
I have read the curve thing & I think I know how to draw the curve (although I wish drawing the curve would be more responsive like those in Final Cut).
My question is how come I cannot hear the difference in the sound IMMEDIATELY upon applying (ie increasing or pushing the curve up) ? What do I have to do to hear the difference ?
You see, as I playback the sound, the CTI moves to the right, & I push the curve up (ie only one point, which is basically a horizontal line being push up). Theoritical speaking, say upon pushing up the volume curve horizontal line, as the CT moves, it should play at a louder sound, shouldn't it ? But I hear no difference in loudness.
It is only after I press stop, go back to the beginning & playback, then only will I hear a louder sound. Is this a bug ? Or is it me alone having this problem ?
Thanks
- 0
Christoph Drösser ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
And yes I found the AUGraphicEQ. When I click on the icon, a 31 vertical sliders appear. How to use this ?
I thought this was an easy-to-grasp concept. Imagine the frequency range from left (bass) to right (treble). Infinitely many frequencies. With your bass/treble control, you raise all the low/high frequencies, you can't even decide where bass ends and treble begins. So that might be a concept for playing music on a car stereo, but certainly not for mixing and mastering multi-track recordings. With a graphic EQ, you can create your own "curve" of which frequencies you push up or down. So if you want to have more bass, use the sliders on the left, for treble the ones on the right. And use your ears to find out what happens if you only manipulate certain bands. By the way, there's also a 10-band version if 31 is too challenging.
My question is how come I cannot hear the difference in the sound IMMEDIATELY upon applying (ie increasing or pushing the curve up) ?
On my computer it works, but only after you release the mouse button after you pushed some dot around. Slow computers might be a bit unresponsive.
- 0
RyanManUtd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
{quote:title=Christoph Drösser wrote:}
I thought this was an easy-to-grasp concept. Imagine the frequency range from left (bass) to right (treble). Infinitely many frequencies. With your bass/treble control, you raise all the low/high frequencies, you can't even decide where bass ends and treble begins. So that might be a concept for playing music on a car stereo, but certainly not for mixing and mastering multi-track recordings. With a graphic EQ, you can create your own "curve" of which frequencies you push up or down. So if you want to have more bass, use the sliders on the left, for treble the ones on the right. And use your ears to find out what happens if you only manipulate certain bands. By the way, there's also a 10-band version if 31 is too challenging.
Yes, I tried using the easier 10 band equalizer.
I think I understand the part that you said that the left side is the Bass while the right side is treble.
What I have difficulty in is which one to slide, say if I want to increase the Bass, how do I know whether to slide slider number 1, 2 3 or 4 (from the left) ?
I just finished doing a recording of my friend singing, i know something is not that right, but how do I know whether the voice don't have enough bass or treble ? (For music, I can but for vocal it is kinda difficult)
Thanks
- 0
qb ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
+I just finished doing a recording of my friend singing, i know something is not that right, but how do I know whether the voice don't have enough bass or treble ? (For music, I can but for vocal it is kinda difficult)+
There are as many answers as there are recordings 🙂
How would you describe the way it sounds now? Use words like: "sounds like a telephone" or "sounds muffled like speaking thru a pillow" or "sounds like a recording of a seminar in a large room on a video tape". How would you describe it?