Benches Uncategorized

5

repairing headphones

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

hi,

i am using the Lanyard headphones.

my headphone's left channel was dead so i opened up the lead end (the one which goes to the ipod) of the headphone and found a misplaced green wire. the wire seems to be a bundle of thin, laminated filaments and silk. Please see the image:

http://www.4shared.com/file/193014786/7b...

The wire should be at the encircled area (according to me). But it doesnt seem that it was soldered there. Rather it looks like it was pressed and held there by the string. So my questions:

1) Should it be soldered over there(i mean can the wire be soldered)

2) exactly what part of the wire is a conductor? i tried brushing and pressing it against the lead but i wasn't able to get any sound.

thank

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    tartarsauce

    Imported from the Apple Support Forums via the Wayback Machine 🔗

  2. 0

    Mitch 751

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Even I tried to enlarge the picture, it is still no clear to me. But there should be in fact 4 wires :-

    Red (Right +)

    Red (Right -)

    Green (Left +)

    Green (Left -)

    And both ➖ wires are connected with each other, therefore, you have 3 wires need to be soldered to the plug.

    You just need to solder the mental part of the wire.

  3. 0

    tartarsauce

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes you're right. there are actually 4 wires coming from the lead. the '-' wires for both channels seem to be shorted and are soldered in place. The right+ (red wire) is also soldered and is in place. Only the green wire is free which i suppose is the left+ wire. The main problem is that i dont know what part of the wire is a conductor. It's not like an ordinary wire with an outer insulating jacket and inner conductor. I have never opened any headphone before, so it's more confusing.

    Another doubt i have is that the wire doesn't seem to be like it was soldered. There are no loose metal pieces or markings. I feel that the wire was just pressed in place by the string.

    here are some more images:

    http://www.4shared.com/file/193984314/691473ba/SAM_0954.html

    http://www.4shared.com/file/193984728/4c86c48e/SAM_0957.html

    Thank you.

  4. 0

    Mitch 751

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You need an electric tester to prove where the wire to be soldered with the plug

  5. 0

    tartarsauce

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I got it now, the wires are coated and the coating burns off while soldering. Haven't tried it yet but will post as soon as i do it.!