Benches Uncategorized

14

PowerMac G% Quad is having kernel panics

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi All;

Recently my PowerMac G5 Quad has started to kernel panic on me. It has also been giving the spinning beachball a lot. So far I have not been able to see any kind pattern to which application might be causing this. So I am suspecting a RAM problem. The day before yesterday I removed all six of my memory cards and used my canned air to blow out the slots and then reseat all of the memory.

After doing that my Quad was running like its old self once more so I thought I had fixed it. That is until, a couple of minutes ago when it froze while I was working on an email. Then the dreaded dark screen of the kernel panic descended.

Any insight as to what might be wrong with my Mac would be greatly appreciated.

Thanks.

Interval Since Last Panic Report: 16769 sec
Panics Since Last Report: 1
Anonymous UUID: 1C3B7FE8-97D3-4F57-9ACF-ABB957328D68

Sun Jul 4 14:38:48 2010

Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000002 PC=0x000000000001BAB0
Latest crash info for cpu 0:
Exception state (sv=0x655b9a00)
PC=0x0001BAB0; MSR=0x00001030; DAR=0x00000002; DSISR=0x40000000; LR=0x0001F060; R1=0x5B0DF590; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0001EFFC 0x00020414 0x0002BF48 0x0002C110 0x0001E024 0x0002C2FC
0x0004E874 0x00368A78 0x00361970 0x00AE7684 0x00B2970C 0x00B2DA18 0x00AF11A8 0x00AF2384
0x00AF7BE4 0x00B2831C 0x00AD4F54 0x0037BFA0 0x00381A08 0x00381B58 0x00090654 0x0002C100
0x00024B58 0x000B45CC 0xD774EEF0
backtrace terminated - frame not mapped or invalid: 0xBFFFE8A0

Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForcePPC(5.4.8)@0xab7000->0xb52fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x81e000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x61c000
dependency: com.apple.NVDAResmanPPC(5.4.8)@0x836000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x7f8000
Proceeding back via exception chain:
Exception state (sv=0x655b9a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x65622000)
PC=0x977861D8; MSR=0x0200F030; DAR=0x14DA9000; DSISR=0x42000000; LR=0x9778D100; R1=0xBFFFE8A0; XCP=0x00000030 (0xC00 - System call)

BSD process name corresponding to current thread: WindowServer

Mac OS version:
9L30

Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac11,2

System uptime in nanoseconds: 41861701684921
unloaded kexts:
com.apple.driver.Apple02DBDMAAudio 2.5.8f1 - last unloaded 6360471220
loaded kexts:
com.apple.filesystems.autofs 2.0.2 - last loaded 1102430101
com.apple.driver.AppleTopazAudio 2.5.8f1
com.apple.driver.AppleOnyxAudio 2.5.8f1
com.apple.GeForcePPC 5.4.8
com.apple.nvidia.nv40halppc 5.4.8
com.apple.driver.AppleTexasAudio 2.5.8f1
com.apple.driver.AppleTexas2Audio 2.5.8f1
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.PowerMac112ThermalProfile 3.4.0d0
com.apple.driver.AppleDACAAudio 2.5.8f1
com.apple.driver.AppleSCCSerial 1.3.2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.IOI2CSMUSat 1.9d0
com.apple.driver.IOI2CLM7x 1.9d0
com.apple.driver.AppleUSBDisplays 2.0.2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleK2Driver 1.7.2f1
com.apple.driver.IOI2CMaxim6690 1.9d0
com.apple.driver.AppleSMUMonitor 1.9d0
com.apple.driver.IOI2CMaxim1631 1.9d0
com.apple.driver.AppleI2S 1.0.1f1
com.apple.driver.IOI2CPulsar 1.5.2d0
com.apple.driver.IOI2CControllerSMU 1.1.1d2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.AppleUSBMergeNub

___________________

Allan
tiger

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The nvidia graphics chip on the graphics card may be failing.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi a brody;

    RATS!

    Thanks. I have been saving my pennies to replace the G5 Quad so I don't really want to replace the graphics card this late in the game. I guess I will live with it until it fails completely.

    I better look into migrating over to my MBP just in case.

    Can you give me a hint as to why you say that the graphic chips is going bad, please?

    ___________________

    Allan
    tiger

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Allan,

    Can you give me a hint as to why you say that the graphic chips is going bad, please?

    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForcePPC(5.4.8)@0xab7000->0xb52fff
    dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x81e000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x61c000
    dependency: com.apple.NVDAResmanPPC(5.4.8)@0x836000
    dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x7f8000

    See if it'll Safe Boot, using less of the Graphics card.

    EDIT:

    Get Temperature Monitor - 4.51 to see if it's heat related...

    http://www.versiontracker.com/dyn/moreinfo/macosx/19994

    And/or iStat Pro...

    http://www.islayer.com/apps/istatpro/

    If you have any temps in the 70°C/160°F range, that's likely it.

    Message was edited by: BDAqua

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi-

    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000002

    That's one of the most common, and hardest to trace, panics.

    The Geforce drivers are first in line in the list of loaded kexts, but I/O involvement is the issue.
    I wouldn't run out and buy a graphics card just yet.

    It could still be RAM, or, an VRAM error due to bad RAM.

    Have you run the Apple Hardware test?
    You should.

    Removing, cleaning and reseating the graphics card is necessary.

    Testing the RAM with Memtest or Rember is necessary.

    Has the system drive been repaired with Disk Warrior lately?
    If not, you should.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi japamac;

    I just downloaded your suggested utility, Temperture Monitor. It tells me my graphics card is running at 109 C. That doesn't sound good at all.

    Thanks.

    ___________________

    Allan
    tiger

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Check that the fan is turning.
    A GPU target temp is 80ºC (or less).

    BTW, what is the graphics card?

    Make sure that the heat sink is clear of dust buildup.

    One can remove the heatsink and fan assembly, and reapply thermal compound.
    Old compounds and tape wear out/lose effectiveness.
    Most are good for 4-5 years is all.

    Reapply Arctic Cooling MX-2 or MX-3.

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi japamac;

    Thanks. I have been keeping it cleaned of dust. The fan rotates freely when I touch it.

    The graphics card is a 7800GT which I have had for five years in December.

    Allan

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It tells me my graphics card is running at 109 C. That doesn't sound good at all.

    YIKES! It can't run long at that! I think jmac's suggestion of redoing the thermal compound sounds great.

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi japamac;

    The thing I find the most scary about all this is that the fan noise dropped down to zero about the same time the problems with the kernel panics started. I am starting to think that my fan has give up on me. I think I will have to figure out some way to determine if it is spinning. It doesn't appear that replacement parts are available any longer for the graphics card with a quicker search of the web.

    Allan

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Allan-

    You'll have to go third party, which isn't completely a bad thing.
    There are two suggestions on these pages:
    http://www.xlr8yourmac.com/Graphics/mac7800ZalmanVF900.html
    http://www.xlr8yourmac.com/Graphics/mac7800_NVsilencer.html

    The NV Silencer is hard to find, but the Zalman is readily available, and a very good cooler.
    Virtually the same as the NV Silencer, this Thermaltake is available:
    http://www.thermaltakeusa.com/Product.aspx?C=1153&ID=1583

    One advantage of the NV or Thermaltake is external exhausting of hot air.
    This helps not only the graphics card, but also the entire system.

    good related article here:
    http://www.madshrimps.be/?action=getarticle&articID=405

  11. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi japamac;

    Thanks for the links.

    This morning I ordered the Thermaltake. I downloaded the owners manual for it and liked what I saw.

    Allan

  12. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    As per, a number of helpful suggestions in this column, however, first and foremost I would be running memtest from single user mode.

    http://www.memtestosx.org/download/

    The memory controller on this last model of G5 is pedantic at best. I have experienced identical issues on the Dual Core 2,2.3 and Quad, ALL of which were solved by replacing the memory with the correct spec and of similar manufacturer.

    I recently picked up my Quad with 4 x 1GB and 2 x 256GB, all of different manufacturers and it ran like a hairy dog. I have now replaced the memory with 8 x 2GB identical DIMMS of the correct spec and it doesn't miss a beat.

    Are you running all the same RAM and if so, is it all rated at the correct specification? Faster rated DDR2 RAM will work, however, even quality JEDEC modules of 667/800Mhz I have tried have all been reported as PC3200 - DDR400.

    +Power Mac G5 (Late 2005) - DIMM specifications+
    +• PC2 4200, 533 MHz, DDR2 DIMMs+
    +• 240-pin module+
    +• Maximum number of memory devices on DDR2 SDRAM: 18+
    +• Nonparity+
    +• Unbuffered (registered or buffered DDR2 SDRAM cannot be used)+

    +Either error-correcting code (ECC) or no error-correcting code (NECC) modules+
    +Note: Do not mix ECC and NECC memory modules within a pair.+

    Unfortunately, the AHT that comes with the machine is fairly useless for identifying memory problems.

    Give memtest a go and see if the Quad passes that successfully.

  13. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Reyne;

    Already tried that when the problems first started. In fact did it three times. Even moved the cards around and eliminated pairs of them since I have three pairs of cards. Sorry to say that all of the memory testing did nothing to help the problem.

    Allan

  14. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm sorry to hear that Allan. I see you have had that Quad for a while indeed.

    As japamac states, these kernel panics are difficult to resolve.

    I just removed an OEM 7800GT from my Quad and replaced it with a 7800 GTX. You should be looking at an idle temp in the mid 40's centigrade. Whilst the 7800GT OEM card has a woeful fan on it, to have 5 years trouble free service from the card is still a good cost of ownership.

    Hardware Monitor gives a number of very good readings on the Quad, including GPU tempurature and zone readings in the G5 also.

    I hope you get the temp sorted on your video card and that no permanent damage has been done.