Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm trying to capture some footage for a client to edit themselves off these DV Tapes
it stops every 9min 24sec 29frames
my scratch disk is set to my external which has 300GB left on it and no limits are set with it.
I figured I'd just start up capture each time it finished and place the clips together, but they're missing frames.
What's going on?
The only thing that is set for the scratch disk is:
Minimum Allowable Free Space on Scratch Disks: 2047 MB
Please help ASAP, the client just informed he wishes to pick up the footage tomorrow (originally i was going to edit, and I was going to edit over the weekend)
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi -
Is your external drive formatted as Mac OS Extended? If it has Windows Fat 32 formatting, there is a 2 GB file size limit which may correspond to the repetitive stopping of the capture process.
Hope this helps.
MTD
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
yup formatted for mac
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry for the basic questions but:
Format of the video?
Easy Set Up you chose?
Logging and capturing, or using capture now?
Thanks
MTD
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
No need to be sorry
here's everything I can think of:
DV Tape, 24p 480i (is this what you mean by format?)
Easy Setup Panasonic DVCPRO
Logging and capturing
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
And you are using the pull down removal setting?
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
no, what does that do while we're at it though?
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, what I am asking is if the tape was recorded at 24P (23.98) or if it was recorded at 24P with pull down added so that it is 29.97. You mentioned 480i which would be the latter with the pull down.
I assume this is a Panasonic DVX 100B Camera?
I have heard of cases where the pulldown cadence gets screwed up in long duration clips, which cause FCP to bump out of the capture process.
MTD
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
close a Panasonic hvx200a (only a 16gb p2 card so i had to use DV for this event), so what do i need to do?
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, this is beyond me - I have zero experience with the P2 system.
Sorry I can't help - maybe someone with P2 knowledge can jump in.
But . . . two questions:
When you ingest from the P2 card, you do use Log and Transfer, correct?
Also, if you click on a clip that is in the browser and type Command + 9 to see the item properties, what does it say for the Vid Rate?
MTD
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I wasn't using the p2 system for this gig, i was using the DV tape part of the camera (it does both)
I was using command 8 for the log and capture
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, understand.
Did you get a chance to see the item properties and see what the Vid Rate of one of your captured clips is?
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
no where do i go to check these for you (thanks for the help btw, i REALLY appreciate this)
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
click on one of the clips that you have ingested that is in your bin.
Type Command + 9 and the item properties window will open that will give you all the info about your clip. If you look about half way down you will see a VId Rate row. I wanted to see if the clip was 23.98 or 29.97.
thanks
0
JPschmidtfilm·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ah sorry its late.
29.97, actually
0
Meg The Dog·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, so we know that you shot at 24 fps with the camera adding pull down to make it 29.97. This makes me suspect the cadence thing, but I am no expert.
As a test, go into Log and Capture and cue the tape to about 30 seconds before where FCP bumped out of capturing (the "problem area") and then put an out point 30 seconds after and try capture that 1 minute segment. I want to see if it stops digitizing because of a problem at that point in the tape.