Imported from the Apple Support Forums via the Wayback Machine 🔗
I get clicks & glitches when I automate logic plugins to turn on/off (bypass) on an audio track. The clicks & glitches happen at the point in the automation when bypass turns on and off.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Are these clicks and glitches different from if you manually turn the effect on/off? I mean, bypass the automation and manually click the bypass button at the same point in the song.
This will tell you if the sounds you are hearing are from just turning the effect on - not the automation (my guess). In which case you could either automate the wet level of the effect, or put it on an aux and automate the send to that aux.
0
tbirdparis·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Certain fx plug ins unfortunately just do that when you switch them on and off while audio is passing through them. It's not technically a bug, it's just the way the audio is handled by the plug in that means it can't manage to cleanly cut in and out. When this happens, you have to use alternative methods such as the one already suggested. Depending on what you need to do there are other ways around this. If you're able to engage/disengage the plug in at moments of silence in the audio (such as in between words in a vocal track), then you could use volume automation to go in very precisely to silence the clicks when they happen. But if you're automating the effect on continuous audio, sereen's suggestion of using an aux and automating the send is a more appropriate workaround. Another technique is to just bounce an entire copy of the track with the effect on it, and then just edit it in and out (still on a separate track if you like) as needed, this way you can use fades as well to clean it up. But this is only appropriate in certain situations and might not be the right approach depending on what you're doing.
0
spheric·
Imported from the Apple Support Forums via the Wayback Machine 🔗
tbirdparis wrote:
Another technique is to just bounce an entire copy of the track with the effect on it, and then just edit it in and out (still on a separate track if you like) as needed, this way you can use fades as well to clean it up. But this is only appropriate in certain situations and might not be the right approach depending on what you're doing.
Or (for reverbs and the like), create an empty second track identical to the first, except with the plug-in in the channel strip, and move the audio bits you want running into the effect down onto that track.
0
Data Stream Studio·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I usually put the effect on a bus and automate the bus send up and down on the track instead of using the bypass.
0
IGMMMM·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks so much everyone. The suggestions helped me a lot.