Forwarding PPTP through Airport - Connection Drops
Imported from the Apple Support Forums via the Wayback Machine 🔗
This is really a general Airport question (as I am seeing this on multiple products) but the product exhibiting the issue is a first generation Airport Time Capsule running firmware 7.4.2.
The set up is as follows:
- Airport WAN connection has a public address
- There is no double NAT
- Airport configured to Share Public Address
- Airport is providing DHCP to LAN clients (range 101 to 150)
- One port forward rule exists: PPTP (port 1723) forwarded to internal OS X Server running PPTP VPN
The problem is that using an Airport to forward PPTP to the Xserve results in a connection drop after about 4 pings. I am able to establish a connection, but once the connection is established and authentication is exchanged, I get about 4 pings (5 seconds) or connection and then link goes dead.
If I reboot the Airport, then I can get up to about a minute of access then another halt. Then the time to failure decreases until the 4 sec connection detailed above.
Is anyone else using an Airport as a gateway with port forwarding? Has anyone else seen this poor performance issue
Thank you for any feedback
0 replies
Sign in or join Beachball Help to reply.