eMac Raster Shift problem
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi All, I got an eMac 700Mhz in Jan'09 this year with the infamous Raster shift problem for SGD70.00. Managed to download the eMac take apart step by step instruction. Took a day leave and started my expedition exporing the inside of eMac.
As I am electro-mechanical academic trained the instructions was still very useful and in time, I had disassembled to the bare bone of the IVAD box and to the Farady's shield were all out. All this allow me to check all cables and connected link up to the IVAD cable inside CRT. Removed the IVAD (first remove the heat sink), inspected it and found some pins were loose either from my pulling it out or it had came loose graduately throughout the years from the curvature it was bend and the temperature.
Inspected and tested the resistivity of the IVAD cable with a voltmeter. Seems good, pushed all pins backed into position with the tweezer, cable tied and use hotmelt glue around the wire-pins insertion side making sure all are firmed and well insulated. On mounting, I moved the ferrite core beside with the other CRT core.
Before putting eMac back together, got the chance to hose off and clean up the casing. Oiled the fan and removed the wore out sponge sealed. Vaccum and clean up whatever seems dirty even the inside of the speakers box.
Put everything back to together and prayed to God, if this is for me make it work. Wah-lah! my prayers were answered. It booted up with the regular chime and on status light but with a black blank screen, just a couple seconds later the apple appear but screen was yellowish. Oops! something went wrong. Shut it down with the menu and rebooted it. Wah-lah! 2nd time my prayer were answered, the chime, the light and the apple on a grey bright screen. Burn-in for 12 hours without shutting down with sleep mode on and off. And it still work after 2 months.
Things to note; after removing the stand, and all the reviting hex screws from the casing. Be very careful when lefting up the casing because the on-off switch is still attached the casing.
Use a 3 pin plug cable with the grounding pin still plug into socket and leave the unit off to drain out any static or electrical charge still in the unit especial in the CRT as I do not have the CRT discharge tool. Touch the farady or any metal part before you disassembly the eMac.
On assembly, make sure all connection are hooked up and make ink markings with screws with differenct colors before you unscrews any screws inside the unit and place them into different partition box. I used the egg packing tray for this purpose.
Hope all this helps. Enjoyed your own eMac expidition.
Take care and think safety first, rather loose the eMac than injure yourself.
1 reply
Sign in or join Beachball Help to reply.
- 0