Benches Uncategorized

6

"Export Track as Audio File" doesn't crea…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

This is a weird one. I'll admit it seems like it must be user-error. I have a complete set of sounds I created where I want to export each individual track as a sound file (AIFF). (This is for sound design and not music production.) I select a track, then select File>Export>Track as Audio File... I select a location from the File Save window and click Save.

Logic acts as though it is exporting the file, shows the Exporting Track dialog. The progress bar fills in, and the dialog disappears. I look in the selected folder, and there is nothing. It doesn't matter whether I have "Hide Extension" checked or not. It doesn't matter whether I have "Add Resulting Files to Audio Bin" checked or not.

No file is ever created.

When I select "All Tracks as Audio Files," I get similar results. This seems like it should be straightforward, but it isn't working, so my first guess is I'm doing something simple, incorrectly.

Any help would be appreciated!

Update: If I right-click on the track, and select "Export as Audio File" from the pop-up menu, I can export the track. However, the exported track does not seem to include fadeouts that I built into the sound, so I'm still looking for tips. Thanks.

Message was edited by: David Green4

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    Foxboy71

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    first to make your work easier: Solo the track you want to export and bounce the project. This should work for you
    and includes all automation (fade etc.).

    To export, select the track you want to export and hit CMD-E. Make sure you have the correct file format and have sufficient rights to access the save location. Click "Add to Audio Bin" -> is there a file added to the bin at least?

    Try to freeze the track -> there should be a freeze file created in the project folder/freeze files

    If Export fails all the way, try out the export function with a new and empty project. Just record some audio and export the track. If this works, your project file may be messed up somehow.

    If all fails, try to reset Logic's Preferences by renaming the appropriate .plist file to .bak (Logic will create a new one).

    If even this fails, ask the gurus in the Logic Pro forum. Maybe they know better than i do.

    Cheers,

    Fox

  2. 0

    David Green4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you. Bouncing the track did work. I tried it on one track and got the track with the effects, but it also includes silence to pad the track out to the length of the entire project. That's OK, because I can always trim it with an audio editor, though of course I'd like to avoid the extra step.

    I couldn't find a "Freeze" menu item, so I will look that up. Thanks for that lead.

    CMD-E just doesn't work... That is my main issue, and what I'd like to resolve. Thanks to you, I now at least have some additional workarounds, but it would be nice to fix that. I did try deleting prefs. It didn't help.

    What I did notice this time though is that if I open the folder where I've asked Logic to place the files immediately after it's done, the file briefly appears (<1 second) and then just vanishes.

  3. 0

    John Alcock

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    To add a little to Fox's help:

    I tried it on one track and got the track with the effects, but it also includes silence to pad the track out to the length of the entire project.

    In the Bounce dialog, set the Start and End locations (under the destinations menu)

    Note that bouncing length is set as above - export is from the start to the end locator of the entire song length (set in the transport bar).

    CMD-E just doesn't work... That is my main issue, and what I'd like to resolve

    It should - but it depends on what you're trying to export - it doesn't work with aux tracks returning the outputs of a multi-channel instrument, for example. What type of track are you trying to export, and what's on it?

    What I did notice this time though is that if I open the folder where I've asked Logic to place the files immediately after it's done, the file briefly appears (<1 second) and then just vanishes</div>

    That happens if Logic writes out a file and then realizes that there's no content in it - so Logic says "oops!" and removes the empty file. AIFF or WAV etc. are just containers for PCM digital audio, so it writes an 'envelope' if you will, to put something in.

    Here's something you might consider (I'm an LP8 user but I think this works in Express)

    If you have a bunch of separate tracks with automation, fades etc and you want to create separate files for them all, set the output of each track to a separate bus. 10 tracks (or aux tracks) = outputs Bus 1-10

    Now create 10 audio tracks. Set the input of each one to each individual bus. Select record on each one, press record and you will get 10 audio tracks, complete with all FX and automation in one go. Your new, complete, files are in your audio files folder.

  4. 0

    David Green4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for your hints. Every little bit helps. I was able to set the length of the bounce track as you described.

    The workaround with setting the Bus for each output track seems useful, but also like a lot of extra work. I will keep it in mind though, if I run into more problems.

    I am trying to export a single track, consisting of a sound effect; for example, the Church Choir from the Choir instrument. It is a simple chord of three choral voices in a closed fifth. It is about 5 seconds long. It is about as simple as you can get! I record the chord, I can see it and play it back, it sounds great, and then I try to export track, and get nothing. As I noted, this is when I use CMD-E or select it from the menu. When I right-click on the track, it seems to work, but I'm not getting the fades.

    Thanks again for your help.

  5. 0

    John Alcock

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Very odd - I just tried it - 5 sec. of the same instrument, and it worked fine, so I have no sensible suggestions, sorry.

    When I right-click on the track, it seems to work, but I'm not getting the fades.

    Remember, export = no fades, no pan. Bounce = fades and pan included.

  6. 0

    David Green4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, that is helpful to know.