2 plastic hooks on power supply...
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm wondering what the 2 hooks are that swing out on the Apple MacBook power supply? The hooks are located on the side that the cord comes out of (also on the opposite side from the plug-in prongs.
12 replies
Sign in or join Beachball Help to reply.
- 0
Kapilipono ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think its to wrap the cord around when you are transporting the cord! Cool, huh!
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
- 0
Michael K Murray ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Particularly useful if you travel without the power cord attached and the pins coming directly out of the brick.
Michael
Message was edited by: Michael K Murray
- 0
Macaby ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Guess I'm not a problem solver since this solution never occurred to me.
- 0
y_p_w ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Apple power supplies have used modular plugs and the swing-out hooks since at least the dual-USB iBook came out. My iPod FireWire power supply is the same.
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I would avoid using those hooks. It has been found the stress put on the wire coming out of the brick when you use the hooks is so great as to cause the cables to fray. If people find this does happen to them, I'd suggest they post feedback to
http://www.apple.com/feedback/and ask that the L shaped ends be made wider, or the joint at the brick be made stronger.
- 0
impulse_telecom ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I agree. I thought it looks like wrapping the cord on the swing-out hooks might put too much strain on the cord. See article
http://docs.info.apple.com/article.html?artnum=306446 for information about Apple's suggested cord winding technique.I decided to wind my adapter's cord in a loose figure eight, then secure it with a double sided Velcro brand strap.
Bill
- 0
Michael K Murray ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've always done something like the Fig 13 in that Apple doc. I think if the cable is leaving the adapter at right angles and does only a gentle curve there can't be any strain.
Michael
- 0
BiggAW ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The other problem this winding technique creates is that it crimps the cable so that it doesn't want to stay completely straight when unwound. Because I use the full length modular cable, I just take the two cables and wind them around my hand, and then throw the whole thing in my bag. The circular winding puts little strain on the wires and is very fast.
I do like the hooks on my old iBook server, as it keeps the wire out of the way without velcro ties, and it is permanent setup, so no worries about stress fraying there.
- 0
impulse_telecom ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I use a piece of Velcro brand strap to bundle the MagSafe cord instead of using the flip-out hooks. I've done that since I bought the MacBook, even before Apple posted the advisory article on their web site. Winding the cord on the hooks, to me, looked like it would put too much strain on the cord.
Older Mac notebooks have a yo-yo shaped power supply with a slot for winding the cord. I'm presuming the square supply is cheaper to manufacture. The older design was definitely more hip and stylish than new new bland block shaped power supply.
Bill
- 0
BiggAW ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The block may be needed to house more components in order to make it more efficient. The newest generation, for all Macbooks I think, is Energy Star rated or something, so they have much better efficiency then older models, and they have been engineering them better over time.