Imported from the Apple Support Forums via the Wayback Machine 🔗
I've generated a SMPTE-code with my Motu Ultralite-software and recorded it to an external tape-machine. When I play it the sound reaches the soundcard at channel 8 (as I have defined in the Motu software) but I don't know how to tell Logic where to find it. In other words, Logic can't seem to find the sync/SMPTE-code. Anyone know how to solve this?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Check the Scyn preferences of your project (Project prefs->Sync). Synchronization should be set to Auto (tick the little box underneath the Sync settings) so Logic should detect any incoming SMPTE/MTC Timecode and play when you enter the correct offset.
0
Community User·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Master Sync Machine must be the slower one
so Logic must be set as Slave and the Tape Recorder will be the Master!
G
0
noeqplease·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
Logic does not directly see SMPTE.
Logic needs a SMPTE to MTC converter in order for Logic to "see" the synch signal.
I use a Unitor8mkii, which does the conversion to MTC from SMPTE, and then feeds it to Logic.
You can try a Motu MTP/AV to do this. The Ultralite can't do it...
Cheers
0
Pancenter·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Are you sure Logic can sync directly from a SMPTE audio signal, I've always converted it to MTC.
Pancenter-
0
Sampleconstruct·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I used to do this a lot in earlier versions of Logic syncing via SMPTE recorded to one track of a VHS (before we had quicktime movies). Unless L8 has changed in this respect I'm very sure.
0
Jonteman·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, thanks for your answers!
Is it possible to sync Logic with a Digi 002 with SMPTE, or is the same thing as with my Motu Ultralite...that I have to buy a converter?
0
noeqplease·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
What box did you use to hook up the SMPTE to the computer?
Cheers
0
Sampleconstruct·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You're right Noeq - I was wrong - Logic only reads MTC so my old Midi Interface must have transformed that into MTC. I just read the manual about this again, so sorry for being "sure" 🙂
0
noeqplease·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Jonteman,
You need to get a synch box that will translate SMPTE into MTC.
Unitor8mkii is good, if you can find one.
Motu makes great ones, like the MTP/AV one.
Cheers
0
Jonteman·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks!
0
noeqplease·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Sampleconstruct,
No problem, my nickname used to be "synchboy" in the old tape days...
Cheers
0
Pancenter·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I still have my old Cooper Electronics PPS-1, it's just a sync box only.