Benches Uncategorized

5

My Alesis Multimix 8 USB is not sending a…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

So i bought this Alesis Multimix 8 USB mixer and i plugged it into my macbook. I'm using logic express and i'm totally lost and confused. As you can see by my alias thing it has been frustrating me for a couple days now. I've tried going into settings->preferences->Audio... and under core audio i changed the device to the USB Audio Codec. I assumed that meant the usb mixer, although i still do not get any signal. Do i need to change the input to Bus or whatever that is? Please someone out there help me.

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Brazeca

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First of all, calm down dude!

    Secondly, does this Multimix device have a driver? If it does, have you installed it?

    Third, if the driver is OK, make sure you turn the device on BEFORE you launch Logic.

    Fourth, if this mixing console can work in standalone mode (of which I am sure), check the signal by plugging your headphones into a headphone jack. It may be that there is a connection problem or mute function/button is on or anything like that.

    Finally, in Logic you should check:

    that this device is selected as active input device (Prefs -> Audio)

    that you created Audio track and it is armed for recording or Input monitoring is on

    that the instrument you plugged into it has its volume up and that you haven't mixed up inputs with outputs

    well basically, this is your checklist man. go through it methodically and I am sure you will sort it out

    Good luck!

  2. 0

    screwthisstupidalias

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Alrighty. I'm getting a signal and the mixer's working. I've been reading the manual and all that good stuff but how can I play back what i've recorded on logic through the computer speakers, which are hooked into the headphone jack of my macbook, instead of the headphones connected to the mixer?

  3. 0

    Alfredo Jahn

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This is what I do. Close the project. Got to Apple System Prefernces (Sound). For output select Line Out Built in Audio. Then in Logic, select prefs Audio -> Built in. Then open the project and play. It should now be coming from your computer's speakers (or head phones if you have them connected). Not sure is closing the project is required. If it doesn't work. Close down Logic, then reopen after changing settings.

  4. 0

    Brazeca

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Isn't this Alesis Multimix device supposed to work as audio interface? I mean, can't you just connect speakers to the Stereo Out sockets of your mixer, instead of using built-in audio? Or the idea is to use built-in output for playback? Perhaps you could configure the Aggregate device, combining Multimix and Built-in sound card.

  5. 0

    John Alcock

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Brazeca's suggestion solves this for you.

    In Logic 8 (in 9 it's fixed), you can't have two separate devices for your input and output, which is what you're trying to do.

    So you need to create an 'aggregate device' which combines two separate devices (the Alesis and built-in audio in your case) into one virtual device which you then select in Logic's audio preferences.

    Here are the details on how to set this up:

    http://support.apple.com/kb/HT1215