OS 10.5.8 and Epson 2200
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just installed the latest drivers I could find on the Epson site to run the 2200 Stylus Photo. I cannot access the color management controls in the print dialog box (they have a line through them as well as the print settings and paper controls) If I launch Photoshop using Rosetta I can get the dialog box to show the controls without the line, but it crashes the program when selected.
Can anyone give me some clues as to how I can get some control over the output with this printer? I can get it to print without these controls, but the output is low quality and color balance is off.
13 replies
Sign in or join Beachball Help to reply.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had this earlier also, but on 10.6.
Try this:
1. Remove the printer using the Print & Fax control panel.
2. Delete the /Library/Printers/EPSON folder
3. Reboot
4. Re-install the printer driver as downloaded from the Epson site
5. Apply the Common Updater patch (downloaded from the same page)
6. Re-add the printer.Hope this helps.
Best,
Jeff - 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks Jeff. I'll have to give that a go when I make the move to 10.6. At least now I'm not apprehensive about moving to Snow Leopard. I did get it to work with the Gutenprint driver after playing around with some of the settings.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Roy,
Actually, 10.6 isn't working terribly well for the 2200, I'm sad to say. It prints, yes, but doesn't print very well. See here: http://discussions.apple.com/thread.jspa?threadID=2137715&start=0&tstart=0
Personally, I'm going to bring my old G4 out of retirement and set it up as a print station. Given Epson's reluctance to support their "legacy" hardware, I don't anticipate seeing any updated drivers.
Best,
Jeff - 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Actually, 10.6 isn't working terribly well for the 2200, I'm sad to say. It prints, yes, but doesn't print very well.
Well, the last rumor is that help may be on the way. I like your plan of dusting off a dedicated G4 to run the printer as a stand alone. I've been wondering what to do with my old laptop....
Thanks again.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am also having issues with the Epson PS2200. I have it connected to a G4 Power PC 933 MHz, 1.5G RAM and it is running 10.5.8
Before I recently installed 10.5 the printer was working fine with 10.4. Now with 10.5.8 I cannot access the Epson Print Utility to clean the print heads, alignment, etc. I can get it to print using gutenprint but I really need to access the print utility to get it working properly (the heads need cleaning).
I have tried some of the solutions on here so far with out any luck. Has anyone been able to get the print utility installed and working with 10.5.8 ? If so how.
I am about to try installing the 10.4 drivers to see if they work.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am having the exact same problem. I am using Photoshop CS4 with my G5 PowerPc and photoshop crashes whenever I try to select print settings in the epson dialog box. I have tried suggested: removed Epson printers from library, renstalled driver and updated, added printers again. Still have exact same problem.
Any solutions?Frustrated! Trying to print a photo on Epson fine Art paper for my wife's birthday!
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm experiencing the same problems. I'm running OS10.5.8 on a Mac Pro desktop. I'm using CS with an Epson 2200. I had two problems:
1-System did see the printer and I couldn't add the Epson 2200 through the "Add Printer and Fax" utility.
2-Photoshop crashes when I attempt to access the Printer Setting (Color Mgt., etc.) in Photoshop.I fixed the first problem by:
1- Update the OS to OX10.5.8... reboot.
2- Ensure that your using a 400/mbps firewire cable and not an 800, that no longer that 8ft. Connect it directly to the computer and not through another firewire operated device.
3- Go to the "Print and Fax" utility in System Pref. and see if you can add the 2200. If you still can't continue to set 4 anyway.
4- Install the Epson EasyPrint v3.10 and reboot.( http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14402&prodoid=20306147&infoType=Downloads&platform=Macintosh )
5- If you weren't able to see the 2200 in the printer setup before installing EasyPrint, check to see if you can now.
6- Install the "Common Updater" and reboot.This should at least get you past my first problem. I'm currently working on the 2nd issue today... will update if i get any results.
I'm trying to isolate the problem. Is anyone having the same problem with any other version of CS?
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
URGH!!!! Epson *****!
I was able to get in touch with another digital tech and he told me that Epson as stopped supporting the Epson 2200 with regards to the Mac OSX 10.5. They are not going to be providing an updated driver for this operating system. You'll be able to print standard quality print-outs from any application but you can give up any hope of making photographic quality prints with any application including Lightroom.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same exact issue on the same system and OS. Here's the fix...
1. Go to System Pref. / Print and Fax
2. Hold the control key and click on the printer in the window on the left.
3. Go to your hard drive and Library folder and delete the folder titled Receipt; go into the Printer folder and delete the folder titled Epson.
4. Empty the trash and restart.
5. Download the following files from the Epson Support and Download site.:http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14402&prodoid=20306147&infoType=Downloads&platform=Macintosh
Printer Driver v3.0aAs
Common Updater
Epson EasyPrint v3.106. Install all three in the order above and restart when all three are done.
7. After the restart go back to System Pref. / Print and Fax
8. Hold the Control key and click with the mouse on the blank printer box. Select Reset Printer.
9. When it's done, click the + to add printer, select more printers, usb or firewire, and add the 2200.
10. Done!These steps worked for me. Let me know how it goes for you!
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have been looking for a solution for this problem since March. At times I can get the 2200 to print text, but the photos have lines of dark and light colors. Since this is a photo printer this is not acceptable. I just followed the instructions that worked for you but I only found limited success.
I only have 3 of the 6 paper profiles to choose from even after re-installing all 6. Also the 2200 still removes itself when this Mac goes to sleep or is restarted. Don't forget still no photo quality printing from iPhoto or Adobe.
Do you know of any fixes for these 3 issues?
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Even more problems now. I read on a web site that there is a Generic Epson driver so I went looking. I found a driver kit and downloaded it but I could not open it.
I get "This volume does not meet the requirements for this update". Is there a Generic driver available for Epson printers?In the preferences window, in the screen where you change drivers, the existing diver is grayed out and cannot be changed. This has never happened before. Why would this be happening now? Even if I find a new driver, I may not be able to install it if this remains gray.
Help!!!!
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I recently got a new intel core duo laptop running 10.5.8 and just ran into a brand-new problem with my Epson 2200 that I haven't seen covered here yet. It prints fine from most apps, including MS Word, but it will not print Excel documents. Immediately after I hit the print command for an Excel document, the 'paper out' light on the printer goes red, and I get the standard error message 'paper out or not loaded correctly'. I know this is not a true paper-path problem but an Excel-triggered problem because I can switch to any other app and print fine.
Anyone have any suggestions or thoughts?
FYI, I am not using the Gutenprint driver.
(My current workaround is to use SnapZ Pro to take screenshots of my Excel spreadsheets and print that way. Tedious, but it works just fine. This isn't the first time that Snapz Pro has saved a messy printing situation from turning into a catastrophe, either--it's a great piece of backstop software.)
I like my Epson 2200 so well that I will go a long way not to have to ditch it...
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Since I upgraded to a MacPro and OS 10.5.8, I've had numerous problems with my Epson 2200. I print from Quark or a pdf. The printer is connected via USB. Most of the time, the prints were so light that you could barely detect the color, or, I would lose contact completely w/ the printer.
I followed your 'fix', rebooted several times, and I'm now able to get reasonably good looking prints!
Thank you SO much!!!