Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello all:
And yes, yes, before I get the sanctimonious wiseguy quips about "should have recorded it right in the first place/can't get there from here" and other generally unhelpful remarks and platitudes.... "I KNOW ALREADY!"
So down to the subject at hand. I have to edit source video that was recorded in a very live room. The sound guy did his best to kill the reverb with baffles and sound blankets. etc. but some reverb/slight echo remain. Does anyone know of a software application that can at least smooth it out or advise on how to EQ it so the ring is not so noticeable?
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is a high end box called Cedar. Call around and see if anyone near you has it. It can do some amazing things but your case, send them them a file and see what they can do. Echo is "time" and most audio forensics is "frequency". Good luck because luck is all you have now.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I know of nothing software wise to help a problem dealing with your problem. As you are aware, video without good audio creates bad video.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Wow, such insight! Thanks that's really super helpful.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
can you post a small sample of it so we can tell how bad it is
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for all the responses. I've actually fixed it using a combination of eq and a super sensitive noisegate filter. It was pain to do but got the job done. Phew.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
cool
like I said if you can post a before and after that would be cool as well (good little how too opportunity)
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for all the responses. I've actually fixed it using a combination of eq and a super sensitive noisegate filter. It was pain to do but got the job done. Phew. < </div>
I'm trying to figure out a response to this that would equal your original's presupposition but the best I can do is say thanks for offering up a helpful contribution to the "remove reverb" discussions. Future searches will find your thread and maybe you have given them some hope.
Numerous threads on the same topic often end in frustration because, literally, nothing can be done to reduce echoic reverberation because the overlapping sounds are picked up by a single microphone.
bogiesan
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You can make things a little better by using an expander, since the reverb is (hopefully) not as loud as the main sound. That can work well if the sounds don't overlap too much.
Another trick is to find the main resonant frequency of the room sound and filter that out with a notch filter. That can help because reverb is not flat (not equally loud at all frequencies).
Finally, if the recording was made in stereo, you can mix left and right together to make a single mono track. That can work quite well, since it really does reduce the reverberant sound.