Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a dual 2.3Ghz G5 Xserve that has started to "lose" the fibre-channel card after a while. The RAIDs still show up but everything else drops off. When this happens I look at the Fibre Channel setting in System Profiler and it shows up blank. It will show up after a reboot but now at 25 days uptime and some heavy usage it's gone again. I checked the card it seems well-seated, so I guess I'll try the voodoo "re-seating of the card" but I have a feeling that's just hand-waving at this point.
So I guess I'm looking for a replacement card that will work with my older PCI and 2Gbps fibre system. Anyone have the spec for the original card handy and/or a source for replacement? The spare parts kit doesn't contain a fibre card does it?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Anyone have the spec for the original card handy and/or a source for replacement? The spare parts kit doesn't contain a fibre card does it?
You're right - there isn't one in the spare parts kits, but you should be able to find one via AppleCare Support (or through an Apple Dealer who can order repair parts - the part number is 661-3174.
If that fails I believe I have a couple of new-in-box (unopened) cards that I never deployed in my network. I'll check my datacenter if you'd like.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks Camelot, if official channels fail me I may take you up on that.
=Tod
PS I think 661-3174 might be the RAID card number not the fibre channel.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
PS I think 661-3174 might be the RAID card number not the fibre channel.
Oops, I think you're right. I was probably thinking 'XServe RAID' at the time.