Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey Japamac, I have a question for you regarding MX2. How did you apply the paste to your CPU's, and GPU's? Arctic Cooling instructs to put a small dab in the center of the CPU, +but not to spread it+. The paste is spread by rotating the heatsink after it is installed. See the instructions [here|http://www.arctic-cooling.com/further_prod2.php?idx=140&data=3&disc=]. This application technique seems a little dubious to me. Every other company that I have encountered that produces cooling compounds instructs to spread the paste evenly with a razor, or credit card. What do you recommend?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi-
I placed several small dabs (MX2 is thick) of the compound on the contact pad of the processor, staying within the center region of the pad. I then placed the heatsink on the processor, and removed it, visually verifying complete or excess coverage. If excess, I removed the excess compound from the perimeter with a Q-tip. If needed, added more, then set the heatsink and fired the machine up. As long as the compound covers the contact pad completely, with no gaps, everything will be fine.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sounds good Japamac. Thank you.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Handle that stuff with care. It's nasty. Wash your hands after using it even if you think you don't have any of it on you. It's not toxic it is just very irritating if you should get any near your eyes or in a cut. Google for an MSDS on the stuff if you want to read up on it.