Imported from the Apple Support Forums via the Wayback Machine 🔗
How can I split one stereo track into two mono tracks in Logic Express 8?
I tried to bounce track, then create new project with the two mono tracks and drag bounced L and R channel files back into the new project, but there they both look and sound the same. (Maybe some bug in Logic, or 2 different mics have picked up the sound too much similar?) I hope there is some option to convert stereo track to 2 mono tracks inside of Logic, without exporting and importing back?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi (again) Guntis,
If you want to create two separate audio files, you will need to bounce.
If you want to simply work with the two tracks in Logic, you don't need to bounce.
However, in each case, use the Utility > Gain plug-in to separate the stereo track into its components. You can then either bounce the resulting audio to get two files or you can route the signal to two different busses, each with the Gain plug-in attached, one dealing with the left channel and one with the right.
To do this, though, make sure that the Aux channel associated with each bus is set to Mono. You can do this in the Mixer pane by clicking on Mixer at the bottom of the Arrange WIndow.
That should do the trick.
Pete
0
Guntis Bukalders·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks, problem solved! 🙂
Just looked at your web site - good info! Thanks!
0
Apple Certified Trainer·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's a pleasure. Always very happy to talk about lesser known areas of the program. Makes a change from people asking about trivial topics or when they can't be bothered to learn the program for themselves.
Yes, this is a slightly obscure part of the program, though I doubt Apple will make it more obvious. Put it down to the size of the package, which only gets bigger when you buy Logic Studio instead of Logic Express.
Have fun and feel free to ask questions here.
Best wishes,
Pete
0
bhuss1·
Imported from the Apple Support Forums via the Wayback Machine 🔗
GREAT....I've been searching this topic for help!
Maybe I'm a little dense, but I'm still struggling to split the signal so I can apply different effects to each side. What setting do you use on the bus "gain" set up? Can't seem to pull it off, and I really need to figure it out to help a client.
I can bounce it down but I never get a full mono track...just one side of the track after the bounce...but not out of both speakers.
I really only need to work with it.....don't really need to bounce it to mono....but that's not working for me either. Your instructions seemed very clear, don't know what I'm missing. Any suggestions?