Mapping instruments in Logic? Change midi…
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello everyone.
I am new to Logic. I have Logic Studio Express 8. I also have an electronic drum kit (Yamaha DTXplorer) When I hook the drum kit to my midi device All of the correct drums play except the kick drum and the snare. The kick drum registers at A0 and the snare registers at G0. There is no way on the DTXplorer to remap the midi notes. Is there a way to do this in Logic Studio Express 8? If so, can someone please give me some instructions on how to remap these notes within logic? This would be especially helpful if I ever wanted to change a drum sound.
Thanks,
-Tyler
15 replies
Sign in or join Beachball Help to reply.
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes, you can do this in Logic, and much more besides.
Logic has a Mapped Instrument environment object specifically for remapping drum notes. You can either insert this into the incoming MIDI stream (ie in the environment Click&Ports layer, between the Physical Input object and the Sequencer Thru object) - this means these notes will get transformed on all incoming MIDI and the mapped notes will be recorded, or you can do it after the sequencer part (meaning you're recording the original notes, but only remapping on the fly during playback.
It depends on how you want to set it up. Is the DTX your only MIDI input device?
- 0
DC67 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm not sure this is correct, but depending on which version of Logic we're talking about (Logic Express OR Logic Studio - it can't be both) the Environment functions may be limited. I'm only speaking of my experience with Logic 7 in trying to get PPC plugs working on an Intel Mac via an external aggregate device using Rax/Soundflower in Logic Express 7, and having to upgrade to Logic Pro because the Environment in Express is limited.
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ah - as this is the Logic Pro 8 forum, I expect to be giving advice about Logic Pro.
If in this case the poster is posting about Logic Express, he should post in the Logic Express forum, otherwise it just gets confusing, and and advice given may be entirely useless as he's using a different piece of software with different functionality.
- 0
DC67 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Quite right too, but when someone says (not being peevish, just, like, get it right, ok?) they have Logic Studio Express, you should be wary. It's like asking someone where they saved their lost document and they say "I saved it in Word".
- 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you for the reply. I am pluging the DTX straight in to my Echo Audiofire12.
On a side note, I am using Logic Studio Express 8. Sorry if this is the wrong forum section, but if you are willing to give the advice anyway I can try and see if there is a difference between studio and express in this matter.
Thanks,
-Tyler - 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, you're right, I was just saying I didn't really notice because I expect the posts in this forum to be about Logic Pro, and answer in that capacity.
I don't post in the Express forum simply because I don't know the exact feature differences in Express (as I don't own it) and therefore my advice would be potentially wrong (and therefore a waste of everybody's time...)
And yes, some of the long-timer's around here know that I'm a stickler for correct terminology (which is fun, because there are concepts in Logic where the terminology has changed over the years. I still find it clunky to say "MIDI regions" rather than sequences - I understand why they renamed it for reasons of simplicity, but MIDI regions are
not regions, there are complete entities, totally unlike audio regions, which
are actual regions onto a different, larger entity (the audio file).Yes, the new way is less confusing, but still bad, imho... 🙂
Little minor rant there... 🙂
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is no such thing as "Logic Studio Express 8" - there are two versions of Logic, Logic Pro (which comes in the "Logic Studio" bundle ("Studio", because it contains a whole bunch of related applications in addition to Logic Pro),
or Logic Express (which isn't a Studio bundle, because it's just Logic Express).But anyway, the thing is, there is no point spending half an hour step-by-stepping a procedure which may be totally useless to you if the software doesn't contain even one of the necessary features. I want to give the correct advice to the best of my ability. In Logic Pro, the answer to your question is "Yes, there are lots of ways to do it", but the answer in Logic Express
might be "No, you cannot easily do it in Express" - or it might not. I have no idea what the answer to your question is with Logic Express, hence I wouldn't attempt to answer it if I had realised you were not talking about Logic Pro.As I've said, I do not know intimately what features exist or not in Logic Express - this is the reason why you are best off posting in the correct forum.
(Anyway,
if LE has an environment, and
if you have access to the physical input/sequencer thru cabling, and
if LE has a mapped instrument object, that's the way to go about doing it.) If it does not, you could probably do it via some other solution, such as putting using MIDIPipe on the MIDI stream before it hits Logic... - 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you very much. I will post this in the other forum. Thanks for the information though. This was my first post on these boards and I didnt realize there was a seperate section for Express.
Btw, I do have access to the Environment -> Mapped Instrument section with cabeling.
Thanks for your help,
-Tyler - 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you are interested I was able to dig up the actual differences between Logic Pro and Express. Here is the link: http://community.sonikmatter.com/forums/index.php?showtopic=37051
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Cool, thanks for that - yeah, it seems Logic Express is much closer to Logic Pro than it ever was in the past... previous versions had all kinds of stuff removed...
- 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thats what im starting to realizing, and thats a pretty cool fact. iI am just a low level hobby user anyway so it works out great for me. Do you think that you might be able to give me some directions on how to accomplish that remapping task since the actual programs are similar, and just the extras are what is left out? Nobody has replied to my thread in the express forum yet. If you dont have time I understand as well. Thanks.
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, no probs.
As I asked before: Is the DTX your only MIDI input device? Or are you using other MIDI keyboards with Logic as well?
How do you have the DTX configured in Logic? For instance, when you want to record a MIDI performance in Logic, what tracks/instruments are you recording on? Are you using the DTX in MIDI local off mode?
- 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Heh. I missed that part of your post. Sorry bout that. Yeah the dtx is my only midi device connected right now. I have the dtxplorer's midi out connected directly to the midi in of my Echo AudioFire12. When recording I am using the Ultrabeat (Studio Tight Kit) software instrument. I just create a new software instrument track and select what ultrabeat kit I want from the library. Then I go to Environments->New Software Instrument->Then drag the cable to the software instrument track. That is all I have done. It is mapping the kick and snare wrong. I did find out that there isnt a way to change the actual notes on the dtxplorer.
I also have a M-audio axiom25 but I am just using that via usb for now. I just bought it the other day. Would you reccomend setting this up via midi instead?
thanks for your help. im new to logic but willing to learn.
- 0
Bee Jay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah the dtx is my only midi device connected right now
Ok, in that case I recommend doing it like this, because this keeps it invisible and simple to use... oh, hang on...
I also have a M-audio axiom25 but I am just using that via usb for now.
So your DTX is
not the only MIDI device. Ok, then we'll do it a different way, or at least have to modify the walkthru.Let's keep it simple for now. Open the environment window, and go to the CLick & Ports layer.
You should see two environment objects - the Physical Input object (where all your MIDI comes into Logic) and the Sequencer Thru object (the sequencer part of Logic). These objects should be cabled together, because by default we want incoming MIDI to be sent to the sequencer.
But this part of Logic lets us customise things, by adding MIDI input processing before the sequencer (one of the reasons why Logic is cool).
Now, because we have two incoming devices, we can't just remap
all incoming notes, otherwise your keyboard playing will
really suck... 🙂Both MIDI ports (the Echo, and the Axion) should be listed in the Physical Input object, with the cable coming from the "SUM" output (this is the sum of all MIDI interfaces).
Disconnect the SUM cable. Connect a cable from the Axiom output to the sequencer thru (so all MIDI data coming from the Axiom gets passed through unaltered).
Select New -> Mapped Instrument. Name it "DTX Remap" or something.
Cable the Echo output of the Physical Input object to this new mapped instrument, and then cable the output of the mapped instrument to the Sequencer Thru.
Now, all MIDI events coming from the Echo (which the DTX MIDI is coming in on) are getting passed through the mapped instrument object, before being passed into the sequencer.
Now, double click on the mapped instrument to open it's window. You can now remap each input note to any output note.
Note - there are other ways of setting this up (there are often many ways to do things in Logic). The benefit of this way is that your mapped notes are recorded into the sequencer, so they will always play your other instruments according to the mapping you've set up, and you don't have to do anything else in the arrange page - just select your destination audio instrument (or whatever) as you already do.
- 0
ttetzloff ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you very much. I greatly appreciate it. I will try this as soon as I get home from work.
-Tyler