Benches Uncategorized

5

HELP! I think I damaged my computer....

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

This is going to be posted in the G5 Power Mac section too....

Hi everyone. Is it possible to damage just the left (or right) channel on the stereo out? I still don't have an audio interface yet, so I've been using the stock headphone jack for my headphones, and the stock speaker out for my Creature Speakers. They are both quieter on the left side. I think this has been happening for a couple of months, I just thought I was losing my hearing a bit on the left side, especially with headphones on. Turns out I'm OK, it's the stereo outs that aren't working right.

I found out that it's not me when I plugged in my active monitors, KRK Rokit 8s, and tried both speakers in iTunes, Garageband and Logic Pro. I played with the panning in both GB and LP, but the speakers on the left weren't as physically active/vibrating as much as the right. I did switch the inputs on the KRKs to make sure it was the channel and not the speakers.

The left channel isn't gone mind you, it just sounds quieter, more muffled with less high end. Maybe even a little distorted. I didn't want to turn it up to high to see if I could hear distortion clearly just in case.

I'm really really hoping that this isn't a hardware issue (I know that there's a 95% chance it is). I'm really hoping that there is a small preference or utility app that can control the panning of the systems output and I just don't know about it. I'm still holding out hope for that.

But if there's no hope and it is a hardware issue, any suggestions on what I should do?

Thanks for your time and sorry for the long thread. I look forward to hearing from all you geniuses.
X

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    It sounds as if the amplifier chip for one of the sides is not good anymore. This can happen when you plug in and out a lot.

    After you have it repaired, consider getting a small 1/8" extension, say 1 to 3 feet long, plug that into the mac, and then plug in an out of that instead. This way the Mac always knows the headphone out is analogue and plugged in, and won't crap out anymore.

    At work I have just such a setup, and so far, so good.

    Cheers

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Have you checked the panning in the system preferences/sound/output?

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the tips gents.

    It turns out that somehow, my Audio settings in Audio MIDI Setup had the left channel turned down.

    I haven't used that utility since I set up my tower almost 2 years ago! I have no idea how that happened.

    Any thoughts?

    X

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Drunk driving?

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The exact same thing has not happened to me but these days before I go and play live with my MBP I always go to System Preferences and check the sound out balance (if I use the stereo out) because it's happened several times that the setting is not centered although I have not touched it myself (nor has anyone else). I think it might be for instance iChat that changes it (silences the left speaker because the microphone is there) and then doesn't change back when voice/video chat ends (esp. when the software crashes). I'm glad your hardware is not damaged after all!