Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, My Canon IP4500 was working very well when I connected it directly to my imac. I just installed a Time Capsule and hooked the printer to this TC. When I go to install the printer on the TC, it says that there are no drivers on the TC. I tried the 4300 and 5000 drivers but they do not work. Any idea what I should do next.
Imported from the Apple Support Forums via the Wayback Machine 🔗
I found the solution. Go to the Canon web site and down load the newest Printer driver for the 4500.
PIXMA iP4500 Printer Driver Ver. 10.1.2.0 (Mac OS X CUPS) Driver Software
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, related to this thread, I was wondering if anyone has similar problem to me, when I connect the ip4500 to the USB on the TC it does not appear to recognize it. The printers section shows "USB Printers : None" as though nothing is connected at all. I've tried turning both the printer and the TC off and on again as some sites recommend but the ip4500 is never recognized. To check the USB port on the TC i plugged an older i560 in to the TC and it shows it no problem. To check the ip4500 I've plugged directly into a computer and it works fine. Is there anyway to run a diagnostic on the TC USB port to see what if anything is going on when the TC and the ip4500 are plugged together? Many Thanks
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Turns out the problem stems from the USB cable length, put the ip4500 on a 3m cable to the TC and it is recognised, put it on a 5m cable and it is not. The printer works fine on a 5m cable when connected directly to a macbook so it seems the TC is more sensitive to USB cable length than a macbook, not sure why this would be the case though