Imported from the Apple Support Forums via the Wayback Machine 🔗
if you run sysctl -a, you should get all the cpuid information in some form or another. The stepping in particular is reported as machdep.cpu.stepping. All the machdep.cpu.* keys appear (on my machine at least) to be the information the cpuid spits out. If you need anything else, you can always just write a simple program that issues the cpuid instruction/subfunction itself, and interpret the results as you need.
Hope this helps!
0
Steve Hoge·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm still poking around trying to figure out how to determine the stepping codes for my Woodcrest Xeon 5130 CPU (ie, a " 2GHz Dual-Core Intel Xeon"), since it wasn't enough of a priority to install Boot Camp to run Intel's bootable version of the CPU ID tool.
Anyone out there that has a low-level CPU ID tool that will run directly under MacOS or on the ? Is there a hook available in the EFI that would expose this information?
0
Steve Hoge·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks.
Digging into the output from ioreg(1) indicated that the Hardware Monitor application from http://www.bresink.de is able to access this info, a 16-bit value which it calls "CPUSignature".
So when Hardware Monitor's "System Information" window is enabled and "More Info..." is selected, the Family/Model/Stepping values are shown; concatenating these as hex nibbles yields the more familiar CPUID value used by references like this. From there the standard Intel S-spec values can be deduced.
0
orangekay·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If it's not in the IORegistry then you probably can't read it.