Imported from the Apple Support Forums via the Wayback Machine 🔗
I am using Vista Business 64 bit. I downloaded the Airport Utility and Bonjour setup tool. I connect to the internet flawlessly and the Bonjour program found my HP LaserJet 1300 printer and set it up as the default. But every time I try to print it doesn't work. If I plug my printer into my laptop it prints fine. I have tried deleting the printer and setting it up again, resetting my Airport base station, multiple restarts, etc... all to no avail. Anyone know how I can get the LaserJet to print over my wireless network?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Plug the AX into your computer with ethernet cable.
Plug the printer into the USB port on the AX.
Turn on your printer.
Run Bonjour
Print a sample through to the printer.
Disconnect your computer.
Try to print a job.
If this doesn't work, then you should do a Reset of the Airport with a paperclip and try again.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Tried your suggestion but no joy. It still wont work. Funny thing is that it worked fine before I did a clean re-install of Windows. Can't figure out what's different this time around.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
1. Make sure the printer is recognised by the base station. 2. Select 'Add a new printer' in Windows 3. Select 'Local Printer' in the dialog box (auto detect and install should be off), click next. 4. Choose 'Create a new port' and "Standard TCP/IP Port'. Click next. 5. For the printer IP address, enter the address of the base station 10.0.1.1. The port name will be filled automatically. Click next. 6. For the device type, choose 'Hewlet Packard Jet Direct', then click Finish. Choose your printer from the list and follow the rest of the prompts to install and configure the driver
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗