Benches Uncategorized

6

Digital Audio w/Logitech Z-5500

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Try as I might, I can't seem to get any digital audio out of the Mac Mini to my Logitech Z-5500 speaker system. I don't have the same problem with analog audio, just digital. It is my understanding that the combination of digital out directly from the Mini and the decoding built-in the Logitech should work ... maybe I am being a bit optimistic.

My current configuration is that I have the Mini connected directly to the Z-5500 control panel with a TOSLINK cable with the appropriate 3.5 mm adapter which I got from the Apple Store.

Here's what I tried so far with no success:
o Played several store-purchased DVDs, with known Digital Dolby and/or DTS audio tracks via Apple's DVD Player. I have also verified that the DVD Player was configured to use the "Digital Out - Built-in Output" setting for Audio output. The Z-5500 control panel shows a "No Digital Data" message. (To verify that the DVDs were good, I also played them from a Vista PC that was connected to the same Z-5500 speakers -- no problem.)

o Played music/movie sources from iTunes, knowing that I would be exercising QuickTime for audio output. Knowing that QT doesn't support digital natively, I have installed Perian. Within Perian, I have tried all the Audio Output options (Stereo, Dolby Pro Logic, Dolby Pro Logic II, & Multi-Channel). Still getting the "No Digital Data" message.

o Next I tried reconfiguring the Audio Output setting in Audio MIDI Setup. I verified the Source was set for Digital Out, and tried each of the Format combinations that were available. Still getting the "No Digital Data" message.

o Finally, I tried the com.cod3r.a52codec.plist "hack," creating a new variable named "attemptPassthrough" and setting is value to "1." Same message.

So, I must be missing something and can certainly appreciate any words of wisdom from anyone with similar experiences with the Mini and the Z-5500.

Thanks in advance.

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Tesserax-

    Have you verified that the TosLink cable is good?

    Luck-

    -DP

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for replying. Yes I did. Actually I have two identical cables that I got from the Apple Store. I swapped both just to be sure and verified that both worked when connected between my Vista PC and the Z-5500 control panel. When connected to the Mini, I can see the "red light" at the end of the cable (the end that is being plugged into the Z-5500). It's been a bit perplexing to say the least.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Wasn't trying to be too simplistic in my approach but I do know many folks have had problems with those cables. Red light is good.

    It's early so I am gonna throw some stuff at ya and I apologize in advance for any repeats.

    So the PC can play audio through those speakers? That's a clue. Can you see the settings that PC is using to talk?

    Did you look at the "Configure Speakers" button in Audio Midi Setup to verify that it is configured for multi-channel output?

    Are those cables Apple branded? Something about the length of the mini-plug on some brands IIRC.

    I'll keep churning-

    -DP

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No problems. Any/all advice is truly appreciated.

    So the PC can play audio through those speakers? That's a clue. Can you see the settings that PC is using to talk?

    Yes, the PC can play any audio source (games, DVDs, Media Player, etc.) digitally to these speakers. The primary difference that I can think of is the PC employs a Creative Xi-Fi Fatal1ty Platinum PCI card which is Dolby Digital Live capable for encoding whereas I am using the encoder(s) (DVD player, Perian, etc.) on the Mini.

    Did you look at the "Configure Speakers" button in Audio Midi Setup to verify that it is configured for multi-channel output?

    Hmm, you may be onto something here. Yes, I did check to see that the Audio Output was set for Encoded Digital, but I didn't confirm multi-channel under Configure Speakers. Selecting this option and going to the Multichannel tab will only allow me to select "Stereo." All the other selections are grayed-out. In addition, when I do select "Encoded Digital" for Audio Output Format, both the Default & System Output windows display "Unknown device" instead of "Built-in Output."

    Are those cables Apple branded? Something about the length of the mini-plug on some brands IIRC.

    I believe so. I did get them directly from the online Apple Store. They're approximately 3' in length and off-white in color. Part number on the Packing List was given as: TL955LL/A and their description was: XTREMEMAC TOSLINK OPTICAL AUDIOACCS

    Thanks again!

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Problem solved by replacing XTREMEMAC TOSlink optical cable (Part# TL955LL/A) with the Monster TOSlink cable provided in the Express Stereo Connection Kit (Part# M9573LL/A).

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Tesserax-

    Imagine that :-)

    Thanks for the update-

    -DP