Imported from the Apple Support Forums via the Wayback Machine 🔗
I recently bought a new digital camera (Panasonic Lumix DMC-FZ8), and have since had problems transferring the images to my Mac -- images are corrupted (typically broken up, with strange colour banding), occasionally don't transfer at all and just get an error message about file being corrupted.
I would normally have thought the problem was with the camera, but it works fine on a Windows laptop. I have tried all of the following, but the problem persists: -- importing into iPhoto -- dragging files to hard disk from sD card -- reformatting sD card -- using camera internal memory -- loading images to Windows laptop, then to USB flash drive, then to Mac (using every different USB port I have available).
Imported from the Apple Support Forums via the Wayback Machine 🔗
Some of the software that comes with the camera doesn't seem to be compatible with Mac.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't think that is where the problem lies: I haven't installed any of the software that came with the camera (either on my Mac or on a Windows machine). Also the corruption is inconsistent: it affects some files at some times when I try to transfer, but not in the same way when I try a second time (eg if I restart my Mac). I wonder if it is either a USB-related problem, or perhaps some corrupt pref or system file.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
My first thought was "USB connection". I have a couple thoughts.
1) Have you tried attaching the camera straight to a USB port? 2) Have you tried using a powered hub (setting the hub to use A/C power), and then attaching the camera to it? 3) Is the camera USB-2 and the ports on your Mac USB-1?
My bet is that either the camera is exceeding the USB voltage for the port, thus corrupting the data transmission, or the camera is sending the files too quickly and some of the data is being lost, due to the camera being USB-2 and the ports being USB-1.
HTH, ~FifthWheel
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
FifthWheel,
I think there is something in what you say, but I have tried a number of solutions along those lines -- I've tried attaching to camera to every USB port I have. And, as mentioned, I have also tried transferring the files to a Windows machine (which works fine), then to a USB flash drive, then plugging the flash drive into my Mac. I have had some success that way -- ie sometimes files transfer OK, sometimes not -- but I'd like to find a permanent, reliable solution!
Interestingly, I spoke to Panasonic support (who admitted they knew nothing about Macs -- no surprise there, then), and they suggested transferring the files one at a time, rather than all at once, which sounds like they were thinking along the same lines as you. But that didn't work either...
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok. Have you seen any other problems with the USB ports on your Mac? If your ports are bad or on the edge, you will see problems with other devices plugged into them. That you haven't suggests that something else is the problem.
Have you tried a different flash drive? If there's a problem with your flash drive, then any files you transfer from that flash drive will work only sometimes -- it won't just be pictures from your camera.
What USB speed is the camera and what speed are your ports?
HTH, ~Fifthwheel
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Many thanks: some good points there. The camera is USB2, I am sure.
I think the main USB2 port on my Mac (on the front) is perhaps a bit wobbly -- lately, occasionally drives etc don't show up when plugged in. But the only other USB2 is round the back -- hard to reach!
I have only tried the one flash drive, but haven't so far had problems with other files. However, definitely worth trying something else.
Perhaps it would be worth investing in a card reader, or maybe replacing the USB1.1 powered hub I have with a USB2 one?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Your easiest & cheapest way to transfer the camera pictures is to buy (about $10 - $20) a USB memory card reader. Just plug your camera's memory card into it & copy the pic files to your Mac. Quicker & easier than interfacing the camera for pic transfer.
Cheers, Tom
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think perhaps a card-reader is worth investing in. I have now had some success by using a USB extension lead (makes a firmer connection with the USB port and with the camera), though even then it seems to get upset if I try to transfer too many files in one go. And once it has transferred a file which has corrupted, it seems necessary to reboot before I can then try again.
But thanks to Texas Mac Man and FifthWheel for your suggestions.