Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, I have installed a copy of OSX on an external USB drive and I want to have the ability to boot to it on startup. Right now I have it partitioned as a Mac OSX Journaled with GUID partition map. However when i go to preferences, it still doesn't appear as an option in the startup disks options.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Can you boot to that volume with Startup Manager (hold down the option key while booting the computer)?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Nope, only the main HD shows up using that method.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Then, I suspect that USB HD doesn't support booting.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
No, I believe it's Tiger which doesn't support booting from USB; has to be Firewire.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Intel Macs support booting from USB.
JCross74 , how did you install OS X on this volume? With the installation DVD?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
As Király mentioned, you believe wrongly. Most non-ICBMs (Intel-chip-based Macs—i.e., PPCs) cannot boot via USB HDs—nothing to do with Tiger. All ICBMs can boot from bootable USB HDs.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I sit corrected!
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Some of those USB drives couldn't boot the Intel Macs if they:
1. Were being bus powered. Attach an A/C adapter to the said drive (of course impossible with an iPod).
2. Being connected into a USB port with a USB 1.1 device sharing that same bus. To figure out if a USB 1.1 device is sharing the same bus, go to Apple menu -> About This Mac -> More Info to open the System Profiler and check the USB hardware profile. It will tell you which devices and what speeds are attached to the bus. Moving USB 1.1 devices to their own bus usually solves the problem. The bus is all USB 2, if it is labelled high speed.
3. The firmware of the said USB drive is not up to date.