Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a Beta Sp master with continous TC.
I am looping my signals through my Sony DV deck in order to capture my Master onto FCS2.
-I have deselected the T break option in the user preferences -I have set a long clip length inthe system preferences panel -My drives are empty (new project) -This is my first project in FCS2 -I have tried putting a tape on the Sony DV deck and pressing record so that there is actually a tape and signal with TC coming from a tape. This does not seem to help. - I have tried other Dv tapes that I know are fine and which I am using to edit on my AVID and I know the tapes are not the issue
I do not get an eror message, instead a window reads: Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Are you using 'non-controllable device' in your device control preset?
K
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Kevan,
I am not because I need the TC reference.
If I select 'non-controllable device' the timecode window becomes inactive and I am not able to capture the TC for my clip.
You see, I will use my picture to export to DVD Pro to author a DVD with two language versions and having TC on the picture is crucial.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I could be mistaken, but unless you are connected directly to the source deck, I don't know that you can get TC from the source tape.
Are you able to control the Beta deck, while looping through the DV?
Post back and others may have better insight.
K
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The TC shows up fine inthe TC window on FCPS2.
This happens both when I insert an actual DV tape on my deck and when I loop the signal from my Beta SP (connecting TC out from Beta into TC in on DV deck and pressing record on the DV deck)
FC reads the TC both times but somehow the software is being fooled into thinking that the tape ends in a couple of seconds and so it stops capturing the clip.
I played the clips back and they do have TC and video and audio, only they are a second long.
Because I do not have in/out points set up and because I am using "capure now" option, I should be able to record the whole tape as long as I have room and my preferences are set correctly, right?
My sentiment is that there is some preference that I have not thought of that is causing this? I don't know what it is and I am not an experienced FC user.
Thanks for trying. Let me know if you think of anything else I might try.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Kevan is correct. There is no time code other than what FCP is generating as there is no timecode being sent from the DV deck (the device FCP believes it's working with) to the computer. In addition, there is no way to control the deck. It is an uncontrollable device.
Try capturing with uncontrollable settings and report back. If you want to capture DV with TC, dub to the DV tape, then capture.
good luck. x
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Studio X
I believe Kevan was asking how I was getting TC from the Beta. (See my reply above)
I do see the timecode in the DV deck when it is on record and also on the FC capture window, which means that it is coming through the DV firewire and into FC.
I just tried the uncontrolled deck option and this does not bring timecode into FC.
Regardless, I am unable to digitize ANY tape from the DV tape for more than a couple of seconds.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you dub the DigiBeta to DV, and with the DigiBeta deck turned off, can you capture the DV?
Can you capture it using log and capture?
Can you capture it using Capture Now?
Can you capture it using 'non-controllable' device?
If none of the above, you have a more basic problem.
Can you capture the DV tape using iMovie?
x
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Simply hooking the Beta deck VIDEO signal thru the DV deck, then the DV deck to the computer via firewire WILL NOT get you timecode from the beta deck. If you have a DV deck with TC IN and you send TC OUT from the beta deck, STILL you will not get TC from the beta deck. This won't work.
What you need to do is get RS-422 deck control of the beta deck...THAT will get you TC. You still loop the video thru the DV deck, but you get a Keyspan USB/Serial adapter and an RS-422 control cable and connect that to the beta deck. Then you set the FCP preferences to accept video in via firewire, and set Deck Control to RS-422/USB and you should be set.
Not sure how you are looping your signal (that is something you never went into detail about), but it obviously isn't working. And are you trying to say that you had this EXACT setup work on an Avid? You do know that FCP isn't and Avid, right? They do things differently.
Shane
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks, Shane.
I do have a RS-422 deck control on the beta deck. I also use the same control on my DV deck. I will try using it as you explainned.
In the meantime I read my DV deck manual (Sony DVCam DSR45-A) looking to see if maybe there was an answer to the problem that had to do with the deck. There were some menu issues, which I will post here for fuure refence for anyone who might try to do this. Once I adjusted the menu settings ont he deck, O was able to use the capture now option on FCP, but I could still not contro the deck or set in/out points, obviously.
I am curious as to why the TC looped from the Beta Sp wont be read by FCP (yes, I realize it is different that AVID) but I dont understand what it is about it that doesnt allow it to read timecode this way if technically it is being read and passes through it. Please enlighten me.