Benches Uncategorized

11

source for 128k/512k keyboard cable?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

found my old 128k in the garage, but the keyboard cable is missing. i remember it's not a standard phone cord...

thanks,

11 replies

Sign in or join Beachball Help to reply.

  1. 0

    Appaloosa mac man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    David,

    Take a closer look at an older phone. The handset is connected to the phone with a smaller plug than the wall plug. The original Macs used that size connector. Telecom contractor supply houses like Graybar still carry the old plugs and tools so you can still make your own.

    Otherwise, check with a computer recycler. They will have some old Mac resources available. Post back with the name of the largest city within 100 miles of where you live and we can probably find you a source of old Mac parts. Last week I found 400k floppy drives for $5 at one recycler. Stuff is out there if you look for the guys that tear the old stuff apart.

    Ji˜m

  2. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jim-

    If it uses standard handset connectors, why can't you use a standard coiled handset cord? Is it wired differently?

    If you could find a re-wireable handset in and out adapter that could be re-wired, could you use that? (I am thinking of a handset "spinning" connector that keeps your coiled handset cord from getting too tangled, do you know what I mean?)

  3. 0

    Jeff

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    For symmetry and uniformity of manufacture, a telephone cable jacket is inserted into the modular plug identically at both ends. This reverses the order (left-to-right) of the individual conductors in the plugs, so that one mirrors the other. The jacks mounted on the phone base are reverse-wired to compensate for this, and correct the conductor order. You can make both plugs match, by inserting one end of the flat cable "upside down" into a modular plug, before crimping. Of greater concern is the quality of the individual wires/copper strands used in telephone handset and line cords - which is marginal at best, not to mention the absence of shielding. Those tangle-free adapters aren't serviceable, since their internal conductors consist of "hard" wires.

  4. 0

    Texas Mac Man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can join LEM-Swap for buying & selling Mac stuff.
    http://groups.google.com/group/lemswap

    After you join, post a WTB (want to buy) & you'll probably get multiple offers.

     Cheers, Tom 😉

  5. 0

    Appaloosa mac man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Grant,

    David and Jeff both gave some good cautionary information. None of the answers so far have been definitive, totally accurate or complete. Here is the wiring of both.

    A phone hand set is wired as follows:

    If you hold BOTH plugs facing you with with the gold contacts up, and if the black wire is to the left on one plug, it will be on the right side of the other plug. So, facing one plug the wires will be

    black, red, green, yellow

    and facing the other plug will be

    yellow, green, red, black.

    Thinking of the phone cable as a 100 yard dash, black will be the inside lane, red will be the second lane, green will be the third lane and yellow will be the outside lane.

    Jeff is correct in saying

    "The jacks mounted on the phone base are reverse-wired to compensate for this, and correct the conductor order." That speaks to the sockets.

    The color sequence on the Mac keyboard cable with the gold contacts up is

    Yellow on the left, then green, then red, then black on the right for BOTH ends.

    David,

    For all the partial information provided in this post, I stand by my first response.

    "The original Macs used that size connector." Only the size of the connector is the same. The wiring is not the same. Therefor, the second comment was:
    "Telecom contractor supply houses like Graybar still carry the old plugs (with gold contacts) and tools so you can still make your own." Jeff is correct in saying that flipping the plug over will give you the alternative wiring. You will not want to for the Mac cable, however.

    To summarize, to make your own Mac keyboard cable, you want to insert the yellow lead into the inverted plug with the yellow wire to the left for BOTH ends.

    As you indicated, a phone handset cable is wired differently. It is wired with the plug right side up on one end and up side down on the other. It is not quite like a crossover cable where the pin assignments are altered, not just inverted.

    As for frying the port, that is unlikely. The first mice and keyboards for Macs and PCs used a VERY low voltage signal. When Apple invented the Apple Desktop Bus, they intentionally added a higher voltage line in the keyboard and mouse wires to accommodate some wonderful data acquisition devices and LEDs, etc. on input devices. Plugging in those ADB devices is where you can fry ports if the computer is on.

    The best example is in Windows 98. If you start up without a mouse or keyboard, it will declare a keyboard error or mouse error. It will then advise you that if you have a generation one serial mouse, you may plug it in at any time. If you have a newer mouse (namely an ADB knockoff plug with a vertical registration pin instead of the Apple ADB horizontal pin) Windows 98 warns you to shut down and only plug in the mouse or keyboard while the computer is off.

    Hope this clarifies the situation.

    Ji˜m

  6. 0

    Jeff

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "
    The color sequence on the Mac keyboard cable with the gold contacts up is
    Yellow on the left, then green, then red, then black on the right for BOTH ends.
    Jeff is correct in saying that flipping the plug over will give you the alternative wiring. You will not want to for the Mac cable, however.
    "

    In order to have the conductor color schemes match at each modular plug (gold contacts up), one end of the cable is inserted upside down into the plug (compared to the other). You're not really inverting the plug, because the orientation of the crimping tool (whether hand-held or bench-mounted) typically remains the same. You invert the cable, before inserting it into the plug for crimping.

    "
    As you indicated, a phone handset cable is wired differently. It is wired with the plug right side up on one end and up side down on the other."

    Actually, handset cords are manufactured identically as line cords. The same side of the cable jacket faces up when inserted into the modular plug (gold contacts up and release clips down). As with the line cords, this causes the wiring color scheme at one modular plug to be the reverse of the other plug. In a modular handset plug, the two receiver conductors occupy the adjacent middle pins, while the transmitter leads are on the outside pins. Reversing the conductor scheme causes no problem, because the receiver and transmitter conductors always occupy the same relative positions in the plug - the inner pair and outer pair of pins respectively. The polarity correction that was incorporated into the phone's internal modular line jack was one of necessity. The older Western Electric Touch-Tone telephones required correct line polarity, because if tip and ring were reversed, the dial tone would not be broken when any buttons were pressed on the keypad.

  7. 0

    Appaloosa mac man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jeff,

    Good points all around. I forgot to mention that the first test I made was to try the keyboard cable on the phone. It worked just fine because phones do not care about wiring polarity, just pairs of wires - except, as you said, early touch tone phones. If you reversed the wires while punching the leads into a block, when you went to dial, you would hear the dial tone but pressing the buttons would result in a 'thud' sound instead of a distinctive tone. But, to be totally precise, that was because of trading wires in the wall jack, which required only two leads -or one pair of wires- while handsets require two pair of wires for four leads. Now if we look at the wiring of trim line phones with the touch pad in the handset, we have another set of conditions and requirements!

    Jim

    Oh, and BTW, I sometimes hold the crimping tool in my left hand which means the tool is then upside down and the plug is inverted! : )

  8. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you Jeff and Jim!

    This confirms my theory that all modular telephone cords are their own sort of "cross-over cables".

    If you buy the little connector that allows you to chain two lead-in cords together, it is also wired with the comparable wire-swapping to keep the wires going the right way throughout.

    I took a look in the old "Inside Macintosh". Volume III has the Mac Plus Hardware interfaces broken out, and it confirms that they used the (cheap and readily available) handset cord connector, but the text clearly indicates that "both the Mac connector and the keyboard connector are wired identically, so here is the diagram for both."

    That seems like exactly what a digital logic designer would do (make both the same, thinking that was simpler) but it is clearly NOT what Western Electric decided to do when they designed the modular jack telephone wiring system.

  9. 0

    Jeff

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "
    If you buy the little connector that allows you to chain two lead-in cords together, it is also wired with the comparable wire-swapping to keep the wires going the right way throughout."

    You'd think (and hope) so, but I've often found that the made-in-China products packaged/sold by so many mainstream USA companies don't maintain proper polarity. The inline modular couplers are hit and miss regarding polarity - some are manufactured correctly, while others are not. Because telephone devices today aren't polarity-sensitive, the effect of these couplers goes unnoticed. Reversing the order of the conductors from left-to-right doesn't change the line's relative positions: L1 occupies the center two pins, while L2 occupies the outer pins on a 2-line RJ-11 plug. A 3-line RJ-11 plug places the third line on the additional, outermost pins.

  10. 0

    Appaloosa mac man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've made friends with a guy who deals in used electrical equipment that has been removed from old buildings. He gives me the wall plates that have punch down connectors that allow for custom wiring. Apple history and early computing hardware concepts came out of the telecom industry. Fun stuff to explore.

    So David,

    I hope this bit of overkill gets you a working Mac keyboard!

  11. 0

    David Hendrickson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    it was my understanding that it doesn't use standard handset cords, that two of the wires are reversed and if you do try a standard handset cord you can fry the port...