Benches / Printing and scanning
USB printer recognized but won't print
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just purchased a new HP Deskjet F4280 printer that is USB connected to my 802.11g Extreme base station. I have 2 computers, a MacBook Pro and G4 Mini. The mini is hardwired to the Extreme via the LAN and prints fine on the HP printer. The MBPro doesn't print over wireless. When the USB is connected directly to the MBPro it prints fine. I've reconfigured the Extreme to no avail. What can I do to get it to print
15 replies
Sign in or join Beachball Help to reply.
- 0
johanasks ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem over here. Printer will prin when connected directly to imac, but when disconnected and reconnect to Airport Extreme n, the Airport Exterme config will show the printer, but it will not work. The strange thing is that when looking in fax/print settings the priner still is located to the imac intead of the airport ? Help ?
- 0
Bob Timmons ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You need to have your printer located at the Airport Extreme.
Open System Preferences, then open Print & Fax
Click the "+" button to select your printer from the list
Click the Add buttonNow, it will appear that you have the same printer installed twice. A closer look will reveal that you have a printer located at your iMac and you have a printer located at the Airport Extreme.
Give it a try and post back.
- 0
1Cyborg1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Many times when a printer WILL print when connected directly to usb and will NOT print when connected via the airport is because the drivers included with OS X are 'incomplete.'
What I mean when I say incomplete is that they are designed to work specifically with a direct USB connection, and are not at all designed to work via the airport. So the only fix, then, is to get drivers that do.
Here's a site that supports MANY printers via the airport that Apple missed:
First, check to see if your printer model is listed as supported-
http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#PrintersIf your printer is listed, download and install these three packages in the order below:
http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
http://www.openprinting.org/download/printdriver/macosx/gplgs-8.63-ub.dmg
http://www.openprinting.org/download/printdriver/macosx/hpijs-2.8.12-ub.dmgAfter all three packages are installed, add your printer via the printer configuration utility normally (it should be listed as a bonjour printer under the normal tab)
Mac OS X will search for the newly installed driver, and if everything goes well, will automatically pick the best one for you to use. The driver should have 'hpijs' at the end of it, which is one of the drivers you just installed.
Many people don't know that OS X supports printing via the Airport with the more popular printers. If you just got a brand new one and my solution doesn't work your only bet may be to wait until Apple releases new drivers for your printer.
Good luck!
- 0
Christa Diercksen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Had same problem, after upgrading to Leopard and lost my Airport Utility and had to reinstall it manually. Thank you Bob for this response because after countless frustrating hours, your solution of looking at the "2 printers" in the Printer & Fax section of my preferences fixed the issue for me and I can now happily wirelessly print again. Thank you even though you were helping somebody else--it saved me too!
Christy
- 0
asmartin88 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Any reason why the 2nd (8.63) & 3rd (2.8.12) links don't work?
Not Found
The requested URL /download/printdriver/macosx/gplgs-8.63-ub.dmg was not found on this server.Not Found
The requested URL /download/printdriver/macosx/hpijs-2.8.12-ub.dmg was not found on this server.Thanx
- 0
Karyn Da Costa ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just ditched my Lexmark Wifi because of unfixable network problems, tried everything imaginable. Bought an HP F4280 and Airport Express and no matter how I tweaked it, it the Macbook would recognise the printer, as did Airport, but it would not print. Just followed your advice and it's working. I'm a happy bunny now. Thanks Bob. :o)
- 0
em_unwired ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes, thank you - problem solved.
I was having the problem where the Extreme was recognizing the USB printer (an Epson Stylus Photo R1800) but when I tried printing the print job would vanish - didn't even show up in the print queue, and my MB acted as if the job had printed. I deleted the printer from the list and discovered it again in the list in the "print and fax" window in system preferences. After that it worked fine. Didn't have to download new printer drivers. - 0
JasA440 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'll add my thanks to the list. So logical, and yet so undocumented (ahem, Apple). Mark this question 'answered' please.
- 0
M Franco ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Bump... Im having the same problem. I just purchased an Epson printer to replace my hp that did work wirelessly, but the epson doesn't...
- 0
PMSKOL ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
After many struggles to try and troubleshoot this issue, I was able to finally get my LaserJet 3050 to work with the AirportExpress. Many thanks for this extremely valuable information.
- 0
Edwardoc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Was having same problems as those above. Getting a fatal error. No Communication. Your guidance did the trick. They don't mention this in any of the apple literature. Thanks a lot for your post
- 0
holeinhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am trying your suggestion. Print and Fax tells me the printer is located in Time Capsule. Should I connect it to the computer and Add?
- 0
MrENGLISH™ ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for sharing this! Finally got my printer to work with AirPort!
- 0
Bob Timmons ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry for the tardy response.
If you want to print with the printer connected to the Time Capsule, add the printer at that location.
- 0
MacSandy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Bob Timmons reply on this worked for me. I installed the printer again, just as he suggested, and . . . lo and behold. . . Success! Thank you Bob.
Sandy