Imported from the Apple Support Forums via the Wayback Machine 🔗
I've been using iWork for some time, currently on iWork 09. I have created a brochure with one of the Pages templates and it looks great.
However, when I print, the right side of the page is short by about one-half inch. Onscreen it looks perfect, but when printed, that one-half inch is not printing. On the left-hand side of the page, the margin is 1/4", but the right is about 1/2". What results is that the brochure looks like it's too far to the left.
I've tried everything I can think of. I've also tried "shrink to fit page" but to no avail.
Imported from the Apple Support Forums via the Wayback Machine 🔗
If I understand well, you are using an horizontal format (landscape).
Many printers are unable to print on a wider margin at bottom of pages. This bottom becomes the right of the page when we use the landscape format.
It would be useful to check that you are using the print driver matching your printer requirements.
Maybe you are using a print driver dedicated to a printer able to print with no margins.
Yvan KOENIG (VALLAURIS, France) mardi 29 juin 2010 20:53:29
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I would wager you're using an HP. Many HP models will not print the last half inch. The only solution in this case is a new printer.
Walt
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Walt K wrote: I would wager you're using an HP. Many HP models will not print the last half inch. The only solution in this case is a new printer.
The epson printers which I used behaved this way too.
Yvan KOENIG (VALLAURIS, France) mardi 29 juin 2010 23:11:59
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Rachel,
Before you do anything else, select View > Show Layout. If there is a grey border around your layout, you have a non-printing area being requested by your printer driver.
In the Document Inspector, Document Tab, click Page Setup and under Paper Size, look for a border-less 8.5 X 11 option. If you are lucky your printer will have this option. My HP printer does.
With border-less selected, your gray margin should disappear and you should be able to print to the paper's edge.
Jerry
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks to all of you. Each of you provided excellent suggestions, however, none has worked with this - as you guessed - HP printer.
Interestingly, there is a "borderless" print option when I go to print, but it's greyed out, saying it's not available with the paper size (regular 8 1/2" x 11" paper that the Pages brochure template uses. I've looked to see if my printer has the borderless version, but it doesn't.
Well, I guess I'll live with the right side not printing the right-edge part of the brochure's colours.
Thanks again.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Do you have an user guide or manual for your HP printer? Have a look and see what it says about borderless printing. By the way which printer model do you have?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the suggestion. However, I've checked the manual and there is no option for borderless printing, except for photographs. I have the HP psc 1350 All-in-one printer.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry to hear.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
fruhulda, Walt, Yvan...
So I tested printing to the edges with my model 5150 HP printer (obsolete) to see if it really works in the 8.5 X 11 border-less mode. It does print to the edge, but I discovered that it overscans, to borrow a TV term, and prints roughly one 12 pt. character over the edge on all four sides. That is to say that about an eighth of an inch of content will be lost over the edge all the way around. That may be a problem for some, and not for others.
Jerry
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Jerry,
Enlarging the content is how borderless works. I should have mentioned that in my earliest post. The amount of enlargement is usually adjustable somewhere in the printer dialogs. Set to the minimum it might work satisfactorily with that particular brochure. Of course, in this case it's not available in the OP's printer. I had an HP once and I had to learn to live with it.
Walt
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Walt,
I thought after posting that I should have mentioned that we shouldn't be surprised about the overscan because the driver must assure that the content never falls short of the edge by allowing for some misalignment. I wouldn't have guessed the amount lost would be quite that much, but the engineers had to pick a number. I know that when printing photos on 4X6 border-less that I have to be careful not to lose significant parts of the image.