Benches / Printing and scanning
Communication Error with Canon MP560: Apple Support Communities
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, it took me weeks about 4 months ago to get my printer set up to work wirelessly. It has been fine ever since but tonight I am trying to print a PDF file and sometimes the printer will print 1-2 inches of the page (very slowly), once it even printed 3/4 of the page before stopping...then gives "A communication error has occurred. Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered on, and properly connected to your computer. Then try printing again." Any ideas what is going on? Of course it is connected because it prints part of the pages. Queue Name: CanonMP560_series_3ADD850000001; Driver Version: 10.26.1.0; I tried printing an email to be sure it wasn't the document and the email only printed about 1" also and then quit with same error. It took me forever to get this set up correctly and worked beautifully for 4 months and I have changed nothing on my computer. Any ideas what is causing this? I am not techy so all help is so appreciated. Can supply any info you may need but be specific as to where I can get that from. Thanks and hopefully I can get some help!
10 replies
Sign in or join Beachball Help to reply.
- 0
CMCSK ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you tried repairing permissions and then restart? Can you tell us what you have done in an attempt to correct your printer issue?
Have you visited Canon's website to determine if you need to update its drivers for Snow Leopard.It's possible you need to update Snow Leopard to 10.6.2
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello Gary,
Your symptom has been mentioned previously in this forum. I cannot remember exactly if anyone managed to resolve the issue but I think the problem is related to wireless stability.
To test this theory, you could connect the printer temporarily directly to the USB port of the Mac. If the previous USB printer was removed, then connecting it to the Mac will automatically create a new printer queue for you.
With this USB printer queue, try printing the same document. If it prints the complete document without any loss then you have narrowed down the cause to being the wireless connection rather than the driver itself.
That said, checking the Canon Australia web site, there is a new v10.30.3.0 driver for the MP560. I am not sure if they have provided this driver to Apple as yet so that it is part of Software Update.
So, here's a link directly to the driver;
http://support-au.canon.com.au/contents/AU/EN/0100205802.html
You should be able to install this with the existing printer queues still on the Mac. After you complete the installation, if you check the printer queue, by selecting the printer in the Print & Fax list and then pressing Options & Supplies > General, the driver version should show 10.30.3.0.
Also on the web site, there is another "driver" that is supposed to assist with network printing. This is called the MP Driver v1.0, and it states that the actual printer driver has to be installed before this is installed - suggesting that it is an update rather than an actual driver. Here is a link;
http://support-au.canon.com.au/contents/AU/EN/0100234501.html
See how these two updates go. Reply if needed...
Pahu
- 0
Gary Schnetter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've repaired permissions twice, restarted computer, made sure have latest software per next response. I have updated to 10.6.2, sorry, just forgot to change that on this listing. No matter what I do it prints (usually 1-2" of the page) and then quits with error message. I printed a bunch of pages with no problem one week ago, no computer updates between, no new software, absolutely no changes at all. Have only done the basics of troubleshooting because I am no techy and don't know what to do except permissions repair, restarting, making sure software is updated. But I can't understand why this would change all of a sudden. Thanks for the response and I do appreciate any help!!!
- 0
Gary Schnetter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Pahu...You helped me a lot when I set this up wirelessly. I just can't understand why this worked perfect a week ago and no changes, etc., and now only prints 1-2" and errors out and ejects paper. I updated my software with no problems and then tried the 1.0 network update and don't know about that...it was weird the way it came up behind and I had to search to find the set-up, then said installed software but asked if configured and I said yes and then searched for printer and couldn't find it (is on and had just tried printing before that). So went back to Help and started going through this long set-up and I said "no" and x-ed out of that. Went to print again and same issue - printed 1-2" and errored out. I do have 2 printers to select from. I know one is with the old software which I can tell because I followed your instructions about the Options/Supplies. I am selecting the one that shows the new software. Don't know how to delete one of the Printers, or maybe I need to get rid of them all and redo that??? I am just so ignorant about wireless or most technical stuff...sorry. Where should I begin now? Is it a real pain to just go USB? I can't stand setting this up, but if not too hard to do and if that will work would probably be best. This wireless stuff is way over my head I guess. Let me know what you think I should do next...and thanks for being so great about assisting people!
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Gary Schnetter wrote:
Pahu...You helped me a lot when I set this up wirelessly. I just can't understand why this worked perfect a week ago and no changes, etc., and now only prints 1-2" and errors out and ejects paper.I'm not sure either. If you have Software Update set to run automatically, then there was an Airport Client Update 2009-002 in December. But apart from that, I cannot see any recent update that could have been applied that would have stopped this from working.
I think there could be other factors, not related to the Mac, that could be causing the issue. Have you added any other devices to your wireless network recently? Or has the location of the printer moved compared to last week? Or has something like a piece of furniture been placed between the printer and the wireless router?
I updated my software with no problems and then tried the 1.0 network update and don't know about that...it was weird the way it came up behind and I had to search to find the set-up, then said installed software but asked if configured and I said yes and then searched for printer and couldn't find it (is on and had just tried printing before that). So went back to Help and started going through this long set-up and I said "no" and x-ed out of that.
I've never used that MP Driver v1.0 install myself. My MP980 installed fine and has kept working on wireless without no loss of connection. So I don't know what you should have seen during its installation. It certainly doesn't sound like it worked correctly. But note that it is an add-on to the Canon v10.xx driver - not a full driver itself. So the Canon 'CUPS' driver would have needed to be installed and working for the MP Driver to complete its installation.
Went to print again and same issue - printed 1-2" and errored out. I do have 2 printers to select from. I know one is with the old software which I can tell because I followed your instructions about the Options/Supplies. I am selecting the one that shows the new software. Don't know how to delete one of the Printers, or maybe I need to get rid of them all and redo that???
It is interesting that only one of the drivers appears to have updated to the latest version. I would have expected both to have updated to the latest version (assuming that both are the printer queues for the MP560, as opposed to one being the scanner queue and the other being the printer queue).
At this stage I suggest we sort of start again and reset the printing system (Control-click in the Printers list and select Reset..). This will remove all printer queues but not the associated printer drivers.
With both printer queues removed from the Printers list, restart the Mac and then add the network printer again. Remember that when you add the network printer, it can take several seconds for the printer displayed as 'canonijnetwork' to appear.
Is it a real pain to just go USB? I can't stand setting this up, but if not too hard to do and if that will work would probably be best. This wireless stuff is way over my head I guess.
The USB connection is usually a sinch to configure. And if this new network printer queue still fails then it is worth trying the USB printing - even if just to prove that you can print a whole page.
If you just connect the MP560 to the Mac via USB cable, the printer will automatically add to the Printers list. You should not need to do anything additional to get it connected and working.
Let me know how it goes and reply if needed.
Pahu
- 0
CMCSK ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
and now only prints 1-2" and errors out and ejects paper.
Which browser are you printing from? Does this happen if you use another browser or print offline?
Try printing on a new account to see if you get the same issue.
Message was edited by: CMCSK
- 0
Gary Schnetter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you so much once again Pahu. You solved my issue. When I deleted the printers and then I restarted my computer, went back into the PDF I was trying to print and voila...it worked. Printed a web page and quark file also just to be sure was working with all and worked fine this time. Very, very strange but something happened but now it is working thanks to your suggestions. You are a wonderful person to be on here helping other people and I hope you know we do appreciate it! Thanks again, Gary
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Great to read that you got it working again Gary and thanks for the kind words (and the points). Guess we will never know what was the cause of the all the new trouble, but I guess you know have some actions you can try should it ever occur again....
And of course, post here if you need help.
Pahu
- 0
seb82 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Phau, you seem to have a lot of knowledge in getting this MP560 printer to start running.
I too have had it working wirelesly fine with no problems and no it has stopped working.
I initially had parallels on my Mac but read that it may cause interference with the printer so I removed Parallels and installed the printer and installed Parallels again. Somehow it worked fine for the first time. Then it stopped again and I had to open system preferences > remove the printer and add it again. It worked fine again for a few prints.
Now it has stopped working again and even though I remove the printer and add it again it will not print. It just stays in the queue.
Any support you can offer would be greatly appreciated!
Thanks,
Seb
- 0
kariv ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There has been problems when computers have bluetooth on....not sure if this helps?