Benches Printing and scanning

7

New Epson Stylus Photo PX710W will not work wir...

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi. I've been reading printer threads on here 'til I'm dizzy. So many people having almost the same problem ... finally though, Im going to have to post this new question. We just bought an Epson Stylus Photo PX710W wireless scanner/printer. The idea was for it to be accessible from ,y Mac Mini and my partner's Mac book, wirelessly. So, took it out of the box, studied the manuals and the installation instructions, then tried to follow them. The bottom line is that this printer works fine as long as its connected via a USB lead to one of our machines, but it will not work wirelessly. I must have been through the install process twenty times. The point of failure is always the same, however it is arrived at, whether the firewall is on or off, whether the printer system has just been reset or not, whether the USB lead is left plugged in or removed as prompted, whatever... At some point, the user is asked to confirm (or enter) the router's SSID and WEP key. It sends this info to the printer, and that's where the installation ends. Each time the error report says here is no connection to printer, asks "Is printer turned on?" (Doh!) "Is hub switched on?" (Doh! again). The printer is getting 'Excellent' signal from the hub. It's pretty annoying when a piece of kit like this is sold on the basis that it is compatible with Mac OS X, only for this claim to be completely undermined by reality.

I can see from other folk's questions that printers and Macs don't always get along, and I'm wondering, in my case, am I doing/not doing something (un-documented) which I should/ shouldn't? is this an Epson drop off or an Apple one?

Any info gratefully received, thanks

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, they have sorta turned Printing into Rocket Science lately it seems.

    I assume your Router is WEP? How long is the password?

    Did you retry adding the Printer after it got that info & Rest?

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi BDAqua, thanks for responding. I'm not in the same location as my printer at the mo so I can't try the exact fix you suggest, I will try it later tho.

    My router is a BT HomeHub and according to the booklet that came with it the security option to select when using it with a Mac is WEP (hex). So the password is a 10 char string which is a hex number. The printer came with an install disc and the install process on the disk can only be forced down one of two paths. In path A, the installer claims to have detected the SSID and WEP security settings automatically, it says "SSID=<name of hub>, security=WEP. Is this correct?". Well, it is correct, but the user can't inspect the WEP key so I don't know if it's using the 10 digit hex value or whether it's preceeding that with a $. If I accept then its the end of the line. It "sends config to printer" and then hangs until it fails. If I don't accept that installer has detected settings correctly, I can enter my own. The installer forces a 10 digit hex entry, there's no option of preceeding it with a $. It then goes on to fail in the same way

    it's been suggested I try to install as an IP printer, I'll revisit this thread later. Thanks.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The printer has now been fully configured and is working with all the Macs in its domain.

    I still don't understand why I was unable to install and configure the printer from the Macbook. Having failed to do that, I moved the printer into USB reach of my Mac Mini and went through the install procedure. It worked first time!

    What I have found is that the Epson printer appears twice in the Printer List, once as a USB printer and once as a Bonjour printer. I made the Bonjour printer the default, and now I can print wirelessly without problem.

    Adding the new Bonjour printer to the Macbook was simple, that Mac now prints wirelessly without problem too.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Great to hear thanks for the report!

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello there!
    I have the exact same problems you had when I try to install the printer to a wireless network. The printer is already set up and working wirelessly with a PC and now I want to add my MacBook. I do everything the Installer suggests but when I 'm told to unplug the USB cable (supposedly because it's no longer necessary), I then lose all communication between the MacBook and the printer. Any advice?
    Thank you in advance!

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi pele-mele, and a warm welcome to the forums!

    I think you'll have remove the USB instance of the Printer and Add it again in Print & Fax.

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you for the warm welcome BDaqua, as well as for the immediate response. I am actually trying to install it so I will tell you what happened. One note though: my epson cd is scratched and my MB cannot complete the installation from the cd drive. So I downloaded all drivers and accompanying software from the net. Strangely enough, the Network Installer is missing!! The only application I have is another one, called Network Configurator and it's not a wizard type installer. Well, time will show.