Benches Printing and scanning

13

Only Prints One Job then will not print a…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Problem

I can only print one job, if I select another job to print it does not print.

What is happening

I print one it comes out fine, but even after its out of the physical printer the job stays in the printer job list showing the completion bar all the way over but its still there. The second job is in the list and the status bar at the top says looking for printer...

If I reset the airport I can print a new job.

About my system

My system info is below and I administer the wireless from my computer. We also have an iMac intel with 10.5 on the network. I have an airport extreme that serves the wireless and then the airport express across the room that is on the network but only to attached to the printer it does not extend the network.

I have tried on both computers re setting the printer list, reset the airport, factory reset the airport, tried the fix to rename the printer, tried the IP printing thing but I can not find the driver for the printer when I do that so it does not work.

This was working with out issue until Tuesday evening, I do not know what changed, I have spent time reading the forum and looking around on line for a solution with out luck.

Please help my frustration level is rising!

Jerome

PS the printer will print via USB when hooked up to my computer.

13 replies

Sign in or join Beachball Help to reply.

  1. 0

    C. Jerome

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am sorry, I forgot to post the crucial information that my printer is an HP Laserjet P1006

  2. 0

    gyuen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have the same problem with a different printer (Samsung CLP-315). I found a quick fix that seems to work 70% of the time: Before your second print, run the Airport Utility, select your Airport and the click on Manual Setup. That's it. Try printing again. If it still doesn't work then under Base Station, select Restart... and wait till the Airport reboots. This is a very frustration and it seems to be a common problem. I hope that Apple fixes this. It seems to only affect Leopard users with some laser printer printers.

  3. 0

    C. Jerome

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This fix to restart the airport express was working for me before, if it stopped printing or communicating with the printer I could just reset it and then I would be able to print for a few more days or weeks with out issue, now I can only print one job!

    Though what you suggested along with clearing the printer job list does work to get one job printed as I am sure you know its a hassle and defeats the purpose and ease of wireless printing.

    I am thinking the issue is related to the printer program some how because after the first job actually prints it still remains in the printer list and does not fully complete, this prevents the next job from moving up in the list and printing.

    Does anyone else experience the above? Has anyone called applecare to see what they have to say?

  4. 0

    XgizmoX

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the same issue but with an HP photosmart C4200 printing from a PC. I can also fix the issue if i power cycle the base station. I just upgraded to the latest firmware using the airport utility from my mac and it seems to be printing more than one job now.

  5. 0

    Gabe Gilbeaux

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hey all, Bought a new printer on wednesday to replac my HP laserjet P1005. Had been having the same problems as everyone else. Prints one page and won't print again until i cleared the que. Well curiosity gotthe best of me when apple posted new drivers on thursday via software update. I ran the update and reconnected the old printer and wow it finally worked right. I hope this helps others with this same problem.

  6. 0

    ccowan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same problem with my Samsung ML-1630 Series Laser printer. I am connected to my airport express and was printing fine for the past 2 YEARS until the past 10 days, when it started letting me only print the first print job (1 to however many pages or copies I want). The next print job starts to act like it is going to print, but then gives the error "Operation Could not be completed. client-error-not-possible". I have tried all of the above solutions with no help. I have deleted, then added the printer back. I have renamed the printer. I have reset the printing system. I have updated the drivers. I have set the location of the printer to the IP address of the airport express. None of these work. The only thing that allows me to continue to print is to unplug the airport express and then plug it back in. Then it will allow me to print whatever job I want, but not the second job! Please help apple! Again, I have had no problems for the past 2 years on the same system and printer until recently. The only changes I can think of is maybe an automatic software update that maybe screwed some compatability up somewhere?

  7. 0

    Eugene Baker1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same issue with a Samsung CLP310 printer. Initially it would print for a few days and at some point Airport would just not let it print anymore, even though Airport Admin Utility would show the printer under (Base Station Options) USB Printer tab.

    I had to restart Airport every couple of days.

    Now it only allow a single print job then needs a restart.

    Come on Apple read some of this stuff!!!

  8. 0

    Sunshine's Mom

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same problem with my Canon printer. I was using a Canon Pixma 610 and just switched to the 620 and am having the same problem. The jobs show up but I get this message, "Error Number : 306 A communication error has occurred". If I close the lid on my MacBook, the next job prints when I wake the computer.

  9. 0

    travis27

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    surprise surprise...me too!

    My printer in this case is a Mitsubishi CP9800DW...but I'm sure the printer model is not the issue.

    Running version 6.3 of the AE driver by the way.

    John

  10. 0

    West Beverly High

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Add me to the list. Samsung ML-2510. New drivers. Everything updated. Will only print once. Horribly frustrating.

  11. 0

    Sunshine's Mom

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Now I can't print at all. So frustrating!!!! Apple please help.

  12. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Apologies in advance to all if you have already done this.

    Apple's printer troubleshooting guide is located at:

    http://support.apple.com/kb/TS1253

  13. 0

    Sunshine's Mom

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I went to the manufacturer's website and downloaded different drivers. Right now it is working. Let's hope it lasts.