Benches / Peripherals and accessories
No Audio input into Logic 9 using Firewire Solo interface
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am trying to get audio (bass guitar) into an audio track in logic. I am getting a signal to the Firewire Solo panel in preferences. I have Link and out 1/2 selected in the audio interface panel. In Logic audio preferences I have selected Firewire Solo as the input device. I create a new Audio Track and I get nothing. I have tried every option when creating a new track. I have read that many people have had the same problem in other forums but I have yet to hear a solution. Any help would be appreciated.
15 replies
Sign in or join Beachball Help to reply.
- 0
45rpm ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I create a new Audio Track
On the channel strip for your audio track, there is a place where it says "I/O." Right under that, there's a button. What does the button say?
And did you press the R button for this track (in either the track header or on the channel strip)?
Something else is to try recording with another program, like Quicktime Player. But first let's take a look at these details.
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have tried every combination but What I believe I should have on Input 1-2/ Stereo out "s" "I" "R"
- 0
45rpm ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Select Logic Pro > Preferences > Audio > Devices > Core Audio. There's a checkbox called Software Monitoring. It should be on. Is it?
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is in the audio Preferences and yes it is on but I don't see that in the Track under I/O At the bottom of the screen where the play controls are it says no input. For the record I have downloaded the latest drivers for the Interface. I am really hoping It is something I am not doing right.
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes it is checked on. Sorry that wasn't clear in the last post. I tried checked off as well. But from what I have read it should be on.
- 0
Pancenter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ADPhoto wrote:
Yes it is checked on. Sorry that wasn't clear in the last post. I tried checked off as well. But from what I have read it should be on.Software monitoring only needs to be on if you wish to monitor through Logic's audio engine. Most audio interfaces also have a direct Monitoring function which allows you to monitor the inputs of the audio device. Direct monitoring virtually eliminates latency (except for converter latency which is minimal).
So... you've created a -MONO Audio- track in Logic? You then select the track and can see the I/O channel strip on the left hand side of the page.
There are two I/O buttons right above the meter, the bottom is output and usually set to 1/2. The one right above sets the input channel of the Audio device... make sure Record is enabled then select that button, from the drop down choose Input, how many do you show as possible inputs 1, 2, 3, 4?
Play the bass and select each input until you show some input level.pancenter-
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have 4 input options on a mono track. I created four new tracks using each input . Nothing on any of them. I created a stereo track which gives option 1/2 and still no signal. To reiterate The signal is strong in the audio Interface panel for Firewire solo which resides in the Mac Preferences
- 0
Pancenter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ADPhoto wrote:
I have 4 input options on a mono track. I created four new tracks using each input . Nothing on any of them. I created a stereo track which gives option 1/2 and still no signal. To reiterate The signal is strong in the audio Interface panel for Firewire solo which resides in the Mac PreferencesDid you mention which version of Logic you're using.. and are you still on 10.5.8?
And preferences/Audio list the Firewire Solo as it's Audio device... what to you have the I/O buffer set at? Use 256.
pancenter-
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am using Logic 9 and 10.5.8. I haven't changed the audio buffer it is at 256 which must be the default
- 0
Pancenter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ADPhoto wrote:
I am using Logic 9 and 10.5.8. I haven't changed the audio buffer it is at 256 which must be the defaultDo you have -Both- Input and Output Audio devices set to Firewire Solo?
Most of the M-Audio gear will not function as an Aggregate type device.
pancenter-
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
No . Only the input is the Firewire solo . Output is either my powered speakers or internal out put for headphones.
- 0
Pancenter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ADPhoto wrote:
No . Only the input is the Firewire solo . Output is either my powered speakers or internal out put for headphones.Why do you buy an interface and then use the internal audio?
Anyway, most M-Audio hardware (as well as some others) does not function well as an aggregate audio device. What you've done is basically create an aggregate audio device. Use your hardware as intended, change the output device to the M-Audio Firewire Solo and plug your phones into the M-Audio hardware.
I'm always amazed that people spend money for a professional program, then purchase hardware to (presumably) get the most out of the software then fail to use either to their potential.
I think if you set the output to the Firewire Solo, may require a reboot of Logic, you will get audio input.
pancenter-
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How do I record my Bass with out an interface. I bought one to do that. I am not finished purchasing gear so I am using the powered speakers I have. At this point I am just trying to get it to work. Switching the Input and output to my interface didn't solve the problem. The quality difference between the headphone output from the interface and the internal audio isn't an issue until I get input to listen to.
I appreciate you trying to help me with this. It is extremely frustrating. I can hear my bass through the headphones on the interface.Still no Input into Logic - 0
Pancenter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How do you record your Bass without an interface???
Im suggestion you forget the internal audio, and let the Firewire solo be the ONLY interface, that's how most audio interfaces are designed to be used, not combined with the computers internal audio.Ok, so for now, use only the Firewire Solo for both I/O, use the headphones as well. The thing is, selecting a different output device may mess with the Firewire Solo digital clock and in that case you would get no input into Logic.
Flip the I/O buffer size to either a higher or lower number then select Apply Changes, then Flip it back to 256 and select Apply Changes.
As I recall... the M-Audio mixer software may have more than one level contro, have you looked over the manual to make sure you're not missing anything.
Oh and turn OFF Software monitoring in Preferences Audio, set the intercase to 44.1kHz and 16-bit.
pancenter-
- 0
ADPhoto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The sarcasm was lost in the translation )
I flipped the buffer size- turned off software monitoring- I set the interface at 44.1 I didn't find a 16Bit option in the M-audio panel but I clicked off the 24 Bit option in the Core Audio preferences in Logic. I can hear the bass that is plugged into the interface but no recorded Virtual instrument tracks or my midi controller.